PDA

View Full Version : New SS unit

Ssilencer
07-12-2005, 08:21 PM
1/3hp comp charged with r502, and a G-Froster X

http://fotos.miarroba.com/fotos/b/0/b0d01b21.jpg

Proc Newcastle 754 3000+ @3150 mhz 1.8v (for a load)
-51c no load
-46c idle
-40c load
GuGaCoSa
07-12-2005, 08:40 PM
What can i say,looking great again as expected,does it have any internal light?
Ssilencer
07-12-2005, 08:44 PM
Nope, it just for benching, so no extra cosmetics :)
Next will be a diferent look, with a new evap.
n00b 0f l337
07-12-2005, 08:45 PM
Hmmmm, do you have high side and low side pressures? Just interested in some numbers.
Marvin
07-12-2005, 08:52 PM
wonderfull.
congrats.
Bergo
07-12-2005, 08:54 PM
lookin' good, I like the mesh, also admire your work with the controllers, building my own ATM, so I know whats involved, alot of work, again, good job!
Ssilencer
07-12-2005, 09:02 PM
More pics

http://fotos.miarroba.com/fotos/7/4/740987fc.jpg

http://fotos.miarroba.com/fotos/6/1/610c13b8.jpg

http://fotos.miarroba.com/fotos/c/5/c5066295.jpg

http://fotos.miarroba.com/fotos/9/c/9cb363a3.jpg



Suicide shot, cant get to the windows paint at 3250mhz :(

http://fotos.miarroba.com/fotos/c/e/ce6057f9.jpg
GuGaCoSa
07-12-2005, 09:09 PM
Nice froster,next week ill tell you my impressions about my g-froster litevery well build my friend =D
shinymod
07-12-2005, 09:28 PM
freakin schweet :D
conrad.maranan
07-12-2005, 10:30 PM
Sweet-looking unit you've got there, Ssilencer. :up: I really like the side panel. And as for your clocks, just get a Newark 3700+ and you'll get up there - especially with those evap temps. ;)
Ssilencer
07-12-2005, 11:47 PM
I'm in bankruptcy righ now, maybe I can sell my NC, to get some Newark 3000+...
Where can I get one?

BTW, Thanks to Chilly1 for the complete suction line!!!
Fast
07-13-2005, 01:05 AM
nice very nice is WR;) congrat...
Ssilencer
07-13-2005, 06:19 AM
nice very nice is WR;) congrat...

WR in a NC 3000+?
Fast
07-13-2005, 06:31 AM
WR in a NC 3000+?



second www.vr-zone.com ya;)
Comp-Freak
07-13-2005, 06:43 AM
Very nice unit. The little green cable is an usb cable for controlling the g-froster?
Ssilencer
07-13-2005, 06:47 AM
The green cables it is in fact 3 cables in one, one goes to pwn on the motherboard, second goes pwr button on the case, third goes to a molex to check 5v.
Tonic
07-13-2005, 07:02 AM
I don't see what's inside the case :(
Comp-Freak
07-13-2005, 07:25 AM
The green cables it is in fact 3 cables in one, one goes to pwn on the motherboard, second goes pwr button on the case, third goes to a molex to check 5v.Hehe, so i'm wrong. No software interface yet on the g-froster?
Ssilencer
07-13-2005, 07:59 AM
Hehe, so i'm wrong. No software interface yet on the g-froster?

Yes, there is software interface, but the serial conection is installed in the back of the unit, where it belongs :D
I will take a pic of the back later.
Patrickclouds
07-13-2005, 08:37 AM
it seems for me, that you are doing some advertising for this controller than presenting a single stage unit in this "vapor phase chnage cooling" forum. :rolleyes:

please show some pics of your unit like compressor, brazing and so on ;)
thanks
kayl
07-13-2005, 08:54 AM
thats a nice unit you got there ssilencer
and a nice overclock on the newcastle, i wish mine went that well.
Ssilencer
07-13-2005, 09:10 AM
it seems for me, that you are doing some advertising for this controller than presenting a single stage unit in this "vapor phase chnage cooling" forum. :rolleyes:

please show some pics of your unit like compressor, brazing and so on ;)
thanks

Advertising is answer questions? :(

Ok, next pic is not advertising, just a a way to say thanks:
GuGaCoSa
07-13-2005, 09:16 AM
Looking very good,is it aluminion or steel?How did u 'laminate' it in lacquer?
Levish
07-13-2005, 10:06 AM
I believe the Serial connector is on top of the two a/c connectors in this picture, and a ribbon cable leading to the board (might be unhooked as yet?)

http://fotos.miarroba.com/fotos/6/1/610c13b8.jpg
Ssilencer
07-13-2005, 03:09 PM
You're right Levish
n00b 0f l337
07-13-2005, 03:19 PM
How did you make the case and what mesh/holed metal is that and where can I get some? :)
pythagoras
07-13-2005, 03:29 PM
it seems for me, that you are doing some advertising for this controller than presenting a single stage unit in this "vapor phase chnage cooling" forum. :rolleyes:

please show some pics of your unit like compressor, brazing and so on ;)
thanks

I believe the phase change system is in the background, out of the case. And probably connected to the froster in the case. Its probably being tuned under load before being fitted in the case ;)

Regards

John.
n00b 0f l337
07-13-2005, 03:33 PM
And whats wrong with advertising? The G' Is an awesome product!
Ssilencer
07-13-2005, 03:46 PM
How did you make the case and what mesh/holed metal is that and where can I get some? :)

It was a 2mts x 1mt perforated aluminium sheet.
It was made in a folding machine, then brazed and a lot of work involved.
It was made by my Friend Aitor, he is a hell of a craftman, and he made some of the better wb in the world ;)
As pytagoras said, the phase change unit was out of the case for tunning , I will post some new pics later
I think all the SS units are really similar, not the cases or electronics.

Edit
http://fotos.miarroba.com/fotos/1/1/11a626b3.jpg
REBEL900
07-14-2005, 05:21 AM
Very very nice :toast: