View Full Version : LianLi posibilities...
ZENNZZO
05-16-2005, 12:42 PM
The subject of putting a Phase cooler in a case has come up to me time and time again...
I seen a simular case in the Phase gallery.
It is a LianLi with 6 x 5.25'' bays and 3 x 3.5'' bays
So I dug out a 1/2hp Tecumseh and am doing a mock-up.
Any suggestions will be happily accepted...
n00b 0f l337
05-16-2005, 12:59 PM
Sounds cool, keep us posted.
mesyn191
05-16-2005, 02:09 PM
This is probably stupid, but...
Couldn't you put the compressor on its side by mounting it to a L shaped piece of metal (for shock absorption) or just bolting it sideways to the inside of the case so that the wire connections are facing up inside the case and wouldn't be projecting outside of it?
wdrzal
05-16-2005, 02:16 PM
Compressors have a internal lubracation system, they must be mounted with the base plate down.
mesyn191
05-16-2005, 02:23 PM
Yup thought it was stupid. :slap:
Thank you massa wdrzal for the larnin' :slapass:
MaZeR
05-16-2005, 03:20 PM
That condensor looks quite small, do you know it's heat rating? Might be something to look into.
gclg2000
05-16-2005, 05:15 PM
Indeed it is small, i recieved one just like it in the mail today!
I need to buy a couple more of these for future projects before they run out!
Eradicator
05-16-2005, 08:26 PM
Indeed it is small, i recieved one just like it in the mail today!
I need to buy a couple more of these for future projects before they run out!
Where are you all getting these small condensors?
Thanks..
eshbach
05-16-2005, 08:34 PM
Where are you all getting these small condensors?
Thanks..
chilly is selling them.
i got one from him, it's nice.
ZENNZZO
05-17-2005, 04:46 AM
I was skeptical at first too but they work xcellent...
they have mounts already for a 120mm fan and are certianly capable of producing mid to high -40's loaded with an R22/R290 blend... ;)
http://www.xtremesystems.org/forums/attachment.php?attachmentid=30621
http://www.xtremesystems.org/forums/attachment.php?attachmentid=30620&stc=1
nice.
if ya do some subcooling calculations will tell ya if condenser is too small
ya want about subcooling of 5 to 8 degF.
for more information check this out.
http://www.xtremesystems.org/forums/showthread.php?t=47815
im guessing that compressor is a matsu:banana::banana::banana::banana:a compressor, nice cheap little compressors those.
they make nice little coolers and use little power
ZENNZZO
05-17-2005, 06:47 AM
nice.
if ya do some subcooling calculations will tell ya if condenser is too small
ya want about subcooling of 5 to 8 degF.
for more information check this out.
http://www.xtremesystems.org/forums/showthread.php?t=47815
im guessing that compressor is a matsu:banana::banana::banana::banana:a compressor, nice cheap little compressors those.
they make nice little coolers and use little power
Yeah it the Matsushlta off e-bay for 25.bux...
Thanx for that link...that all makes sense to me now, after I have build a few rigs...
It all comes together after you do this for a while...
I'm still learning, and that's a good thing... ;)
learning and also making some fine coolers too zennzzo :toast:
i have played with my fare share of those compressors
arnt they so quiet. :D
alot of ppl are using these compressors.
zennzzo i think you will make nice cascades one day. :D
ZENNZZO
05-17-2005, 07:04 AM
zennzzo i think you will make nice cascades one day. :D
Thankz kayl,
Someday, when I know exzactly what I'm doing...
I will go for it... :toast:
I really need to get into a bigger shop with better 110Vt service...
I hate to think about how hot the 110vt/15amp circuits get now ;)
hehe 240v volts here more bag for an amp