PDA

View Full Version : Abit bios updates

EQuito
12-12-2002, 05:51 AM
BD7II/BD7II-RAID: v.CQ
BE7 / BE7-RAID: v.CW
IT7 / IT7E / IT7-MAX2: v.CP
IT7-MAX2 V2.0: v.CV

http://fae.abit.com.tw/eng/download/bios/i_new.htm#P4
Jupiler
12-12-2002, 10:45 AM
Thx for the update.
ASRaiven
12-12-2002, 10:59 AM
Anyone modded it yet? :) thanks for the update.
Jupiler
12-12-2002, 11:26 AM
Give me a couple of minutes, have to check for any changes first.
hipro5
12-12-2002, 01:30 PM
Thanks man....;) :toast:
Jupiler
12-12-2002, 02:10 PM
For those who'd like to try the new modded CV bios, you can DL it here (USE AT YOUR OWN RISK) :

http://users.skynet.be/MetalHead/IT7Max2_v2/ModdedCV.zip

THIS BIOS IS ONLY FOR THE MAX2 V2.0, NOT FOR THE OTHER VERSIONS

No big changes, memory up to 3.2V and all PCI dividers, as usual. :)
I flashed it and it's working OK for me. Ran some 3DMarks, SuperPi and Pifast.

I noticed something in this bios that I haven't seen before. Or maybe I missed it.
There's an option to enable/disable "Disable unused PCI clocks". First time I ever noticed it. I don't know what it means either
JDLT1
12-12-2002, 02:48 PM
Is there any way Jupiler or some one else could post modded bios for the IT7-MAX Thant would be great I could even host them if needed.

LMK

JDLT1
Jupiler
12-12-2002, 03:06 PM
I'll give it a try. But I can't test the bios, as I don't have the IT7 anymore, so you're on your own for this.
So, use at your own risk
Give me a couple of minutes.
Jupiler
12-12-2002, 03:29 PM
Here you go, modded CP bios for the IT7-IT7E-IT7Max2 v1.0.
Memory up to 3.2V and all PCI dividers.
There were 2 bios's on ABIT's site, 1 for the IT7 and 1 for the Max2 but they're the same. So says the readme.txt too.
As said before, USE AT YOUR OWN RISK. This bios hasn't been tested by me and I will take no responsibility if something goes wrong.

http://users.skynet.be/MetalHead/IT7/ModdedCP.zip
JDLT1
12-12-2002, 03:41 PM
Will try it out!

Wish me luck

JDLT1
Jupiler
12-12-2002, 03:42 PM
Originally posted by JDLT1
Will try it out!

Wish me luck

JDLT1

I certainly will. ;)
Normally, it should work. Simply run the "runme.bat" file in pure DOS mode and the bios will install by itself.
Keep me updated if everything's ok.
JDLT1
12-12-2002, 03:55 PM
Everything is fine ther good as you can see I'm back up and runnig with your new modded bios thanks Jupiler!

JDLT1
Jupiler
12-12-2002, 04:01 PM
OK, glad to see it's working.
DoGMaN
12-13-2002, 04:03 PM
Nice. Anything noticable? Is it worth the flash?
Frankie
12-16-2002, 12:15 PM
Still hanging with TH7-II...not many updates available later
MototheT
12-25-2002, 05:19 AM
Could you mod the bios for the BD7II as wel, Jupiler?

that would be :cool:
Schweatyballs
12-28-2002, 04:29 PM
Thanks :)
Jupiler
12-28-2002, 05:06 PM
Originally posted by MototheT
Could you mod the bios for the BD7II as wel, Jupiler?

that would be :cool:

Sorry, there isn't much to change in the bios. Only the PCI dividers can be changed but not the memory voltage, 2.7V is the max the bios gives.
Schweatyballs
12-28-2002, 05:07 PM
Any special bios for the BE 7-raid? ;)