View Full Version : 4000+ Claw @ 3424Mhz = WR!
Jasonhk
05-14-2005, 11:48 AM
Hey Guys.
Me and Neosteve (My Partner) Decided to try some Dry Ice on his 4000+
Anyway. Here is what happened :bigsmile:
3424Mhz for 4000+ Clawhammer Still need to get a verified CPU, Will come next week. :bigsmile:
http://www.net-forums.net/galleryimages/1115842490/gallery_3198_15_61146.jpg
SuperPi: 26.344 ( Got slightly lower, but didn't save.)
http://www.net-forums.net/galleryimages/1115842490/gallery_3198_15_21011.jpg
More to come next weekend. :clap: .Also some SLI 6600GT Action! :bigsmile:
MeTsU
05-14-2005, 11:50 AM
Hats off to you guys! That's an incredible achievement! You've done South Africa proud! Well done and I'm looking forward to the next set of action shots!
Matt
V4n{}u|sH
05-14-2005, 11:56 AM
Very nice :)
harleybro
05-14-2005, 12:57 PM
Congrats to you :toast: guess I will have to push mine a little further now. ;)
majkel84
05-14-2005, 01:03 PM
Nice job guys !!!
I like seeing a WR taken to Africa, gj guys, get the 6600GT SLI-WR too :woot:
saaya
05-14-2005, 05:04 PM
sorry, but i think the wr is 3450mhz :(
http://www.vr-zone.com/ocdb/data.php?id=529&intel_or_amd=amd
equlizer
05-14-2005, 10:39 PM
Yeah another 26mhz and you`re there.
Great results , :clap: What stepping is that 4000+ ?
Jasonhk
05-14-2005, 11:05 PM
sorry, but i think the wr is 3450mhz :(
http://www.vr-zone.com/ocdb/data.php?id=529&intel_or_amd=amd
Thanks Saaya for notifing us. I just checked here http://www.xtremesystems.org/forums/showthread.php?t=59753
We thought the record was that but no worries, the chip still has bit of headrom left.
:banana:
Jasonhk
05-15-2005, 12:01 AM
my son ---->put ln2 on it :D
my father ---->try get me ln2 in South Africa :rolleyes:
MeTsU
05-15-2005, 12:08 AM
Ah...sorry to see it's not the WR, but...I'm sure you'll be able to take it this coming weekend! Go for it guys! :clap:
massman
05-15-2005, 02:01 AM
:banana: nice
SIOUX
05-15-2005, 02:15 AM
Great Job Guys :)
MeTsU
05-15-2005, 02:32 AM
I have to say "Well done guys!" once again. This is an incredible achievement :) I'm sure this is going to make some headlines! Do you guys know what kind of temps you where getting?
wedfighter
05-15-2005, 02:40 AM
what the batchcode anyway?
that's an amazing result!
Jasonhk
05-15-2005, 02:52 AM
what the batchcode anyway?
that's an amazing result!
it's a 044? will check sometime :banana:
saaya
05-15-2005, 12:47 PM
come on, keep pushing it :D
do you think you can squeeze some more out of it? :D
harleybro
05-15-2005, 01:21 PM
JasonHK did you remove the IHS yet? Do you know how much you gain from doing so since mine is still on. :)
Jasonhk
05-16-2005, 04:43 AM
JasonHK did you remove the IHS yet? Do you know how much you gain from doing so since mine is still on. :)
heat spreader still on , dry ice tube not mounted to cpu just resting on top :D
PowerSlide
05-16-2005, 04:45 AM
nice job..woohoo :toast:
lilsi
05-16-2005, 06:25 AM
nice one, great to see that 3.4+ is getting the norm for WR's now
saaya
05-16-2005, 06:55 AM
http://www.xtremesystems.org/forums/showthread.php?p=865021
sorry to break this to you :(
lmao lilsi! 170W tec on an fx5200? thats sooo overkill! :D
Jasonhk
05-16-2005, 07:17 AM
http://www.xtremesystems.org/forums/showthread.php?p=865021
sorry to break this to you :(
lmao lilsi! 170W tec on an fx5200? thats sooo overkill! :D
No thats cool, that was our test run.we went even expecting that..and we though the WR was 3420Mhz..so we stopped..And the Dry Ice Tube was just resting on the CPU And the Dry Ice Peices were just big peices we used for testing, next time we will mount it properly to the motherboard / cpu and use pellets :banana: :banana:
Xyus89
05-17-2005, 10:36 AM
well done :)
Dry ice just is fab for us fanatics =D
Hopefully I'll get the chance once also.
untill then.. air :banana:
Xyus
Neosteve
05-18-2005, 01:50 PM
Hey guys thanks for all the responses. :D
Well seems like our record was short lived but that’s ok nice to have some competition :p: , anyways we never really aimed for the record if we did we would of tried harder and prepared.
Hopefully this weekend we can try again and prepare better ;) and see what we can do. Im sure there’s still quite allot more headroom left in my cpu.
:banana:
Heres the steppings.
ADA4000DEPAS
CAA2C 0445MPMV
1159633L40073
harleybro
05-18-2005, 02:20 PM
Keep pushing it Neosteve. I seem to get mine to clomb a little higher each weekend. BTW let Jasonhk know I'll shoot him a pic of my tube once I pull it off. :)
Jasonhk
05-18-2005, 08:35 PM
Great guys.. I might get some pics up from this weekends benching sesion.
Jasonhk
05-18-2005, 08:38 PM
Also i don't think our chip likes deviders. We run 1:1 with our BH5 got the BH-5 to 285Mhz 1:1 as we say we wernt axcepting it or anything, so we didnt really try to hard.
Jasonhk
07-05-2005, 05:07 PM
Update
LN2..
3614.15 Mhz - Validation File Corrupted :( Please someone try make this pic clearer. Linky - Please (http://benching.sa3doc.co.za/3614SCREENmhz.JPG)
3605Mhz - Same Corrupted
3524Mhz - Works.
Validated (http://valid.x86-secret.com/show_oc?id=26324)
http://valid.x86-secret.com/cache/26324.png
More Info! Here..please click (http://www.sa3doc.co.za/modules.php?name=News&file=article&sid=21&mode=&order=0&thold=0)
And pictures :D (http://www.sa3doc.co.za/modules.php?name=coppermine&file=thumbnails&album=11)
And then the CPU died. :( :( :( :(
harleybro
07-05-2005, 07:57 PM
Very nice! Did you get an actual screen shot of it? If so you can submit that to vr-zone.
bachus_anonym
07-05-2005, 08:47 PM
wow! 2.016vcore ??? How did it die? Was voltage that killed it?
EDIT:: Also, was seran wrap your only insulation on the mobo? Man, I would be a bit shaky during bench session like that :D
I could clear it enough for me to be able to see... but not indisputable... the 3s really are bad. But I see why it died... nice voltage ;)
Jasonhk
07-06-2005, 01:04 AM
Very nice! Did you get an actual screen shot of it? If so you can submit that to vr-zone.
Thanks. No, we get validation files before we save the screenshots, at it crased before that..ahh crappy..
Please can someone try sharpen that screen shot or something..if you can. :/
Jasonhk
07-06-2005, 01:08 AM
wow! 2.016vcore ??? How did it die? Was voltage that killed it?
EDIT:: Also, was seran wrap your only insulation on the mobo? Man, I would be a bit shaky during bench session like that :D
There was a layer of neoprene on the board as well. And 2 layers of seran wrap. The board survived, with hardly any condensation ect. But yea i think the voltage.
http://picz.sa3doc.co.za/tombstone.jpg
Jayw28
07-06-2005, 01:10 AM
nice oc
:D
Jasonhk
07-06-2005, 01:16 AM
nice oc
:D
Thanks.
Here is a piccy of the insulation we used on the board for Dry Ice on the 1st of July..
Link (http://www.sa3doc.co.za/modules.php?name=coppermine&file=displayimage&album=10&pos=18) We used the same for our LN2 run plus some added Clingwrap(or Seran wrap)