are my temps ok ? (winnie 3500@2610, 290x9, xp-120) 38 idle - 52 load @ 1.58 VCore

[flexy]

see topic.....temps measured under extreme cpu load.....eg. OCCT/prime95.

For some reason i think i once had lower temps...but could also be the hotter temps right now. (Ambient right now is about 80 F)

Is 52/53 for a winnie, XP-120 at 1.58V right ?

thanks :)

[Postal Dude]

At almost 1.6 volts on air that sounds like ok temps mate especialy at over 2.6Ghz. Is there any chance you can get ur winnie to run stable at a lower vcore?

[flexy]

At almost 1.6 volts on air that sounds like ok temps mate especialy at over 2.6Ghz. Is there any chance you can get ur winnie to run stable at a lower vcore?

i tried several times....might try again w/ one notch lower...but i remember i had some instability.

[dnottis]

see topic.....temps measured under extreme cpu load.....eg. OCCT/prime95.

For some reason i think i once had lower temps...but could also be the hotter temps right now. (Ambient right now is about 80 F)

Is 52/53 for a winnie, XP-120 at 1.58V right ?

thanks :)


I was getting 54 as load with XP90 and Silent Cat 9, then I got TT Big Typhoon and load temps at 1.53 dropped to 41, at 1.58v my load was 42. 52/53 seems a bit high.

[scorp]

Don't trust the BIOS readings ... they can be way off in some case : on a Winnie 3200+ at stock with XP120 & Papst 120mm @ 1600 RPM I get a load of 49C and with the Papst @ 1100 RPM I get a load of 50C.