View Full Version : Prometia compressor not turning on
sandman
05-14-2005, 11:04 AM
Ok, so I have an R507 prometia here, I turn it on and the fans and sensors come on, but the compressor isn't.
I let it run for about 5 minutes, and nothing else happened.
It's R507 with a static charge of about 75psi, and I heard it was undercharged, so I'm recharging it.
Is there some sort of relay or something I need? The molex is plugged into a jumpered PSU, and all of the fans and temp sensors come on, but no compressor.
hmmm you get any error?
was it running anytime?
check cables in the inside - i had a strange prob with my first one because of a metal part shorting 2 cables ^^ transport is always a tortur for a prommi :(
sandman
05-14-2005, 11:54 AM
I checked all the wiring again, and one was lose.
I found out with a nice shock.
chilly1
05-14-2005, 08:21 PM
Well the prommy sounds overcharged at 75 psi static usually the final charge statis is from 50 to 53 .. What is the suction line temp at the compressor running unloaded for 5 min and the suction pressor at teh same time?
Stewie007
05-14-2005, 09:02 PM
I checked all the wiring again, and one was lose.
I found out with a nice shock.
A Shock? You forget to turn it off or unplug it? Not smart..
if checking sth fast btw i never turn off things ^^
and normally nothing happens when checking wires inside a prom so no need for turning off ;)
sandman
05-15-2005, 07:36 AM
A Shock? You forget to turn it off or unplug it? Not smart..
What happened was I touched the caseing, and got a shock when I was testing it out.
sandman
05-15-2005, 07:42 AM
Well the prommy sounds overcharged at 75 psi static usually the final charge statis is from 50 to 53 .. What is the suction line temp at the compressor running unloaded for 5 min and the suction pressor at teh same time?
It was also modified by PC ICe and I'm just recharging it for one of my friends.
It uses a larger 6 row condensor and a different capillary tube. At 75PSI static charge it pulled down to 13hg running unloaded.