Anyone with 100% overclock (double speed from original) ?

[lktuio]

http://i6.photobucket.com/albums/y242/fairandsquare/CeleronM.jpg

Only manage to get 80% using stock voltage and hsf on air. Will try to mod the adapter and change the hsf to get 100% overclock :)

Please post the highest percentage of your overclocking results here.

Thank's !

[FUGGER]

Quite a few members have doubled the CPU speed.

I have come close.

I know Macci has reached the mark.

[Pomme]

P IV 1.6a's used to do it. guess dothans too. Also 1700+ and 1800+ AXP's with DLT3C core. Maybe try searching the forums on these ones :)

[bob(nz)]

Heh

The 1.6A was a classic chip - only got mine to just over 3GHz though - not quite doubled :shrug:

[InSanCen]

My mate (More than) doubled his XP1700, stock=1466. He hit 3.0Ghz (But soldered his RAM into the socket in the process, but managed to grab a screenie).

I've not got too close, but wait until this hot weather goes away... 2932 watch out!

[krampak]

I got a Celeron 300A to 600Mhz (when I was 12 years old I put it into my parents restaurant freezer) :banana: :banana:

[gulp35]

The LV Xeon 1.6 Chips sometimes get a 100% OC on air, and thats in dualie!

[Mauri Antero]

Hilppa is also quite close, with P4 2.8 5575 (http://www.takorautaa.net/img/imagedb/6.jpg) missing just 25Mhz

[Jamo]

theres a P2 233 @ 466+ phase cooled somewhere knocking about i seem to remember

[[XC] leviathan18]

yes old skool thread 4volts to the poor cpu

[flo850]

my 1.8 A , using watercooling :
http://img164.exs.cx/img164/6097/fsb2252ed.th.png (http://img164.exs.cx/my.php?loc=img164&image=fsb2252ed.png)
( not stable )
24/7 frequency : 3.6 Ghz / 1.75V :
http://service.futuremark.com/compare?2k1=8397219
http://arc.aquamark3.com/arc/arc_view.php?run=1292346459
3.67 Ghz ( max stable ) : http://www.ocbase.com/config_637.html


here is the thread : http://www.xtremesystems.org/forums/showthread.php?t=51649&page=1&pp=25

[KILLorBE]

69% on air (Air cooled TEC) with the system in my sig, memory running @ 168FSB 2-2-2 7/9 (Might do 5/7 with a volt mod).

I got it to POST @ 172FSB:
http://members.chello.nl/~a.bax1/PCStuff/POST172MHz.jpg

When I get my new system I'm probably gonna do some mods and see if I can bench @ 170FSB+ (Hopefully breaking 12K in 3DMark01 and become #3 of all P3 Celerons :banana: ).

[Patrickclouds]

my old amd k6-2 200mhz was able zu run stable with 400mhz.
cooling was a waterchiller.
on air it goes only to 366mhz.

[Hilppa]

Hilppa is also quite close, with P4 2.8 5575 (http://www.takorautaa.net/img/imagedb/6.jpg) missing just 25Mhz

Maybe I should give it a one more try to make it to 100% OC ;) 25Mhz is too little to live with.

[crotale]

168%
http://www.nordiccrew.com/crotale/ocsm.jpg

106%
http://www.nordiccrew.com/crotale/206.gif

And I'm thinking about giving a Celeron 325J a run for 100% in the next couple of weeks. (5066MHz) :cool:

[Jort]

P4 prescott 2.8 ghz to 3.8 ghz (water)
Amd 64 3000+ 1800 mhz to 2950 mhz (water)

[V4n{}u|sH]

WoW... That Celeron... Is INSANE!!! :woot:

[don_vercetti]

once i get water, i reckon this winter if i still have my setup i can reach 3066mhz. I'm sure as hell going to try anyway.

[macci]

some screenshot stable 100%+ overclocks I've got (most of the pics are gone cos my old solidhardware.com site is down):

Celeron 333 @ 750 (pifast at 666) water+pelt
Celeron 366 @ 735 water+pelt
Celeron 566 @ 1133 water+pelt
Duron 600 @ 1266 (pifast/superpi 1234) water+pelt
Duron 650 @ 1350 (i think I got some tests at above 1.3G) LN2
TB 1GHz @ 2170 (pifast at 2016) LN2
NW 1.8 @ 3600 (only post) LN2
NW 1.6 @ 3560MHz (superpi/pifast 3470MHz) R404
Prescott 2.4 @ 4.8GHz cascade
Dothan 1.6 @ 3343MHz (http://www.akiba-pc.com/d16g/d16g_3343.gif) cascade

[don_vercetti]

damn that's an impressive list. How do you afford so much kit?

[Disposibleteen]

get some 1.6LV Xeons and youll get a 100% OC most everytime.

[bottone]

Hmm, i'm not so much interested in the 100% part, but you're using a Celeron-M (Dothan core with 1mb)...that still does very well.

What video card are you using?

Also can you publish your 3dmark01 scores on futuremark so we can have a look at the details??

Congrats on the overclock btw, thinking of investing into one of those if my DFI+SD3700+ keep giving me as much trouble as they are..

[freecableguy]

I have gotten a pair of 1.6LV Xeons to about 115% OC.

[[XC] moddolicous]

get some 1.6LV Xeons and youll get a 100% OC most everytime.
They usually have to be D1 steppings, as far as I know.

[Kunaak]

click on the "505" in my signature.

105% overclock with a LGA775 Prescott 505.
I have also gone well past 3 ghz with a Xp1700 about 3 years ago, but thats so old that I have almost no proof of it anymore, other then a lone 2.9 ghz shot, that was no where near the tops that CPU did :(

lesson learned however.
now my good stuff, gets saved to CDR.
it may get old, but each shot has a story for me ;)

[(sin)morpheus]

I've gotten a bunch of 486 dx2-33s to 66Hz. 100% isnt that hard to achieve with old hardware. The new hardware is where its hard to achieve. Old celerons and old durons and so forth will reach a 100% OC without a whole lot of trouble.

[viili]

I've got here 4 celeron 300A's that do 600MHz @ default voltage :) 100% is TOO easy with these. How about 660MHz (+120%) on air? ;)

Edit: or +142% (http://netti.nic.fi/~hege/PiFast43/4Viili4.gif) with TEC & liquid? :D (note, stable enough to calculate PI)

[Exlua]

I coulded only 2x256MB Micron Ram(PC2100) overclocked to 220FSB 2,5-2-2-5 @3V. I know only 1700+/1800+ Tbred B ,can overclocked to the double speed....

[yodadu92]

My old P4M 1.6 in air at 1.80V :

http://membres.lycos.fr/yodadu92/overclocking/1.6@3.2.JPG

[Sink]

my axp 2000+ came throu 3dmark01 with 212*12.5 @ 2.05v
I cant even post at 213*12.5 or even 213*11.
This was on WC cpu temp. ca. 35 so im sure i could hit 3325 with a new mobo and cascade or maybe single stage.

[The Byter]

hot topic there... :)

I got my celeron 300 @ 600 with ice water
and my 1700+ @ 2911 on LN2 (21mhz short)

oc away guyz !

[piotres]

1700+ JIUHB DLT3C

On Dry-Ice :cool:

3006 Mhz/SPI 16M so stable 105 % - 1466@3006 Mhz

http://img41.echo.cx/my.php?image=133916m9op.jpg

3214 Mhz so 119 % /max screen - 1466@3214 Mhz

http://img163.echo.cx/my.php?image=32145mw.jpg

best regards
peter

[Sesto Sento]

[QUOTE=crotale]168%
http://www.nordiccrew.com/crotale/ocsm.jpg

OMG that's a crazy Celeron-M :eek2: :eek2: :eek2:

P.S: I think that's under LN2 isn't it?

[crotale]

OMG that's a crazy Celeron-M :eek2: :eek2: :eek2:
P.S: I think that's under LN2 isn't it?

No, Dry Ice. :cool:

[Disposibleteen]

most celerons OC like nobody's business, i have a Celeron D briefly that OCed up past 4.2GHz without much prodding. it was stock at 2.4GHz.

[Sesto Sento]

No, Dry Ice. :cool:

Dry ice... So imagine what it would do on LN2...

[bob(nz)]

[QUOTE=crotale]168%
http://www.nordiccrew.com/crotale/ocsm.jpg

OMG that's a crazy Celeron-M :eek2: :eek2: :eek2:

P.S: I think that's under LN2 isn't it?

Now thats what I call an overclock :fact: :explode2:

[soygul]

my old 5900xt did something like %85 reaching 700Mhz (380 def.) but that's gpu anyway :p:

[Unseen]

really close...

http://valid.x86-secret.com/show_oc?id=22902

[majormav]

the good old trusty 1700s they were awsome i had 2 that did more than the 100% overclock heres the one i used to run 3d with and pretty well she did at the time too "those were the days"
http://www.majormav.pwp.blueyonder.co.uk/1700%20screeniesr/2972cpuzgif.gif
and a piccy of the cpu
http://www.majormav.pwp.blueyonder.co.uk/1700%20screeniesr/cpu2.JPG

[KingYubbo]

Pentium 100mhz jumper overclock to 200mhz :D

[crotale]

Here is the CeleronD I was talking about

http://www.nordiccrew.com/crotale/crotale_5067mhz.jpg

http://valid.x86-secret.com/show_oc?id=23479

[wat0n]

omg, that 5 gig celeron is crazy :woot: