The Official San Diego Overclocking Thread

[umbre_tombetoil]

What is max safe voltage for my 3700+ in short benchmarks? 3dmark, superpi etc. I'm on watercooling.

Bah 1.75-1.8v ..... I've put 1.73v on my SD in AC ... so ... but for 24/7 I recommand less than 1.8v .... :nono:

[ionicle]

right...well i'm new:D glad to be here, and my 4000+ overclock is:

AMD Athlon 64 4000+ @ 2700MHz @ 1.5V
OCZ platuinum rev 2 can go to 2-2-2-5 but is @ 2-3-3-6 @ 228MHz
all on the DFI Lanparty UT Nforce 4 Ultra D

cooling: XP-120 with Antec Fan

screenie:

http://upload.sysxtreme.com/0.X/0.6867945/dfh.bmp

thats super PI 32M stable...takes 41 minuits

[STONKA]

Two small updates 3100MHZ 1.47Vcore 3160Mhz 1.56Vcore :)

http://www.forumdeluxx.de/gallery/data/500/71973100-1_47Vcore_.JPG

http://www.forumdeluxx.de/gallery/data/500/71973160-1_56V.JPG

[Jester FPS]

Here's my first oc ever.

AMD 4000+ SD @ 2808.2Mhz stock vcore
XP-90 cooled.

http://img478.imageshack.us/img478/7568/stableocthefirst5ms.th.jpg (http://img478.imageshack.us/my.php?image=stableocthefirst5ms.jpg)

[igor0203]

STONKA which stepping do you have? it looks awesome!

[black rose]

Taking it slow and steady, I don't feel like breaking something that I'm extremely happy with.

Athlon 3700 San Diego @ 2700mhz 1.45v prime+3D stable for 24/7
KAB2E 0533 RPCW watercooled (storm block)
Mushkin UTT @225 2-2-2-5
DFI Ultra-D 702.2 bios (iirc)
PCP&C 510w Deluxe
BFG 7800GTOC @stock (mcw55 cooling) for the time being.

Pics @ http://pg.photos.yahoo.com/ph/wooxy@sbcglobal.net/album?.dir=ae5d&.src=ph&store=&prodid=&.done=http%3a//photos.sbc.yahoo.com/ph//my_photos

[STONKA]

STONKA which stepping do you have? it looks awesome!


0508 EPMW !!

[TinTin]

I got my first 3G too, but it is not stable at that clock :D
Still using stock HSF, voltage burnt the HSF, HOT HOT HOT :banana:

KABYE 0537 APMW
http://img108.imagevenue.com/loc167/th_9e7_3005_small.JPG (http://img108.imagevenue.com/img.php?loc=loc167&image=9e7_3005_small.JPG)

[revenant]

Two small updates 3100MHZ 1.47Vcore 3160Mhz 1.56Vcore :)

http://www.forumdeluxx.de/gallery/data/500/71973100-1_47Vcore_.JPG[/IMG]
http://www.forumdeluxx.de/gallery/data/500/71973160-1_56V.JPG[/IMG]

Whoa!!! nice cpu. what's the stepping?

[mucker]

Just got my Sandy 3700 from ZipZoomFly. It's now stable.

KABCE 0535 XPMW

2.70 GHz (270x10) @ 1.40 x 110% = 1.54v
37C idle/49C load in 78F ambient air
Mushkin crapola TCC5 (2x512) @ DDR491 (9/10) 2.5-3-3-5-1T

Probably would scale better with volts but I am nearly at my limit of 1.55v and 50C. No plans for better cooling either. Overall I am pretty happy with this cpu...

m :)

[steelballzz]

well i got mine 4 days ago
2 nd hand....
0513 mpmw
cabge

here some pics
http://img83.imageshack.us/img83/725/29502k1score8mj.th.jpg (http://img83.imageshack.us/my.php?image=29502k1score8mj.jpg)


http://img389.imageshack.us/img389/4434/285srgs5hq.th.jpg (http://img389.imageshack.us/my.php?image=285srgs5hq.jpg)

http://img326.imageshack.us/img326/500/aquamark29500yc.th.jpg (http://img326.imageshack.us/my.php?image=aquamark29500yc.jpg)

and i know that some of u guys just hate suicide shots..
but this one is just for kicks
http://img326.imageshack.us/img326/3650/suicide3133mhz8of.th.jpg (http://img326.imageshack.us/my.php?image=suicide3133mhz8of.jpg)

:rehab:

[mongo]

first post here, my late lamented 3000 @ 2.7 gave up the ghost the other day......picked this 3700+ as a replacement:
http://img350.imageshack.us/img350/1516/3700kab2e219ghz16hrsstable142v.jpg
BTW this is is on air with a TT Big Typhoon...think I should pick up a Opteron 146?
Forgot to add the cpu stepping KAB2E 0532 XPAW batch#
0886.

[revenant]

yeah - the KAB2E's are little honies. :) mine does 2.8ghz @ 1.4 vcore. lol. mine is KAB2E 0532XPMW... just letting my AS5 set as I installed my DFI mobo yesterday... love this board... voltages are so stable.. whew... good times! I hit 3ghz with this cpu on my MSI mobo @ 1.56 vcore.. but not prime stable as the vcore was all over the map... the neo4 sli is NOT a good mobo for serious OCing... it just does not have good voltage control.. but at stock it's a great peformer. :) I am looking forward to 3ghz stable on this board. yeah!!

[mongo]

Here is a update 2.9 @ 1.40Vcore 21C ambient temp
http://img396.imageshack.us/img396/8691/3700kab2e29ghz14hrsstable140vc.th.jpg (http://img396.imageshack.us/my.php?image=3700kab2e29ghz14hrsstable140vc.jpg)
Local store didn't have any 939 Opterons in stock, and as they were nice enough to refund my purchase price on the dead 3000 towards any cpu. I chose this 3700+ after seeing some of the results posted by yourself ( revenant ) and others....thanks for posting you're results.
Have tried 3Ghz will boot into and run SuperPi 1M @ 1.48
but can't last any longer than 20 minutes running Sp2004,
so am quite content to run 2.9 @ 1.40.

[revenant]

Nice... yeah - glad my info helped. That's why were here, eh? ;)

I am just trying this cpu on my DFI mobo here and am going to try 2.9 on stock vcore now... I was not sure if it would do that. ...and now thanks for your info. :) I think 3ghz required 1.55 set in the bios, so 1.53 reported by cpuz and smart guardian... from what I have seen with this chip... but 2.9 on stock vcore is a thing of beauty. cool and the gang!

[revenant]

I am at 2.86ghz on what I thought was default vcore.. it says 1.45 in the bios, but my mons say 1.408 (cpuz) and 1.4 (SG). hrm... well, it's low vcore and I will take it.

[hornet]

I got a San Diego cabge0516tpaw
SanDiego 3700+ - 2200@2950Mhz 1.65v-core

http://img500.imageshack.us/img500/9119/295htt3ao.th.jpg (http://img500.imageshack.us/my.php?image=295htt3ao.jpg)

[Dobber]

Hey guys, thought I might post my results. CABGE 0518 UPCW 4000+ running at 1.525 vcore 312mhz HTT 9x multi for 2.8ghz. The ram is matched 1:1 at 2.9v with 2.5-4-4-10 for timings.

[M.Beier]

Got mine today, tested in a warm room...

3.05ghz... - 1M stable, didnt had time for mor, I used a vapomicro aircooler... - and got a temp ~ 50-65.. :(

Watercooling will be up this weekend, and thats why I dont post pictures yet :)

used 1.52vcore btw..

Hope to see 3.15 ghz 32M stable on water, and 3333mhz on waterchilling...
My first 1mb L2 cpu btw..

[JasonDTM]

I recently purchased a 37000+ CABGE 0515SPMW cpu from a person on another forum, says on his DFI that it did 2700mhz on SI-120+120mm Denki with 1.4v, I think this cpu is going to be a little sweety on my watercooling. :)

[TinTin]

Some updates, the highest clock in windows, push 1MHz more, shutdown~ :slapass:

http://www.ocqq.com/phpbb/files/3155_small_108.jpg

The highest clock can complete 3Dmark01, 3025MHz, I think still can push a little bit higher,

http://www.ocqq.com/phpbb/files/3d01_35663_small_195.jpg :)

[MyZkO.]

Hi this is first post here at xtremesystems :)
i would like som help from you experts.
read my cpu in sign

i can run my cpu right now 280 * 10 mem ratio 1:1

i have tried to put it up to 300 * 10 ratio 1:1 but wont go stable there.
i have loose timings 3 3 3 8

do you guys have any tips that can make me reach for 300 * 10 or * 9 ?
i have tried a lot of different settings.

can you go 300 on cruical ballistix tracer 1:1 ?
or should i go 300 on cpu fsb and use mem divider for my mem ?

hope you guys can help me out
exuse for bad englist , i am from sweden.

//MyZkO.

[spdycpu]

Anyone ever get a bunk KAB2E? My chip is as follows:
ADA3700DAA5BN / KAB2E 0538BPMW.

The absolute max I can prime out of it is 1.61v actual (1.55v set in bios) at 2.7GHz. This is on a DFI NF4 Ultra-D board (6/23 bios), an Athena power 650 watt PSU, and liquid cooling. CPU never gets above 40C. I lowered my HTT, relaxed the memory timings, tried various combinations of memory dividers, cpu multipliers, fsb, etc. I've tried running 1.45v * 113% which gives me about 1.6v in windows, BUT, when measure it from the surface mount capacitors near the CPU socket it shows 1.655v idle, 1.67v load! That voltage at 2.8GHz was completely unstable as well, failed prime95 instantly. Is there something I am missing? Any suggestions? Any tips would be appreciated, thanks.

[flashnc]

ok..i have to ask...

im going to order a 4000 diego..what should i tell my guy i want? stepping etc.'


thanx yall.....tired of reading lol...my brain hurts.

Flash

[masni]

after waiting a whole month for s939 opteron (never came:banana: ), i bought a 3700+ san diego...:D

board is dfi ultra-d, ram ocz platinum rev2, SD stepping 0544FPMW...:woot:

this are the results on home made watercooling:
2800mhz@1.39V vcore, mem 1:1
<a href="http://imageshack.us"><img src="http://img123.imageshack.us/img123/7969/prime95280014v2sj.jpg" border="0" width="1024" alt="Image Hosted by ImageShack.us" /></a>
3000mhz@1.52V vcore, mem 1:1
<a href="http://imageshack.us"><img src="http://img123.imageshack.us/img123/9725/sp32mb3000mhzddr6001td.jpg" border="0" width="1024" alt="Image Hosted by ImageShack.us" /></a>

i was too lazy to wait for prime95 5+ hours, i have a screenshot after 1 hour of prime 300x10@1.5V, ram 1:1...

and this is a shot on air cooling, my personal record...i didn't have time to tweak for best result, but soon i think i'll go under 27s sp1m...

<a href="http://imageshack.us"><img src="http://img123.imageshack.us/img123/5687/sp1mb3000mhzddr600rekord15xb.jpg" border="0" width="1024" alt="Image Hosted by ImageShack.us" /></a>

[spdycpu]

Anyone ever get a bunk KAB2E? My chip is as follows:
ADA3700DAA5BN / KAB2E 0538BPMW.

The absolute max I can prime out of it is 1.61v actual (1.55v set in bios) at 2.7GHz. This is on a DFI NF4 Ultra-D board (6/23 bios), an Athena power 650 watt PSU, and liquid cooling. CPU never gets above 40C. I lowered my HTT, relaxed the memory timings, tried various combinations of memory dividers, cpu multipliers, fsb, etc. I've tried running 1.45v * 113% which gives me about 1.6v in windows, BUT, when measure it from the surface mount capacitors near the CPU socket it shows 1.655v idle, 1.67v load! That voltage at 2.8GHz was completely unstable as well, failed prime95 instantly. Is there something I am missing? Any suggestions? Any tips would be appreciated, thanks.

Update:

Well, apparently it is my trashy KAB2E. A friend of mine got the EXACT same setup as me, I took pictures of my bios settings and he's using those. Turns out his KAB2E (same stepping, date code, everything) is doing 2.85GHz in a high ambient with the stock HSF where mine only does 2.7GHz with a low ambient on liquid. Do I take the record as having the worse KAB2E so far?? :P

[El Snorro]

Made a mistake with the 2 cpuz windows, the lowest one should be 'memory' tab...
1,47v 3+ghz :)
boxed cooled haha
Cabhe0505Fpmw batch 0052 :banana:

http://img528.imageshack.us/img528/2633/3037147v7na.jpg

[hornet]

SanDiego 3700+ - 2200@2937Mhz - 1.62v-core - 24/7
0516
http://img416.imageshack.us/img416/2246/29373no.th.jpg (http://img416.imageshack.us/my.php?image=29373no.jpg)

[coop]

Nice Snorro, that is running really well. Is that one you recently got? New? From?

[TH€_BR@!N]

System: (siehe sig)
- Mobo = DFI nf4 SLI-DR
- LuKü = Thermaltake Big Typhoon @ 700-900rpm !!!

CPU:
- AMD 3700+ San Diego
- Stepping: 0548BPMW
- CPU with HS
- Temperatures default 36 - load 44c


@ 12h Prime95 Stable 2915Mhz @ 1,37v
http://img434.imageshack.us/img434/3609/12hprime95stable2915mhz137vcor.th.jpg (http://img434.imageshack.us/my.php?image=12hprime95stable2915mhz137vcor.jpg)

@ OCCT Stable 2915Mhz @ 1,37v
http://img434.imageshack.us/img434/4458/occtstable2915mhz137vcore5iq.th.jpg (http://img434.imageshack.us/my.php?image=occtstable2915mhz137vcore5iq.jpg)

@ Super PI Mod 1.4 32M Stable - 2915Mhz @ 1,37v (dont look at the super pi time, i have work on my pc. Only Stable bench!!!
http://img434.imageshack.us/img434/562/superpimod1432mstable2915mhz13.th.jpg (http://img434.imageshack.us/my.php?image=superpimod1432mstable2915mhz13.jpg)

@ 3135Mhz @ 1,50v
- prime come later...
http://img169.imageshack.us/img169/5221/3135mhz15v0qh.th.jpg (http://img169.imageshack.us/my.php?image=3135mhz15v0qh.jpg)

[koSmiQ]

Since this is the San Diego thread maybe someone has any information about this stepping:
KAB3E 0548BPMW

A search turned up nothing so therefore I ask... Any input appreciated. :)

[bladebel]

hi,

i have a 3700+ SD:
ADA3700DAASBN
KAB2E 0538APAW

that does 2850 aircooled primestable

anyone else have a similar stepping ? should I be able to get this much higher? Load temps @ around 41, idle around 31; vcore at about 1.6

will show pics this weekend ...

oh yeah: merry x-mas and a happy newyear !:bday2: :toast2: :toast:

[althes]

hi,

i have a 3700+ SD:
ADA3700DAASBN
KAB2E 0538APAW

that does 2850 aircooled primestable

anyone else have a similar stepping ? should I be able to get this much higher? Load temps @ around 41, idle around 31; vcore at about 1.6

will show pics this weekend ...

oh yeah: merry x-mas and a happy newyear !:bday2: :toast2: :toast:
just got the same one as you testing it now.

[bladebel]

exciting :-) any news yet ? i still hoover around 2830 - 2850, not sure if i should up the voltage even more (now @ aircooling with xp120) to go higher...

[gabb]

Nice, finally a few people with the same stepping, got the 0538 APAW as well and testing it right now :)

[El Snorro]

Nice Snorro, that is running really well. Is that one you recently got? New? From?

It is second hand, the guy i bought it from got it directly from amd :) :cool:

[Wezz]

Hello, my FX 57 is a :

AMD Athlon 64 FX
ADAFX57DAA5BN
CABCE 0516WPMW
1241732E50xxx

How far goes my CABCE 0516 WPMW core 732 ?

[Wezz]

:banana:

[ugp]

Well I got my San Deigo back in and going to see what I can do with it again. Maybe I will go for some high FSB speeds and max out my RAM first. I was getting DDR600 with my OCZ Plat Rev. 2 right before I took it out last time. But I do need some help tweaking these SD Cores for high clock stability.

Does anyone know this Stepping by chance or seen it?

[CABGE 0518UPCW]

[DesertShooter]

I'm getting a new SD this week. Are all SD's KAB3E/KAB2E? They are heavily cold bugged.

[STONKA]

Her is my Old 0508EPMW Batch 2 !! Cooled with Water no IHS !!

http://www.forumdeluxx.de/gallery/data/500/71973220-v156.jpg

[bladebel]

just got the same one as you testing it now.
Nice, finally a few people with the same stepping, got the 0538 APAW as well and testing it right now

nothing yet ?

is it because I is black ?

[DuKe_GR]

3700+ San Diego
KACAE 0547RPBW

http://img297.imageshack.us/img297/4360/32m29150ud.jpg (http://imageshack.us)

http://img69.imageshack.us/img69/7343/prime22zq.th.jpg (http://img69.imageshack.us/my.php?image=prime22zq.jpg)

[saaya]

nothing yet ?

is it because I is black ?

:eh:

[bladebel]

:eh:

it's an Ali G thing :banana:

[uF4No]

hello all!!
I've got a 3700+San Diego CABHE 0525UPMW cooled with XP90 + Papst.
here you have my screens:
this is my 24/7 configuration:
http://img32.imageshack.us/my.php?image=2650primestables16h0li.jpg

And this is tha max MHz I got with 1,5v (this is my first oced processor and i'm a litle scared to give him more volts):

http://img66.imageshack.us/my.php?image=pi1m296578zz.jpg

What do you think about this chip??

PD: sorry for my bad english :confused:

[MrSlacker]

I have KAB2E 0538BPCW that I got back in November. They most i can get out of it is 2.7Ghz. Max HTT is 305. No matter what I do, it wont go higher. Already tried 2 different motherboards. Gonna try to sell it and get something new.

