30 sec./AMD 32 bit.-INSANE OC Team-Italy

[solvet]

DFI Ultramod
XP-M 2500+ by Fluc
A.Data BH5 at 3,625v
Cooled by "Dreams Cube" a Pentapelt (5 tecs) system cooling selfmade (engineered by Lunasio)
Each tec has a MeanWelll SP-320 (four)...(one tec has a ZetaGI), and has a OC 3000 for cooling and 200 L of Ethilene-Glicole (at -15°C)

Here there's the article and some photos:

Article (http://www.insanewb.com/articoli/guarda_articolo.asp?articolo=83&pagina=01)

Here:
Other photos (http://www.insanewb.com/articoli/guarda_articolo.asp?articolo=83&pagina=04)



http://www.insanewb.com/articoli/test_comparazioni/overclock/5pelt_solvet/images/screen/3352-Mhz-30-sec.gif

CPU-Z ID: 20520

There's the PI "original" at 3340 Mhz:
http://www.insanewb.com/articoli/test_comparazioni/overclock/5pelt_solvet/images/screen/3338-Mhz-30-sec.gif
CPU-Z ID: 20525

Some photos:
http://www.insanewb.com/articoli/test_comparazioni/overclock/5pelt_solvet/images/full/DSCN1098.JPG
http://www.insanewb.com/articoli/test_comparazioni/overclock/5pelt_solvet/images/full/DSCN1124.JPG
http://www.insanewb.com/articoli/test_comparazioni/overclock/5pelt_solvet/images/full/DSCN1135.JPG
http://www.insanewb.com/articoli/test_comparazioni/overclock/5pelt_solvet/images/full/DSCN3204.JPG
http://www.insanewb.com/articoli/test_comparazioni/overclock/5pelt_solvet/images/full/DSCN3197.JPG

My room...
http://www.insanewb.com/articoli/test_comparazioni/overclock/5pelt_solvet/images/full/DSCN3217.JPG

http://www.insanewb.com/articoli/test_comparazioni/overclock/5pelt_solvet/images/full/DSCN3194.JPG

This is the result with 5 tec...

http://www.insanewb.com/articoli/test_comparazioni/overclock/5pelt_solvet/images/full/DSCN3230.JPG

[WeStSiDePLaYa]

thats some insane pelt action, doubt its practical for cost, perfomance and maintenence compared to phase.

[Gautam]

My god, I don't even know which part of that overclock is the most impressive, the fact that it was done without phase change or just the insanity of those speeds..a 1.5 gig OC...not something you see every day...

[mion]

this is insane, both overclock and even more the cooling hardware

[afireinside]

OH MY F'N GOD :slobber:

Now THAT is XTREME. Very nice work.

[Rauf]

very nice! i like your cooling :toast:
is that loaded temps?
also nice thermometer :) XS :banana: ...but aren't pt-100 thermometers very expensive?

[solvet]

Thx to all...



very nice! i like your cooling :toast:
is that loaded temps?
also nice thermometer :) XS :banana: ...but aren't pt-100 thermometers very expensive?

The temp are under the Cube....so Cpu is at -46°/-38°
PT-100 are expensive in fact but it's also good for LN2..

[mion]

HOw Do you cool all of that water, I don't see any radiators, chilling water

[zabomb4163]

no one in europe uses phase change besides tom?

[harleybro]

Awesome temps.! Is that center cube solid copper?

[craig588]

I love all of those tubes. It looks like some sort of hydrolic machine.

[Stuperman]

that definately deserves the title of xtreme, WTG!!

[Kunaak]

Oh my God....

Jesus man, thats the most insane Pelt thing I have ever seen.
I have seen lots of pelt things that were pretty crazy, but nothing that ever produced any substantial results, but that there is both functional, and impressive.

just crazy ;)

[fatfreepork]

holy damn nice!

[Super strokey]

Me likes! Id call it the spider computer with all those tobes looking like legs. You should be very impressed with yourself as that is an excellent accomplisment!

[cirthix]

wow, talk about tec insanity! out of curiosity, what voltage is needed for that cpu at 2.8ghz (11*255)?

[psiko]

:slobber:

[Epsilon]

no one in europe uses phase change besides tom?
lol plz, you must be kidding about that one :D

[masterofpuppets]

Xtreme pelt setup!! :slobber: I wonder how much your electricity bill would be if you left that running for a few days :O

[Sesto Sento]

insane... the most impressive cooler i've ever seen :slobber:
time to go for <30s under LN2?

[Verdict]

:slobber:

insane and REALLY NICE, i respekt that :toast:

[Badong]

Great innovation there INSANE OC Team!! Very nice work!
How about some modern hardware action? :)

[maverick89]

nice score boys :)

[G H Z]

That is really cool!!!!

