OMG, SICK SICK SICK!! Venice 2972mHz 1M AIR stable!!

[charlie]

Yeah, what can i say? Monarch and the overclocking GODS have dropped a golden one in my lap :D Too bad it's going for a plane ride next week ;)

It's a:
LBBLE 0515 FPBW

And has a fairly high batch number...

Coupled with my MUSHKIN Redline, I'm getting BIG numbers... REALLY BIG. Here's the config:

Venice 3500+
DFI nF4 ultra-D
MUSHKIN REDLINE XP4000 (2 x 512mB)
Coolermaster Hyper6 w/ 3000rpm quiet fan/ AS5
BBATI X800XL
Rosewill RP550 PSU (no that's NOT a typo)
Ambient air 24C
Vcore 1.64v
Vdimm 3.61v
Idle 36C
Load 54C

BIOS 0510-2
Yellow slots

With the venice, I need to tune the DDr a bit differently, they're running out of steam at 270... will try 3.7v :eek2:

http://www.xtremesystems.org/forums/attachment.php?attachmentid=30899

http://www.xtremesystems.org/forums/attachment.php?attachmentid=30901

[eva2000]

nice what bios and dimm slots you're using ?

[STEvil]

darn.. should go donate some organs so I can afford an X2 :P

[charlie]

Oh and here's the OBLIGATORY SS

eva, yellow and 0510-2

http://www.xtremesystems.org/forums/attachment.php?attachmentid=30903

[mrlobber]

Charlie, why don't you play on lotteries? Based on your cpu luck, I guess, you'd do pretty good there :D

An uber Venice there :up:

[Dissolved]

great chip, i have a week 12 that does 2.6 easy, seen someone bust around 2.85

So thise venices seem to have better luck then the winnies did.


id bet you could run the vcore a lil lower if you tryed.. 54c load seems a bit hot, but your not gonna keep the chip, so hopefully the second hander will get a nice 3ghz range clock. :toast:

[saaya]

seems some of those new venice chips are realy sweet :D

troman hit 2920 with 1.63v and the stock heatsink
http://www.xtremesystems.org/forums/showthread.php?t=63015

peter lu hit 2800 with 1.4v and an xp90
http://www.xtremesystems.org/forums/showthread.php?t=63010

cant wai to get a venice myself :D

[Onepagebook]

Master, tell you what , that 's not sick yet.
Now all the 0517 Taiwanese friends got are like 1.32v 2700(9x300)
some one them like Peter Lu, he got a 1.32v 2800 mhz prime satable.
Just FYI;)

I am talking about Venice 3000+..0517 is the golden week code for it :)

[s7e9h3n]

Nice Charlie,
I've gotta pick me up a pair of those Mushies. Then again, I really can't complain about my 4800ff's :p: Here's my 3200+ 0515 APAW on stock cooler :
http://img76.echo.cx/img76/3342/10x2901ey.jpg
6600GT @ 562/1126, no major tweaks:
http://img55.echo.cx/img55/669/3dmark25k6yk.jpg

http://img76.echo.cx/img76/1336/10x3003jr.jpg

And I just did this last night with a Hyper6:
http://img281.echo.cx/img281/4245/10x290spi32m0fb.jpg

I think she's got a lot left in her and if it wasn't for my GF-who decided to beat up the condenser on my Mach2- I'd have this chip frozen already. Nevertheless, I'm may just try it anyways..... :p:

[EMC2]

Nice CPUs guys :D

Bummer on your Mach2 s7e9h3n... now you'll have to get a Chilly1 cascade :lol:

[Gautam]

Results of one of my friends, all air

http://valid.x86-secret.com/cache/17354.png

http://i6.photobucket.com/albums/y238/Adrayic/SP1M_2950.jpg

http://i6.photobucket.com/albums/y238/Adrayic/SP32M_2900.jpg

More info (http://www.ocforums.com/showthread.php?t=386270)

[charlie]

Fan speed 0rpm and 15C core temp...AIR? Yeah, maybe in Antarctica :stick:

C

[ADM]

Fan speed 0rpm and 15C core temp...AIR? Yeah, maybe in Antarctica :stick:

C

LOL, yeah you never know. :P By the way good stuff with that chip, I wish my San Diego would do that on air! :D

[charlie]

I'll try strapping a Vantec Tornado on it and shoot for a 3gHz 1M run... that'd be the "ultimate goal" for an air-cooled Venice. My SD only was superPi clean at 2920, and my BEST FX55 went 3006mHz 3D stable out on the patio at 15C. This is probably the BEST clocking A64 i've EVER had!