[Crazy Inside]

Hi,

i have a San Diego 3700+ CABGE 0522XPMW

http://img465.imageshack.us/img465/7633/novo14tx.th.jpg (http://img465.imageshack.us/my.php?image=novo14tx.jpg)


My SD 3700+ day-at-day - 1.550V - WC
http://img493.imageshack.us/img493/6792/wal9hj.jpg


My memorys - GEIL ONE TCCD 2x512MB (2.9V) ;)
http://img432.imageshack.us/img432/108/33331tj.jpg

suicide shot
http://valid.x86-secret.com/cache/56858.png


super PI

http://img65.imageshack.us/img65/2629/281ga.th.jpg (http://img65.imageshack.us/my.php?image=281ga.jpg)

My Machinne:
DFI NF4 ULTRA-D
SAN DIEGO 3700+
GEIL ONE TCCD 2x512MB
CONNECT3D X800 GTO (whit 16 pipes)
POWERSTREAM 520W

[coop]

@Crazy Insidehttp://img65.imageshack.us/img65/2629/281ga.th.jpg
3.2v wtf ? It looks like it is reading 2x actual V.

[STONKA]

At now my new SD :) With IHS cooled by Water !

http://www.forumdeluxx.de/gallery/data/500/71973_2-1_4V1.JPG


http://www.forumdeluxx.de/gallery/data/500/71973ghz-1_29V.JPG


Toomorow we broke 3250Mhz :toast:

[Absolute_0]

Once again Stonka, the new SD is fabulous. What's the stepping on this one, is it a recent one?

[Rufus7]

It´s an KAB3E0547GPMW SD 3700.

[SET]

ohhh Sh*ttttt

Very Nice Chip Stonka :O

[ManagHead]

It´s an KAB3E0547GPMW SD 3700.
Is this stonka's stepping? Nice chip!

[Rufus7]

Yes it´s his Stepping and all other good going SD´s.

Hier the Link to the Thread at HWLXX.

http://www.forumdeluxx.de/forum/showthread.php?t=161483&page=73

[STONKA]

3280-1.5 i primed now !


Small Update !! :)

[Absolute_0]

Do you have phase change? That processor would FLY.

[STONKA]

No cooled by Water but the Windoow is Open = 14c Temps !!!

I would See if the Cpu is good to 3.3 GHZ without IHS !!

I have Now 39c at 3280Mhz with 1.5V but without IHS i would by have max 32c at 22C Room Temp !

OH i Think 3330 Mhz without IHS i would make at 22C Romm Temp and 32C max Load :)
http://www.forumdeluxx.de/gallery/data/500/71973280-1_5.jpg

[lucius]

Is there someone with this stepping: KAB2E 0543 FPAW.
For system details see my sig...

This how for i've got :)

http://img391.imageshack.us/img391/9436/415kq.jpg (http://imageshack.us)

[funkflix]

Played a little bit with boring prime.. :p:

http://213.202.211.105/gravedigga/0547gpmw/prime95_3,5h_3155mhz_1.5V_263mhz_BH5.jpg

[coop]

Some great temps on SG while Priming. That is one fine 3700.

[funkflix]

It is without IHS. :)

[Sauron_Vie]

Little update.
I got yesterday another FX57. This one is performing much better than the other. :D


cu

[coop]

@funkflix, it must have helped much, but actually I was noting your chipset and to a lesser degree PWMIC. Very cool.
@Sauron_Vie, damn man, that is fantastic.

[Dynasty]

Here is an KABNE 0544 EPMW I just picked up today.

So far not bad & no signs of any cold bug. :woot:

Could of did 3ghz with even 1.42V.

http://img136.imageshack.us/img136/9923/kabne3ghz8cb.gif (http://imageshack.us)

[qujck]

Does anybody have knowledge about this stepping??

KAB2E 0549 EPEW ??

It does 2805 MHz with 1,392 VCore, but i've got no time to test it further on this weekend.

[funkflix]

@funkflix, it must have helped much, but actually I was noting your chipset and to a lesser degree PWMIC. Very cool.


Ah ok. :)

17-18°C ambient, added a fan over the PWM on this day, temps dropped from around 38-40°C to 28-30°C, NB is watercooled.

[Sauron_Vie]

@coop: thx, mate... i´am still surprised above the vcore :D


cu

[Sauron_Vie]

btw here i have the money shot:

[ManagHead]

I haven't read the thread, but which steppings are better for subzero temps? (single phase change) Are the older ones better than the new ones?

edit: someone tested KAB2E 0547DPHW?

[-Wolverine-]

I haven't read the thread, but which steppings are better for subzero temps? (single phase change) Are the older ones better than the new ones?

edit: someone tested KAB2E 0547DPHW?


well I heard that new stepp's have cold bug so I think that older ones R better but i'm not sure!


BTW here is my 3700+KACAE 0547BPMW cooled by TT BigTyphon
2,8GHz 1/1 1,45v
http://img325.imageshack.us/img325/4181/sd32m312x929mn.th.jpg (http://img325.imageshack.us/my.php?image=sd32m312x929mn.jpg)

this is OK for me but with mem divider it can do 3GHz but with 1,6v (pretty high voltage :( )

[coop]

Got a couple of these today, kab3e 0547gpmw. Just trying out now.
http://img157.imageshack.us/img157/4065/kb332m31381440v5lu.jpg (http://imageshack.us)
http://img487.imageshack.us/img487/6639/kb332m31461456v1dz.th.jpg (http://img487.imageshack.us/my.php?image=kb332m31461456v1dz.jpg)

[Rufus7]

coop is your 0547GPMW an 1377677L50 XXX?
Or an 1377777L50 XXX?

[coop]

Neither, 1377229K50xxx. I will see how well they do here shortly, or at least mine.
http://img105.imageshack.us/img105/2306/kb332m3205155v1wi.jpg (http://imageshack.us)

[funkflix]

Nice CPU! :toast:

[BvK]

indeed..I'm curious with how much vcore prime runs @ 3.0GHz. Could you test that?

[coop]

@funkflix, thanks trying to get some like yours or Stonka's.
@BvK, I will, getting ready to go run atm. From my messing with this yesterday, I think these like to do prime. For use with air or water these are very well suited.

