OCZ vs Vitesta for P4.

[AH^DK]

Hey.


For my P4 rig, I am gonna get some new ram, and it will either be:
OCZ EL Plat. Edition PC3200 (1x512mb stick).

Or 2x256mb Adata Vitesta PC4000.

What I need is some ram that will go VERY high in FSB, 260-270+.

Adata looks great because of they will go quite high although they are only 3-4-4-8 where OCZ is 2-3-2-5.

Note: Must work in a Abit AS-8.

[perkam]

Can you give us a link to a reliable online retailer in Denmark so we can make recommendations ??

Perkam

[AH^DK]

What do you mean?

Prices or?

I can get Vitestas for 140$ or a dual kit 2x256mb of OCZ for about 125-130$ note not Rev2.

[Crankster]

Get BH-5 for intel and run a divider in my opinion.

[AH^DK]

Well lets say my funds are unlimited, what would be the best ram at 3,2VDimm max?

I would prefer 1:1.

[c7775]

hi mate , i have had vitesta pc4000 running at ddr580 at 2.5-3-3-6 on an
intel i865 motherboard with PAT enabled, they did better than tccd and bh-5.
edit... at 3.1v (3.04ACTUAL measured)



the 256 mb ones do MUCh better than the 512 ive tried (ddr 556 3-3-4-6)

[WannaOC]

I noticed you are comparing a single 512 stick to the dc set, any reason? The duel channel kit would be better either way imo.

Also have you considered these? (http://www.atacom.com/program/print_html_new.cgi?cart_id=8450012_65_33_190_95&Pagecode=SEARCH_ALL&Item_code=MEDD_OCZT_AG_I7&USER_ID=www) I know its a US reseller but you might look for it near you. The Hynix D5 chips have been known to do really well on the Intels with low votlage.

[AH^DK]

Think I will go Vitesta.

Well they dont sell then in DC kits in Denmark.

[WannaOC]

Ah, that makes sense. I thought you were comparing running a single stick of 512 versus 2x256. I would go OCZ though. If for nothing else the RMA process and support would be close at hand here on the forums.

[zt_lee]

wannaoc,
how high fsb u can get? for ur signature, ur spec is nearly same wiht mine. Just want to compare :)

[WannaOC]

Well I don't have a vdimm mod done so I'm stuck at 3.2V so my ram hits the wall at 230. I've been into windows at 280 but I couldn't get it Pi stable. I actually haven't even played with the 14 divider yet but I plan to after some more mods. My new OCZ gets here on Friday so I should be able to see how far I can really go. Up, up, and away! :D