C

[oasked]

Passing 1M Super Pi is hardly stable, 32M is more like it.... :)

Still though, nice results there! :slobber:

[Gautam]

Fan speed 0rpm and 15C core temp...AIR? Yeah, maybe in Antarctica :stick:

C
Canada actually.

[charlie]

A little 3D action:

24C Ambient

http://www.xtremesystems.org/forums/attachment.php?attachmentid=30920

[Fintas-XP]

My venice 3200+ LBBLE 0517 BPEW can do this
http://pwp.netcabo.pt/Fintas-XP/2989.jpg

[The Mofo]

damn Charlie! :eek2:

[TEDY]

Master, tell you what , that 's not sick yet.
Now all the 0517 Taiwanese friends got are like 1.32v 2700(9x300)
some one them like Peter Lu, he got a 1.32v 2800 mhz prime satable.
Just FYI;)

I am talking about Venice 3000+..0517 is the golden week code for it :)

what stepping CBBLE or LBBLE ?

yeah seems 0515 or/and 0517 are the best

[s7e9h3n]

I'll try strapping a Vantec Tornado on it and shoot for a 3gHz 1M run... that'd be the "ultimate goal" for an air-cooled Venice. My SD only was superPi clean at 2920, and my BEST FX55 went 3006mHz 3D stable out on the patio at 15C. This is probably the BEST clocking A64 i've EVER had!

C
I'm getting closer ;)
http://img31.echo.cx/img31/6974/10x295spi1mcut9lp.jpg

[iboomalot]

My venice 3200+ LBBLE 0517 BPEW can do this


almost 3ghz and 300 FSB and you are at 32 secs???


what horrible ram timings are you using??? 4-5-5 ???


100 mhz less and this on same CPU

http://www.extreme-computers.pt/imagens/record.jpg

[s7e9h3n]

almost 3ghz and 300 FSB and you are at 32 secs???


what horrible ram timings are you using??? 4-5-5 ???


100 mhz less and this on same CPU

http://www.extreme-computers.pt/imagens/record.jpg
Maybe cuz he's using a -1:1 divider?? :p:

[jellybeard999]

nice....

great latencies too....

[(sin)morpheus]

Yes, very nice overclock. I need to move my butt and get a new cpu.

[Adrayic]

Fan speed 0rpm and 15C core temp...AIR? Yeah, maybe in Antarctica :stick:

C

I am the friend Gautum is referring to. Just to clear some things up -- those results were obtained w/ my tower sitting next to my padio door on a cool night. (ambient air temp was approximately 10 degrees celcius). I used a XP-120 w/ Panaflo M1A fan.

-Adrayic

[charlie]

I am the friend Gautum is referring to. Just to clear some things up -- those results were obtained w/ my tower sitting next to my padio door on a cool night. (ambient air temp was approximately 10 degrees celcius). I used a XP-120 w/ Panaflo M1A fan.

-Adrayic

Yeah, that's cool... just don't know why he posted it, this thread is about VENICE 3500+!!

[ozzimark]

charlie.... :slobber:

think you could get that to 3ghz with a bit of tweaking? i'll be even more stunned :banana:

[[XC] moddolicous]

wow, those are some nice results. So whats officially better as far as clock for clock and stuff: Venice or San Diego??

[Fintas-XP]

3ghz 1mb pi :D
http://pwp.netcabo.pt/Fintas-XP/3004wc.jpg

need BH5 :)

[x3ro]

:slobber: :slobber: :slobber:

That are some nice oc's.. The only problem is the 3200+ isnt for sale yet in Holland.. Only the 3500+.. and its to expensive for me.. :rolleyes: :mad:

[[XC] moddolicous]

so wait, whats the better chice: Venice, Sandiego, or clawhammer???

[Jolli]

What is diffirent between CL 2 or CL 1.5?

But, nice Venice u got C.

Jolli :)

[charlie]

3ghz 1mb pi :D


need BH5 :)


nice watercooling... I was trying for 3g (superPi 1M) on 24C ambient AIR... you should be able to pull down 3100mHz at least.... get back to work :D

C

[rcofell]

Hey Fintas-XP, would you mind compressing that pic a bit or making it an attachment, it's almost 4megs and takes a while to load. :S

[Jaco]

Mr C,
check this out
3800+ Venice LBBLE 0515 GPAW

SuperPI 32M
http://users.pandora.be/taye/pics/Venice%20246x12%20superpi32M.JPG

Daily settings :
http://users.pandora.be/taye/pics/PRIME%2014h%202856Mhz%201,48vcore.jpg

CPU watercooled.
For some strange reason 250x11 is not primestable yet. I've been playing with Drive strength/Data strength/TREF settings for hours , no luck yet. My windows is pretty fu*ked up from all this wild memory tweaking :p:
I'm using bios 4-14/3 which doesn't seem good with the Venice.