[coop]

Priming now, 3003@1.39v. I'm only going to do a couple hrs. I have more to try out.

[Rufus7]

2-3Hours are enough to show us that the Chip is stable for the first.

[coop]

OK, done. Load temps were 38c-39c. I can post a thumb.
http://img331.imageshack.us/img331/7287/kb33003primeb139v6di.jpg (http://imageshack.us)

[Giasan]

This is mine for the moment:
KAB3E 0547GPMW liquid cooled whit his.



http://img56.imageshack.us/img56/2346/diego31temp3ve.th.jpg (http://img56.imageshack.us/my.php?image=diego31temp3ve.jpg)


http://img81.imageshack.us/img81/6332/diego31009ki.th.jpg (http://img81.imageshack.us/my.php?image=diego31009ki.jpg)

[coop]

This one takes 1.424v for 3Ghz. http://img153.imageshack.us/img153/222/kb32prime30031424v4cd.th.jpg (http://img153.imageshack.us/my.php?image=kb32prime30031424v4cd.jpg) But still will do 32m @ 3063 like other one. http://img80.imageshack.us/img80/3285/kb3232m30631424v9ei.th.jpg (http://img80.imageshack.us/my.php?image=kb3232m30631424v9ei.jpg)

[Absolute_0]

Come on coop, give it some volts

[coop]

I was able to do a 32m@3203 1.55v with this one too. This seems to be not so easy. If someone would like to verify this please do and post. I was using 1.450vx110% to get the resulting 1.55v in Windows. I think it would be a challenge to say the least on air. I am curious though.
http://img143.imageshack.us/img143/8527/kb3232m3203155v3le.jpg (http://imageshack.us)

[coop]

You beat me here b4 I got my post up.

[Absolute_0]

Haha coop, that's pretty good, but CPU idling at 20c? You've got some low ambients! My opty 148 on watercooling and relatively low ambients was idling at 25c with 1.6 volts lol.

[coop]

Well, my res is a Coleman cooler, and sometimes I take gal. milk jugs, that have been filled w/water and frozen, and drop them inside.:D

[Absolute_0]

lol coop

MORE VOLTS! Give it 1.63 and see if you can do more

[cadaveca]

my 148 @ 3ghz idles @ 22c w/ Tt Typhoon. 1.5v

[Absolute_0]

uhh well i guess you have 15c ambient and IHS removed ;)

[coop]

I was looking for something a bit higher but what it is is what it is.
http://img157.imageshack.us/img157/2052/kb3232m3255twk164v5te.jpg (http://imageshack.us)
Thumb shows 1.63v ? http://img157.imageshack.us/img157/2568/kb3232m3255164v9ft.th.jpg (http://img157.imageshack.us/my.php?image=kb3232m3255164v9ft.jpg)

[Absolute_0]

Beautiful coop! I don't think you'll go much further now unless you were to pop IHS.

[cadaveca]

uhh well i guess you have 15c ambient and IHS removed ;)
uhh..no. ihs was removed and then replaced. 17c ambient. not bad tho!;)

[coop]

I put a h2o cooler on my vc and it is in the same loop. It added about 6-8c and makes a little difference. The time is not so good, I'm just glad to have made it through.
Air cooling has come a long ways. When I got mine the best was a slk900? Still using in this box. But the temps have really come down since then.

[Absolute_0]

uhh..no. ihs was removed and then replaced. 17c ambient. not bad tho!;)

I just don't see how you could have a CPU idling 5c above ambient with 1.5 volts on air with the IHS on.
With 1.5 volts and my air cooling i idle about 13c above ambient on my 146.

Here's one of my best idle shots
http://img.photobucket.com/albums/v729/absolute035/overclocking/753e41d3.jpg
That's 23c idle with 1.6 volts, but that's in 16c ambient, with a naked CPU, and my damn good watercooling setup (lapped G4, D5, 120.2 weaponcore). 7c over ambient, even though the volts is .1 more here, i dont see how you can get 5c over ambient with air cooling.

I won't argue though.

[Scrufdog]

ok, so is there a way to tell which of these are the new E6...CFBOX steppings? for the 3700+ i mean

[BvK]

my 0547GPMW 0001 on air

http://i6.photobucket.com/albums/y237/BvK/Superpi32Mop3.jpg

Thought that I also had an 3.25GHz screen with superpi 32M...but can't find it anymore.

[quandasar]

Hi all, i am new to overcloking, but i have managed to get the following results with my san diego and a big typhoon
but i dont get why i get so bad scoring in super pi any ideas what will improve it?

http://img202.imageshack.us/img202/3183/over3ec.jpg

http://img202.imageshack.us/img202/3183/over3ec.jpg

[Sauron_Vie]

So, little update from my side.

Cooled with modded vapo :D maybe i can hit 265HTT 1:1



cu

[coop]

@Sauron Vie, you make that look so easy. You should be able to get 265 with those xms.
@BvK, that is a fine chip. I tried to get a 3100 prime with 1.488v but only 3080. Oh yea, 0001 is pretty cool too.
**EDIT** It looks as though 32m @ 3200 1.55v is not so easy. ***

[Kasparz]

Hi all, i am new to overcloking, but i have managed to get the following results with my san diego and a big typhoon
but i dont get why i get so bad scoring in super pi any ideas what will improve it?
First aware from assrocks, assrocks dont rox.
Second, you must overclock your ram. Even if you got value stick, set 2.5-3-3-6, an up the frequency.
Third, as i see, your SD are running on low voltage, so you can up volts a bit.

