Acer 1691WMLi @ 1.9Ghz = 39.078s SuperPi

[SwimmerBoy]

Eh eh

I begun on testing my laptop computer...

Sonoma 1.6GHz & 533MHz FSB & 2Mb L2 cache @ 1923Mhz

http://img278.echo.cx/img278/2444/swimmer39s3fl.th.jpg (http://img278.echo.cx/my.php?image=swimmer39s3fl.jpg)

++++++++++++
Original Batery Modes:

133 x 12 = 1600Mhz -> Mems @ 4:5 @ 166MHz @ 2.5-3-3-7
133 x 6 = 800MHz -> Mems @ 4:5 @ 166MHz @ 2.5-3-3-7
102 x 6 = 600MHz -> Mems @ 4:5 @ 127MHz @ 2.5-3-3-7

---------------

Now I need help...

My multi is from 6x to 12x & my voltage is from 0.7v to 1.308v

How can I get more multi or more voltz?! Does anyone know any memory tweaker for i915PM/GM/GMS ?!?

[[]]

[macci]

Nice :)

For more Vcore You could try the VID-mod (http://www.akiba-pc.com/d16g/cascadepics/vid_mod.jpg). But the CPU shouldn't have any problems going past 2GHz w/ default voltage. If your hitting a wall there its more than likely not the CPU at that point.
Multiplier wont go higher than 12x.

[SwimmerBoy]

Nice :)

For more Vcore You could try the VID-mod (http://www.akiba-pc.com/d16g/cascadepics/vid_mod.jpg). But the CPU shouldn't have any problems going past 2GHz w/ default voltage. If your hitting a wall there its more than likely not the CPU at that point.
Multiplier wont go higher than 12x.

True...I was thinking on that... I'm using the CPU on Laptop motherboard... I think that memory or motherboard its the real problem with this....

However, 300MHz overclocking on a laptop computer, for me, is real amazing :P

I only wanna find out where can I find a memory tweaker for this!!!

Anyway, about the vid-mod, what will this do?!

[saaya]

nice oc! :)
thx for the link macci :toast:
about a memory tweaker... hmmm i dont think theres a tweaker that works on this plattform :(

nice sig btw :D

[The Stilt]

nice oc! :)
thx for the link macci :toast:
about a memory tweaker... hmmm i dont think theres a tweaker that works on this plattform :(

nice sig btw :D

Systool (http://www.techpowerup.com/systool/) works just fine ;)

[SwimmerBoy]

Thanks for the support...I'll try systool :p:

My sign?! LOL

I'll get back with some good news (I hope)

[SwimmerBoy]

Bad News :(

http://img269.echo.cx/img269/1774/badnews6zb.th.jpg (http://img269.echo.cx/my.php?image=badnews6zb.jpg)

[uscfan]

how the hell do you overclock a laptop? I just dont get it. Some dude did a volt mod to his dothan on a dell mobo and overclocked. Are the system builders adding in overclocking settings now or are there applications to do the job?

[fatfreepork]

clockgen/raisefsb

[SwimmerBoy]

By increasing the FSB we overclock all PCs... I remember that my 233MMX was working @ 266 just by increasing the FSB...

In here there are no BIOS to change (yet I hope) but nowadays software does almost everything (no toasts available yet :p: )

[Ref]

Acer 4601 WLMi
Dothan 1.6 @ 1.98 GHz
SuperPI 1M - 37.390 sec.
stock vcore, could run it at lower (1.2 V), but didn't bother again :p:

btw for some of you who haven't found out: you can lock your PCI freq in setfsb :toast:
however not PCIE too :D
because with higher FSB my NB BSODs - it is not even 3D stable over 1900 MHz.

http://valid.x86-secret.com/show_oc?id=19817
Dothan @ 2 GHz VALIDATED

[masterofpuppets]

Ooh laptop overclock! :D

[SwimmerBoy]

btw for some of you who haven't found out: you can lock your PCI freq in setfsb

How?

[Ref]

You see i have my PCI locked ...
Look @ this pic
you can select your PCI freq here
one position means LOCKED :toast:

[i found nemo]

39 seconds for me is 2.3ghz and ram @ 231 ...damn those dothans are quick

[SwimmerBoy]

Hum...nice...I've to try a higher clock with PCI locked;)

[FxDi@mOnD]

Great Swimmer!God clocks here! 39s in a laptop is beautiful!
Try to lock and test!

[jrw]

Im getting a 1.8GHz Sonoma laptop tomorrow. This looks promising :D

[SkYm@cHinE]

That was a good score Swimmer!
29s in a laptop...good ;)