I'm gonna try bios 5-10/2 and reinstall winxp - i have a feeling this will bring :banana:

[politenessman]

nice watercooling... I was trying for 3g (superPi 1M) on 24C ambient AIR... you should be able to pull down 3100mHz at least.... get back to work :D

C

howdy. i was reading your first post and noticed that i have the same chip as you, but got mine @ newegg. i have basically same rig as you but cant get mine above 2900 on air, and its only 3d stable. i have to set vcore to 1.66 or higher to get this speed. temps are fine. xp/90 with 92mm(not tornado, but almost). any tips you can throw my way will be appreciated. i really wanted to break 3g before going to dual core. btw which of the numbers is the batch number and how do i know if its low or high?

3500 @ 9x322 1.68v lbble 0515fpbw
2x256mb g.skill la @ 322/2.5/3/7/3 2.93v
ultra d 414-1 bios
850xt
550 tru control
xp pro sp2

ps ive had winchesters at this speed and find they have somewhat higher bandwidth at the same settings. also getting slightly lower 3d scores with the venice. is this happenning to you?


very truly yours,
politenessman

[esdee]

Once again charlie prooves that he has the midas touch!!! ;)
nice results :D

[k|ngp|n]

great work charlie. I need to catch up on diego/venice stuff, been pretty damn busy with pent m and learning intel /p4c/p4p clocking...when are you going to run one of these new fx-55's below -60c?

[charlie]

great work charlie. I need to catch up on diego/venice stuff, been pretty damn busy with pent m and learning intel /p4c/p4p clocking...when are you going to run one of these new fx-55's below -60c?

thx... yeah I've got a lot of work to do. I just got my autocascade from chilly1, I have a Dothan setup ready minus the CPU (I need to get one this week) and then I see the FX55/SD ready too....

So much silicon.... so little time.

C

[wampir]

Here is My venice

3000+ 517 EPAW


http://img.photobucket.com/albums/v358/lwampir/superPi/3ghz-1M-11.jpg


and


http://img.photobucket.com/albums/v358/lwampir/superPi/2930mhz-1.jpg

[charlie]

oh... no cold BUG either.

-62C LOAD

http://www.xtremesystems.org/forums/attachment.php?attachmentid=31012

[kappa2001]

that is really great :slobber: :eek: :eek:

[esdee]

charlie what cooling?

[2fink]

charlie what cooling?

http://www.xtremesystems.org/forums/showthread.php?t=63466 auto-cascade

[magg]

Damn, I'm jealous...I'm still trying to get my winchester stable at 2.7, lol :D

Those are some amazing screenies guys, nice to see the newer gen chips clocking so much higher.

Charlie, that RAM :slobber:
That stuff is RIDICULOUS...I was thinking of getting some VX, but that stuff looks great too.

So much silicon...so little time
Must be nice, lol :p:

[Lithan]

Charlie, how high is the batch number on that chip? Above 600? Because I just got the exact same stepping with an upper 500's batch number (retail 3200+ from newegg) and I'm getting excited while I wait for My RMA's (I have a gigabyte and a DFI BOTH being RMA'ed right now) to return.

[charlie]

Charlie, how high is the batch number on that chip? Above 600? Because I just got the exact same stepping with an upper 500's batch number (retail 3200+ from newegg) and I'm getting excited while I wait for My RMA's (I have a gigabyte and a DFI BOTH being RMA'ed right now) to return.

over 1000 actually.

[Lithan]

Sweet.

My 3000+ 0516 LBBLE was over 1200 and seems fairly good for the week/stepping, though it's low/average for venice overall. It seems batch numbers dont mean as much for these as they did for AXp's (I noticed with Xp's low batches would consistantly clock upwards of 200mhz+ above identical steppings with higher numbers.)

[dave164]

Nice, ive got same CPU as that, but having really bad problems with RAM :(

Whats some good ram for overclocking this? G.Skill PC4400 LE?

[Lithan]

Try something other than tccd. I've had three chips now that don't like TCCD. A Venice, A Winny, and a Winny Mobile.

[PanaBob]

great to know I just got a LBBLE 0515 FPBW from Monarch as well so they havn't run out of those yet
hope it clocks as well under my Maze4

since these are cooler running I wonder If I should hookup a TEC again. The Clawhammer was too hot for it though : /