[Sauron_Vie]

@Sauron Vie, you make that look so easy. You should be able to get 265 with those xms.
@BvK, that is a fine chip. I tried to get a 3100 prime with 1.488v but only 3080. Oh yea, 0001 is pretty cool too.
**EDIT** It looks as though 32m @ 3200 1.55v is not so easy. ***

Sorry mate, i was too lazy to correct my sig. I did this run with my redlines, because i found out that my FX dont want my old school BH5. dunno why :mad:

btw i broke the 22sec with the redlines.




cu

[KViper19]

i just got a 3700 its a wekk 48 2005 with KAB2E. will this be a decent overclocker. im gonna put it in when i ge my new case ram and HSF

[SHAMENMBC]

Hi guys i am very new to this but heres a list

thermaltake armour case
amd 4000 sd
2gig ocz gold pc4000
abit an8 ultra sli
150 gig raptor
gigabyte liquid cooled
6800 ultra ok i have clocked it and 3048 and it is stable at abot 39 c using abits guru what i want is good timings and volts for this set up and although i have cpu-z i am not sure what they relate too in the cmos as the terms are different if anyone can help please post and/or e-mail me

ALLENDYE1@BLUEYONDER.CO.UK

Thanks

ps how can i put up a pic to prove it

[neoman]

Welcome to XS forum Shamenmbc. You can upload pics using great site called imagehack http://www.imageshack.us/

[KViper19]

i just got a 3700 its a wekk 48 2005 with KAB2E. will this be a decent overclocker. im gonna put it in when i ge my new case ram and HSF
help

[WigSgiW]

Alrighty, got my sucker well stable, I know I can push more voltage through it and get it higher, but on Air at this stage so this'll do for a 24/7 OC:

3700+ San Diego 939

ADA3700DAA5BN
KABYE 0542 FPMW

@ 2805 MHz, 255 FSB x 11

VCORE = 1.525

CPU-Z validation: http://valid.x86-secret.com/show_oc?id=76680

Air cooling with Zalman 9500 - 45 degrees load, 33 degrees idle

Prime95 stable for 27 hours (see screenie)

Memory = 2 x 512 MB 3-3-3-8 2T @ 200MHz - Noname (Jade Star Technologies... heh ;))

Running at 2-2-3-5 1T @ 200 MHz - 166MHz divider (CPU/14)

Memtest86+ Stable for 19 hours.

MoBo = EPoX 9NPA + SLI


Lovely, the numbers on this work out so damn nicely, got LDT multiplier at 4x to give me a 1020 MHz HT - oh god it all just fits into place doesn't it :D

[neoman]

http://img221.imageshack.us/img221/3334/bug1io.th.jpg (http://img221.imageshack.us/my.php?image=bug1io.jpg)

Can anyone say why CPUZ isent showing CPu brand and so on ?

[Phantasia]

You got the same problem as me... Please, try to run AMD64 Tcasemax to see the real core, mine is a Toledo (at least is what the program tells me).

[neoman]

It says Toledo :S So i taught i had San Diego and now i got Toledo instead of it :(

[Phantasia]

Got ourselves a cpu with a 2 cores, 2nd one is disabled, probably based on some Toledo that didn´t pass all tests...

[Blacklash]

I got a san diego 3700+ from the Egg the other day to try in this EPoX 9NPA3 Ultra I have been messing around with:

http://img129.imageshack.us/img129/9894/ocfirst1acrop6kj.png

There is 1.61v on the core. It isn't showing correctly. I put my old crucial ballistix with it so I would be sure to not be limited by my ram. The ballistix is good for 306. I need to tweak and tighten up timings and it looks like a flat 2.9 at 1:1 is going to be it for this chip on air. Not bad for 211usd for the chip and 85usd for the mobo. Also I am on MCE 2005 :p which isn't known to be the most stable OS for overclocking. Full detail of the crop above is below. Click to enlarge.

http://img129.imageshack.us/img129/4152/ocfirst1a3bo.th.png (http://img129.imageshack.us/my.php?image=ocfirst1a3bo.png)

I plan on testing this chip in gaming vs my 4400+.

[HaLDoL]

0549MPMW batch 0042
does 2.85Ghz with stock voltages and 3.1Ghz at 1.5V
aircooled of course
http://img501.imageshack.us/img501/6078/crop1dp.th.jpg (http://img501.imageshack.us/my.php?image=crop1dp.jpg)
next step: remove IHS, use high performance fan and run the RAM 1:1

[Spyrus]

I think for a jump from 2.85->3.1(250MHz) on air you should have more voltage to it about 1.6 in my opinion.
If it is stable at 1.5 (your cpu-z says 1.52 which in my mobo is 1.55 at least)
then it can be stable at 2.95 with 1.4...is it?

[HaLDoL]

Probably, I only tested stock voltage, 1.5V and 1.55V.
And I only want stabililty during benchmarks, ie spuperpi and pifast stable.
I'm not saying that all this is prime stable.

If it scales further like this, we'll see 3.2Ghz @ 1.6V tonight

[Spyrus]

Well i found CCBWE 0544TPMW on a San Diego core.
Seems very strange as this step corresponds to
Opteron Dual Core cpus.
Check this out:
http://wiki.extremeoverclocking.com/wiki/Opteron
Maybe we have some hybrid core? LOL

[Phantasia]

Well i found CCBWE 0544TPMW on a San Diego core.
Seems very strange as this step corresponds to
Opteron Dual Core cpus.
Check this out:
http://wiki.extremeoverclocking.com/wiki/Opteron
Maybe we have some hybrid core? LOL

I have the same as you! Mine corresponds to a Toledo!:D
ADA 3700 DKA5CF
CCBWE 0542VDMW

[Spyrus]

Please post results.
I think it is a bad overclocker.

[Phantasia]

I really don´t know on my 939Dual-Sata2 i can´t get it higher than 235mhz no matter what i do.
But i really think that this is related to the motherboard as if i get past the 235mhz, the computer won´t boot. Until i try it on another motherboard, i can´t tell if it´s a bad overclocker or not.:mad:

[Spyrus]

Well it seems that it is a Toledo but with second core disabled.
If you can find a way to enable it then you have a nice dual core cpu.
But i think that fact make the chip a descent overclocker.
What temps do you have?

[Phantasia]

Finding a way of unlocking the 2nd core would be sweet! As i´ve bought this cpu for 215€!
Now for the temps i got with my XP-90 and a NB SE2, NextSensor reports 47º now at full load, and it´s kinda hot today.

I think that this is a rather high temperature for a San Diego, don´t you think?