Nice looking setup and results guys :toast:

[DudeMiester]

That's just awesome!

[RoyaL]

Italy on the top of the world,BABY! :D

[Gamer]

coolest setup I have ever seen :)

[solvet]

Thx to all...


HOw Do you cool all of that water, I don't see any radiators, chilling water

It isn't water but Ethilene Glicole (only 10/15% of water...)
In the picture U can see the freezer...

[solvet]

insane... the most impressive cooler i've ever seen :slobber:
time to go for <30s under LN2?

With LN2....I have never used LN2, however it's so hard for my mobo over 260 Mhz of fsb with these frequency of cpu...
I don't know....

[L@TrO]

wow that's an insane pelt :)

[V4n{}u|sH]

Congratz ;)

[[XC] moddolicous]

wow, thats insane. I'm sure if u used LN2, u could get the record for highest A-XP clock. I think the highest is like 3.6 or 3.7. It would be great if u could get it that fast.

[trecca]

compliments :)

[Opteron96]

Jeezus, thats awesome. It`s a peltier statue :D
It`s freaking overclocking art. And i love it :D

[Mtemel]

lol nice :D

[DaWaN]

This is really extreme :banana:
But afterplaytime comes the energybill :fact:
But nice OC'ing, what CPU stepping is it ?

[TekXoID]

Awesome. :slobber:

So when are you going to ship it to me for testing? :D Hehe....I wish...

[Holst]

OMG,

I saw a tripple pelt rig and I thought that was insane... but 5 pelts... utter madness.

Awesome work, keep it up

[funkflix]

That looks so awsome! Nice Results too! :toast: :toast:

[onemorekornkid]

Nice! Congratulations

[VictorWang]

。。。OMG...5 * T.E.C = -67 , crazy !

[gloatlizard]

yeah solvet masters so much tec cooling;)

gloatlizard

[[XC] moddolicous]

what paste did u use inbetween the pelt and the block?? It looks like some white thermal grease stuff. Maybe AS5 would have lowered temps even lower.

[Sesto Sento]

maybe artic silver ceramique... for me it's even better than as5

[perry_78]

Now this is XTREME! Really nice work! Those pelts are nothing short of hillarious, though in the best of ways.

I must congratualte you on both the method and result, but you already know that :) It's like a hot girl, they always know they're hot even if you don't tell them.

Just from the time neccessary for the setting up tells you that you are insane :D

[vapb400]

That is an amazing pelt job.

[WeStSiDePLaYa]

what paste did u use inbetween the pelt and the block?? It looks like some white thermal grease stuff. Maybe AS5 would have lowered temps even lower.

most likely artic ceramique, cheaper, not conductive, and needs less break in.

[MaxxxRacer]

I think that is some sort of record for pelt action...

just freeking insane.. never seen anything like it.. 5 pelts with chilled water to cool the pelts... absolutley amazing... never would have though i would have seen somethign so crazy in my life.

[Pomme]

maybe try www.UberXtremeSystems.org ? :shocked:

[solvet]

Now this is XTREME! Really nice work! Those pelts are nothing short of hillarious, though in the best of ways.

I must congratualte you on both the method and result, but you already know that :) It's like a hot girl, they always know they're hot even if you don't tell them.

Just from the time neccessary for the setting up tells you that you are insane :D

:D Yeah
thank U very much :D

[Sentential]

holy crap how much power is that drawing?!?

[i found nemo]

woah.....*faints*

[LINOH2O]

very very nice

:clap: :clap: :clap:
great carlo, really impressive!
luna and you have done a very good work, great result
obvius that using an evaporation system it would have been easier, but the satisfaction is the construction of this infernal machine, with the right construction cost.

[wittekakker]

Hey solvet, nice tool u have over there, 5 220W TEC's :toast:
Nice OC to.


But got some questions here.
Any pics of the waterblocks inside?
And what kind of compressor has your chiller?
What are the temps on full load? Idle?
And that -67°, thats when the TEC's are just powered up, right?
I can not imagine the water is not heating up by this huge amount of heat.

[DeltZ]

lmao...that's style to the xtreme...who needs to go phase change when you can afford the electricity bill for 5 pelts :/.....

lets gets some 10,000 Watt TECS and put them under LN2 eh?

[Bennah]

Xtreme alright... props to you :toast:

[Nukke]

Extreme.. indeed...

Really nice work. Props :toast:

Nukke.

[Crankster]

Most xtreme thing i've seen!

[zoom314]

This is really an Extreme overclock alright, Great Job! :clap: :clap: :clap:

[solvet]

Hey solvet, nice tool u have over there, 5 220W TEC's :toast:
Nice OC to.


