PDA

View Full Version : 6200 pci-e vcore mod?

koei
04-22-2005, 09:05 AM
Does anyone know the points to solder to for vcore mod on 6200 pci-e none turnbocache version? I saw the guide with the Asus 6200 but the PCB layout is different.
Cybercat
04-22-2005, 10:00 AM
same boat as you, still waiting on a vmod for my 6600, a there's nothing out there with my PCB.

well, aside from the vddr mod.
persivore
04-22-2005, 10:07 AM
can you post some pictures of the back of the card please.
koei
04-22-2005, 10:26 AM
The layout is identical to the 6200 conrad had.
http://www.xtremesystems.org/forums/attachment.php?attachmentid=25218
http://www.xtremesystems.org/forums/attachment.php?attachmentid=25217
persivore
04-22-2005, 10:30 AM
Can you tell me what is written on the chips I have marked please.
koei
04-22-2005, 02:03 PM
Says this on the middle one

4441M
445303

And lowest says

PMC
25LV512
persivore
04-23-2005, 01:46 AM
What does the top chip say on it (the square one with lots of pins)?
Cybercat
04-23-2005, 12:41 PM
That would be the ISL voltage regulator chip. Pin 29 gives you a resistance of 11.95k on my card. There is a resistor right next to that pin that has the same resistance, and can be used to solder a VR onto. Problem is, no one knows how to find the VCore read point.
Cybercat
04-24-2005, 01:27 PM
bump