PDA

View Full Version : I got the 5GHz I wanted :o

r00t3d
06-29-2005, 09:21 AM
Finally I can say 'I got to 5GHz' :woot:

Setup:
Prometeia MachI
Abit Fatal1ty AA8XE
Intel 630 3.0 (costa rica)
1GB Kit OCZ 4400EB Platinum Rev2
ATI X800XL PCI-E

Attached is SuperPI run and CPU-Z
Note the bus speed it speaks for itself :banana:

http://83.142.24.250/ut2004/r00t3d/335fsb_pi_web.JPG
K.I.T.T.
06-29-2005, 09:26 AM
:toast: Well done!! what temps did you get loaded?


Note the bus speed it speaks for itself :banana:

thats 1337 allright!! :banana:
r00t3d
06-29-2005, 09:31 AM
shame the motherboard wont report subzero temps but I am estimating about -10 to -15c under load
simri
06-29-2005, 01:48 PM
wow :)
Volt's ? NB volt, NB2.5 volt, FSBVTT volt, CPU volt?
any mod?
Andrewv
06-29-2005, 02:30 PM
awesome! 334mhz wow
r00t3d
06-29-2005, 02:31 PM
no mods at all.....

http://83.142.24.250/ut2004/r00t3d/335fsb_volts.JPG
Lando95
06-29-2005, 04:40 PM
Is that vcore real? 1.7 volts? You don't want to keep that cpu for very long do ya? ;) But very nice oc!!!
death metal
06-29-2005, 05:39 PM
Woahhhhhh! Congrats!
snipper_cr
06-29-2005, 08:57 PM
LOL, i LOVE your bus speed, 1337!
r00t3d
06-30-2005, 03:22 AM
Is that vcore real? 1.7 volts? You don't want to keep that cpu for very long do ya? ;) But very nice oc!!!

The vcore is real, but i dont run it 24/7 at 5ghz that would be crazy.
I am currently running it at 4.72ghz 1.66v however I am lowering this daily after 24hour PI run to get it on the lowest volts stable.
simri
06-30-2005, 04:15 AM
Congrats man and tnx for the info

My setup:
http://www.xtremesystems.org/forums/showthread.php?t=66356
r00t3d
06-30-2005, 04:59 AM
simri: that is great similar setup to mine, what is the highest you can get into windows with? I stopped after 335fsb i will try more later.

3dmark2001se: @325FSB = 4.9GHz
http://83.142.24.250/ut2004/r00t3d/325fsb_3dmark2001se_web.JPG
simri
07-01-2005, 03:30 AM
Im only got 4802MHz unstabel in windows
i have vcore problem if im set the vcore to 1.7125v (max on bios) im only get 1.620?v (volt sensor) you have same problem?

PSU: OCZ Powerstream 520W

(sorry for my bad eng)
simri
07-01-2005, 03:43 AM
Stock volt on you CPU and FSBVTT?

My CPU Volt Default:
Vcore: 1.3625v
FSBVTT: 1.20v
r00t3d
07-01-2005, 04:07 AM
I am able to get 1.735volts on the bios and windows reports the same.. but I will check again and see what Abit EQ reports.
I am using an Antec TrueBlue 480watt PSU just for the motherboard and a 400watt PSU for the Prometeia MachI

My Stock volts are the same as yours.
fordf250
07-01-2005, 06:39 AM
Nice overclock!

I am still pushing high vcore 1.6-1.7 for 2-3 hours a day on my 640 and 630 with no problems and I am still on air cooling.How much Vcore does that mb have to give.
r00t3d
07-27-2005, 04:41 AM
Nice overclock!

I am still pushing high vcore 1.6-1.7 for 2-3 hours a day on my 640 and 630 with no problems and I am still on air cooling.How much Vcore does that mb have to give.

mboard gives upto 1.735 v