But got some questions here.
Any pics of the waterblocks inside?
And what kind of compressor has your chiller?
What are the temps on full load? Idle?
And that -67°, thats when the TEC's are just powered up, right?
I can not imagine the water is not heating up by this huge amount of heat.

A pic of waterblock inside:
http://www.insanewb.com/waterblock/cpu/oc3000/oc3000/images/canala_g.jpg
http://www.insanewb.com/waterblock/cpu/oc3000/oc3000/images/alette_g.jpg

for informations:
http://www.insanewb.com/waterblock/guarda_wb.asp?waterblock=30
idle -47/-50°
full -38/-46°
At -68° tecs were at 13,5V

[zoom314]

A pic of waterblock inside:
http://www.insanewb.com/waterblock/cpu/oc3000/oc3000/images/canala_g.jpg
http://www.insanewb.com/waterblock/cpu/oc3000/oc3000/images/alette_g.jpg

for informations:
http://www.insanewb.com/waterblock/guarda_wb.asp?waterblock=30
idle -47/-50°
full -38/-46°
At -68° tecs were at 13,5V

Nice. :toast:

[wittekakker]

It looks so professional man. Really nice, u inspired me :)

[don_vercetti]

that is jaw droppingly gob smackingly impressive. Many a64s would die to be that fast. Is that the limit, or could it get any faster?

[caLume]

this tecthing is unbelieveable :eek:

makes me happy :D

[Andrewv]

OMG ! awesome man!

[solvet]

Thx to all... :)

[mtb856]

Wow, that is the most beautiful block I've seen at these forums to date... excellent engineering on the entire setup.

So....who's going to donate an FX-55 to him? :D

[solvet]

So....who's going to donate an FX-55 to him? :D

... :D

[kempez815]

Niiice. That looks awesome. Maybe donating an FX-55 or 57 to get some awesome TEC action?

\Good work man...that thing is crazy-awesome!! :toast: :woot:

[Mr.President]

come we woukd see the 29,xx

:toast:

[alexio]

Stack them and you will have an X-stage TEC cascade :banana:

You will probably need a lower watt tec on the first stage though than on the second stage. Also the waterblock would need more surface area.

Anyway, xtreme overclock man !!!

[OmegaMerc]

crazy, grats man, im typing with one hand!! :banana:












(eating with the other :p: )

[Waus-mod]

That are some sick a-xp speeds overthere :D congrats man!!!!

Woohaa 100e post :D

[=[PULSAR]=]

How many watts are those pelts? BTW excellent job :)

[solvet]

=']How many watts are those pelts? BTW excellent job :)

5 x 226 W (at 15 v)
but i used them only at 13,5v ;)

[lupacchiotto]

nice job solvet :clap: :clap:

[solvet]

Thx Lupacchiotto :)

[Xyus89]

wow,
30s for an Athlon XP processor...

but you're cooling it's a little bit big (no offense)

xyus

[UFgatorSean]

Wow!!! now go get an A64!!!!

[solvet]

Wow!!! now go get an A64!!!!

Now i can make some practice with LN2 on AMD32 bit (I hope for 29 sec. but it's so hard..), in autunn I try with a64...

[Frostologe]

Xtreme.
LN2 will hopefully give you the 29s but 30s is allready insane.

[sysfailur]

Solvet... that is a REALLY impressive waterblock setup! Can you show some more pictures of the setup? Also, what wattage pelts?

PS: Your article isn't loading for me. I'm getting an ad page.

[Sesto Sento]

great to hear those news solvet... now u should aim for 2 new WRs...
AMD 32 bits Total mhz (36xx mhz) and superpi WR...
Wish u luck man

[solvet]

Solvet... that is a REALLY impressive waterblock setup! Can you show some more pictures of the setup? Also, what wattage pelts?

PS: Your article isn't loading for me. I'm getting an ad page.

The links are ok now. (but it's only in italian...)
However U can see some photos
I've used 5x 226w tecs (but only at 13.5v)
Bye

[computersmsa]

Very nice cooling !
I have made a french news : http://www.bel-hardware.be/forum/viewtopic.php?id=562
When you will product and sell it ? :D

[funkflix]

Very nice cooling !
I have made a french news : http://www.bel-hardware.be/forum/viewtopic.php?id=562
When you will product and sell it ? :D

The link on ur startpage is the same as for the fx57 news! Fix it. ;) :D

[computersmsa]

Good eyes :D
Thanks men :P

[funkflix]

Good eyes :D
Thanks men :P

Np mate, now u can give me some rams as an present! :D :p:


Ontopic:

Damn, as longer i see this tec, i love it, never seen such a great work before! :toast:

[computersmsa]

Ok, you give me money and I give you some rams :D

[funkflix]

;) :eek: