Any ram better then GSKILL that is available for DFI NF4/AMD

[Unrealcpu]

anything out there that is comparable with GSKILL LE ram or better to use with the DFI NF4?

[mikead_99]

My OCZ 4200EL's act almost identically to my LA's. 2.5-3-3 into the 290's, 2.5-4-3 for 300+. (Both sets 2x512, both with 1t) The only real difference is my EL's need about .1V more than the GSkill does at any given clock.

[s7e9h3n]

4800ff ;)

[S0nic]

there's also the OCZ PC5000 DFI Special and the VX (if you don't mind heat)

I didn't mention OCZ PC3200 Plat Rev 2 since I'm assuming ur LE can get the same performance if not better..

I love OCZ :D

[Major]

G.Skill LE #1

[VulgarHandle]

what about g.skill LA's?

[RebelsHaven]

My A-Data Vitesta PC4800 DDR600 (http://www.pc-memory-upgrade.co.uk/memory/ddr-ram-pc4800.asp) outclocks my G.Skill "LE" by a little..... Not available in the USA that I know of.....

[YoupY]

Anybody tried OCZ EB's yet on the DFI??

Haven't seen much of them on dfi. They suck on the msi neo2 anyway. But if they are as good as on the s754 platform I believe that memory could even be faster as gskill as long as you don't go above the 300 Mhz.

On my Epox they ran at 292 @ 3.0-2-2-5 @ 3.2V. Would be nice if they do the same on the DFI, but I don't have a DFI to test them on...

[dymONE]

Mushkin Hi.Pref PC4400 ... can run at 310MHz 2.5-4-3-X 1T 2.6-2.8V

[HARDCORECLOCKER]

anything out there that is comparable with GSKILL LE ram or better to use with the DFI NF4?

:D Yes, Corsair 3200LL Platinum v1.1 with BH-5:

http://img173.echo.cx/img173/6120/251889mh.jpg

http://img173.echo.cx/img173/1885/3360temps5ih.jpg

:toast:

[s7e9h3n]

:D Yes, Corsair 3200LL Platinum v1.1 with BH-5:

http://img173.echo.cx/img173/6120/251889mh.jpg

http://img173.echo.cx/img173/1885/3360temps5ih.jpg

:toast:
:slobber: showoff :D :toast:

[Unrealcpu]

:D Yes, Corsair 3200LL Platinum v1.1 with BH-5:


:toast:


How is the ram compared to the LE? DO you get less BSODs? When you say with BH5 does the 3200LL come with TCCD now?

[S&M]

that's a 512mb ... not 1gig ...

[Unrealcpu]

that's a 512mb ... not 1gig ...

right i noticed that also. I think i will stick with 1GB LE :toast:

[[XC] leviathan18]

ocz 4800 platinium is good??? is the only ddr 600 memory rated that i found

[mcnbns]

Anybody tried OCZ EB's yet on the DFI??

Haven't seen much of them on dfi. They suck on the msi neo2 anyway. But if they are as good as on the s754 platform I believe that memory could even be faster as gskill as long as you don't go above the 300 Mhz.

On my Epox they ran at 292 @ 3.0-2-2-5 @ 3.2V. Would be nice if they do the same on the DFI, but I don't have a DFI to test them on...
Yeah, EB seemed to do really well until everyone forgot about it and got TCCD. Is anyone using EB and a DFI nf4 board?

[HARDCORECLOCKER]

How is the ram compared to the LE? DO you get less BSODs? When you say with BH5 does the 3200LL come with TCCD now?

:D Never got BSODs with this setting - I get more stability than with TCCD and to get 25.188 SuperPi it takes somthin' like 336 x 10 at CAS 2,5 1:1 or better max. tweaked with the TCCD....., hard to get for me.

I played with two different kits of TCCD and the BH-5 and for me BH-5 is best so far.

Of course there is no TCCD on 3200LL - only mentioned it because some people do not know the revision numbers, only 3200LL v1.1 is BH-5.

And yes - I always use 2 x 256 MB, better for benching.

:toast:

[charlie]

290-300 fsb, 1:1 at 2-2-2 1GB is coming soon, REAL soon ;)

C

[xgman]

You know something Charlie you want to share?

(judging from you sig, maybe your thinking "Red". lol)

[PicaXuu]

290-300 fsb, 1:1 at 2-2-2 1GB is coming soon, REAL soon

Can you tell us a little more about that please ?

[Unrealcpu]

:D Never got BSODs with this setting - I get more stability than with TCCD and to get 25.188 SuperPi it takes somthin' like 336 x 10 at CAS 2,5 1:1 or better max. tweaked with the TCCD....., hard to get for me.

I played with two different kits of TCCD and the BH-5 and for me BH-5 is best so far.

Of course there is no TCCD on 3200LL - only mentioned it because some people do not know the revision numbers, only 3200LL v1.1 is BH-5.

And yes - I always use 2 x 256 MB, better for benching.

:toast:


Is the current 3200LL out now TCCD or BH5?

[HARDCORECLOCKER]

Is the current 3200LL out now TCCD or BH5?

:confused: Don't know mate - I use the older first edition BH-5 and only the Platinum with the silver HS. After testing about 50 DC kits of all brands with BH-5 I came to the conclusion that this is best ever built.

:toast:

[perry_78]

:confused: Don't know mate - I use the older first edition BH-5 and only the Platinum with the silver HS. After testing about 50 DC kits of all brands with BH-5 I came to the conclusion that this is best ever built.

:toast:

Thats good to know :) I have the same ones, though mine are hibernating so far - only 245 2-2-2 @ 3.2V - And of course they are not the platinum edition :toast:

http://xtremesystems.org/forums/attachment.php?attachmentid=29474&stc=1

Though I am sure 3,8V will spice them up some more :D

[chunkylover77]

Yeah, EB seemed to do really well until everyone forgot about it and got TCCD. Is anyone using EB and a DFI nf4 board?

I am and having nothing but problems. 245 3226 is rock stable. 250 3226 sucks dog balls. I can bench with it but the computer just freezes at random times. Any ideas?

[perry_78]

I am and having nothing but problems. 245 3226 is rock stable. 250 3226 sucks dog balls. I can bench with it but the computer just freezes at random times. Any ideas?

A friend has PC3700 EB and they're doing 270 3-4-4-8 but are blazing hot at even low voltages. Perhaps a fan would do the trick :confused:

Either way it's peculiar, they did better on his other setup.

[chunkylover77]

I've got the Lian Li v2000 case so my ram has a 120mm fan blowing right on it. The ram is very cool to the touch. Just not clocking for me.