[neoman]

Phantasia: With what clocks and voltage u hit 47*C at full load ?
I run Prime95 @ 2650mhz 1.6v and hit 50*C

[Phantasia]

I´m usually folding 24/7, at stock voltage (1.45) and at stock speed(2200) since i can´t get a decend overclock from this motherboard. Right it´s around 27º outside. And i have all intake fans off.
This is weird, now i´m sure that this is a weird temp for a San Diego...

[x3ro]

I tested my Sandy 3700+ for a bit today. The only bad part about this cpu is the ****ty IMC. It cant and wont handle 290+ 1:1...

But I finished 300*10 @ 1.48V with a devider tho.

I used the following rig:

AMD San Diego 3700+ KAB2E 0546 GPBW
DFI nf4 Ultra-D Modded to Sli
704-2BTA Bios
2x512Mb GeIL TCCD Week 525
Sapphire X800GT
Zalman 400W PSU

http://img78.imageshack.us/img78/8510/3ghz148v9vn.jpg

Ill try with bh-5(max 275ish @ 2-2-2-5)next week.

Regards

[neoman]

X3RO is it 3d and gamestable at those speed ?

[revenant]

^^ what he said... but nice looking chip! mine will do 3ghz with 1.475 vcore, but I can't prime with that voltage... then anything over 1.50 would cause too much heat, so I popped the top and that did the trick.. hopefully you won't have to go through that with yours... the new ones seem to be better with vcore it seems... as the fabrication process optimzes.. they get better yeilds of good chips which need less power.. the KAB3E's were good OCers also.. well, a bunch of them... anyways... post more info on your OCing when you can. :)

[Spyrus]

Well my SanDiego does 10x300 but cannot do 11x256 or more.
What is this issue?
Is something with multi 11?
My BH can do 10x265 1:1 with ease but 11x256+ is not capable for my San Diego.
Played with MAL/Read Pr but no go. Is this crappy imc?

[x3ro]

X3RO is it 3d and gamestable at those speed ?

No at 1.49/1.50v it is tho..

But im not interested in stability, im interested in ocing!

Most important for me:
Super Pi 1M
3d mark 2k1
3d mark 2k5

Regards

[n0!z3]

Hello!!!

4000+ kabye 0541GPMW?
This steping is nice!???
Help me!!!

Bye!!!

[neoman]

Sounds nice to me. 2.9ghz with air shouldnt be problem :)

[before]

Not bad for 11°C :p:

http://valid.x86-secret.com/show_oc?id=79603

http://www.beforeoverclock.com/images/cpu-3517.jpg

[Hystrix^]

Hey all, here's my sandy 4000+ (KABYE 0538 GPMW)

Pic: 28.781 (http://photobucket.com/albums/f260/hysttrix/Overclocking/?action=view&current=4000SD28.jpg)

I'm going to test it next weekend on water. What do you gays think of this stepping.
Btw, how do you set your pic immediately on this page?

Grtz

[coop]

@Hystrix^, save your pic, upload to imageshak then click on the insert image icon. I got a SD3700+. kab3e 0547gpmw. I got a new board also. 32m@3203mhz with 1.53v, and 32m@3263mhz with 1.6v. Did not concern myself with times, only to complete at lowest possible volts.
http://img.photobucket.com/albums/v155/jcraig/sd370032m320322.jpg
http://img.photobucket.com/albums/v155/jcraig/sd370032m326322.jpg

[neoman]

god damn coop :P what cooling are you using ? I presume watercooling

[Hystrix^]

Thanks for the information

[coop]

Yes, water with a rather large res. that I can put ice into.

[All_Star]

How are the latest 3700+ SD's? Any good? I'm selling my X2 that does 2900mhz @ air cooling, and I'm about to buy a 3700+ SD but don't know how the new steppings are doing . . .

[Spyrus]

Best so far...my XP-120 can hold this to go higher.
What should i expect on water?

[DrJay]

What do you gays think of this stepping.


:ROTF:

[neoman]

:P comon he prolly ment guys .

[DrJay]

What he meant was obvious. Makes it no less funny (actually, maybe a wee bit more).

[starostise]

Yes, water with a rather large res. that I can put ice into.

that's all it can do with this temp?
what is the batch number please?

[coop]

that's all it can do with this temp?
what is the batch number please?
eh-ehmm, no, but that is about it with those volts.:clap: Batch 1377229K
I'm trying to understand how the drive strengths can be used to get better performance.

[coop]

Playing around. If I could keep temp lower during calculations, this would do pretty good.
http://img.photobucket.com/albums/v155/jcraig/SuperPi/1m33716-1slower.jpg

[cpnmnch]

http://valid.x86-secret.com/show_oc?id=80084

- 1/3/06
- 1.55V
- Stock
- 34/50
- Prim95 stable

[starostise]

aircooled freezer 64 pro, 1.6v room temp about 22-23°

http://membres.lycos.fr/starostise/KAB3E0547GPMW/temp_idle_3367MHz_air_1.6v.JPG

http://membres.lycos.fr/starostise/KAB3E0547GPMW/maxscreen_air_cpu-3367.PNG

valid corrupt at 3367MHz
http://valid.x86-secret.com/show_oc?id=81844

[coop]

I see you mix and match your mems too. Very nice, esp. for air.

[starostise]

I see you mix and match your mems too. Very nice, esp. for air.

yep, this kit makes 285 1.5-2-2-0 at spi 1m with 3.75v
i think my cpu is awesome regarding temp and voltage :eek:

[starostise]

cpu at nearly 20°C (dod on, then off to increase temp)

http://membres.lycos.fr/starostise/KAB3E0547GPMW/dod_20C_cpu-3521.PNG

[CompGeek]

How is a 3700+ 0550XPMW? I had to put one in a CAD machine at work today... made me cry that it wasnt going to be OCed :(... well, jk, im not quite that much of a nerd, but I was just DYING to know how it'd do.

[coop]

@starostise, "i think my cpu is awesome regarding temp and voltage". It is, that's fantastic.
@CompGeek, that would be tough. Maybe you could offer to pre-test them.

[starostise]

little better :)
cpu @ +17°C

http://membres.lycos.fr/starostise/KAB3E0547GPMW/dod_17C_cpu-3588.PNG

http://valid.x86-secret.com/show_oc?id=84404

[neoman]

Is this suicide shot or Super PI 1m stabel ?

[starostise]

suicide shot.

[Hirogen]

hi,

i need some help with san diego 3700 overclocking.

first my config:

- san diego 3700+ on aircooling

- dfi nf 4 ultra d

- 2x512mb twinmos bh-5 old (doing ~265mhz@3,3v and ~272mhz@3,53v)

- msi 6600gt pcie

- lc power 550w powersupply (20-pin)

i have 2 destinations, >3000mhz on cpu and >260mhz@2,0 2 2 x on my rams

so i am trying following settings, they are 4 to 5 h prime and super pi 32m stable:

11x313mhz @1,48-1,5vcore with 166 divider -> 260mhz on rams


so far, everything is ok, but when i startet looping the first 3 tests of mad onion 3dmark 2001 , the system crashes between 1 to 5 minutes.

(i never tried higher versions, perhaps i should ...)

it seems 3d/pcie load crashes my system.

i think, my temp's seems to be okay, 40-42° C load on cpu, 42-44°C load on chip? the volts of my powersupply seems to be okay, too.

i am playing with open case, extra cooling on ram, northbridge, graphic card, and so on to locate the problem, but nothing.

i am playing with different bios versions and spent a lot of time on optimizing all the memorytimings, rising ltd and chip volts .1v but there is no satisfying result.


so i need help and suggestions, especially from people with the same settings or from people with same problems.

by the way, are there pcie settings in the bios , which relieve or stabilize my system?

sorry for my horrible english, i am from germany and i know i have to improve it ;-)

(when i am in the false section, please let me know.)


H.

[Silverdoc]

just started to OC it last nite and this is what I've gotten so far. Will have 3.0 and 30000 by this week end.

http://i20.photobucket.com/albums/b223/silverdoc/th_5845c412.png (http://i20.photobucket.com/albums/b223/silverdoc/5845c412.png)
http://i20.photobucket.com/albums/b223/silverdoc/th_29476-2.png (http://i20.photobucket.com/albums/b223/silverdoc/29476-2.png)
http://i20.photobucket.com/albums/b223/silverdoc/th_000_0368.jpg (http://i20.photobucket.com/albums/b223/silverdoc/000_0368.jpg)
http://i20.photobucket.com/albums/b223/silverdoc/th_000_0386.jpg (http://i20.photobucket.com/albums/b223/silverdoc/000_0386.jpg)
http://i20.photobucket.com/albums/b223/silverdoc/th_000_0374.jpg (http://i20.photobucket.com/albums/b223/silverdoc/000_0374.jpg)
http://i20.photobucket.com/albums/b223/silverdoc/th_000_0377.jpg (http://i20.photobucket.com/albums/b223/silverdoc/000_0377.jpg)

[before]

little better :)
cpu @ +17°C

http://membres.lycos.fr/starostise/KAB3E0547GPMW/dod_17C_cpu-3588.PNG

http://valid.x86-secret.com/show_oc?id=84404

Nicely done my freind :toast:

[funkflix]

Nice one! Any benches? :)

[lopri]

If I buy either an A64 3700+ or an Opteron 146 today, which one will have a better chance to hit 3GHz on air? (under ~1.60V, preferrably under 1.55V)

[funkflix]

3700+.

[starostise]

Nice one! Any benches? :)

nope.
mem controler is semi-dead due to a bad insulation, so i do not have dual channel and 1T mode any more :(

[coop]

3700+. After a couple hours of attempts, I was able to finally run this by changing the drive strength to a combination it liked. http://img449.imageshack.us/img449/8421/pms5hr6rn.th.jpg (http://img449.imageshack.us/my.php?image=pms5hr6rn.jpg)
http://img458.imageshack.us/img458/8025/pms4hr0jq.th.jpg (http://img458.imageshack.us/my.php?image=pms4hr0jq.jpg)

[All_Star]

3700+. After a couple hours of attempts, I was able to finally run this by changing the drive strength to a combination it liked. http://img449.imageshack.us/img449/8421/pms5hr6rn.th.jpg (http://img449.imageshack.us/my.php?image=pms5hr6rn.jpg)
http://img458.imageshack.us/img458/8025/pms4hr0jq.th.jpg (http://img458.imageshack.us/my.php?image=pms4hr0jq.jpg)

Now test again with large FFT's and priority @ 10 ;)

[Bavilo]

Heya,

I own a 3700+ 2.2ghz sandy. I have successfully overclocked it to 2.7ghz on stock cooling and heatsink. It passed a 16 hour prime blend test. So i guess its pretty stable :) Just one problem. Under full load such as prime. the temps can go as high as up to 50+*C. Probably because im using stock heatsink. Is there any heatsink and fan you would recommend to get this baby running cool again? Please let me know which heatsink will be good to pick up.

Thanks
Mike

[steelballzz]

hi
ninja and noiseblocker SX2

keeps my opty at 40ºc 1,52v full load

a bit expensive but a great cooler....

[coop]

"Now test again with large FFT's and priority @ 10 "
Sheeet my friend, my ram is bulletproof. :slobber: Tried, tested, and proven many times.;)
I am fortunate to have the 2 set I do and to have never sold them.

[All_Star]

"Now test again with large FFT's and priority @ 10 "
Sheeet my friend, my ram is bulletproof. :slobber: Tried, tested, and proven many times.;)
I am fortunate to have the 2 set I do and to have never sold them.

Ok, but using small fft's stresses your CPU less then using large. Just run the "real" Prime95 and choose maximum heat.

[Hystrix^]

A few days ago I've tested my sandy 4000+ the first time with a mach2. The cpu was about -20. But the result was there
http://i49.photobucket.com/albums/f260/hysttrix/Overclocking/M225.jpg

SS was about 3.6GHz

This is my stepping:
ADA4000DAA5BN
KABYE 0538GPMW
1334407150474

[starostise]

screen @ 3604MHz for 4°C

http://membres.lycos.fr/starostise/KAB3E0547GPMW/cpu-3604-dod-4C.PNG

valid: http://valid.x86-secret.com/show_oc?id=87641

it screens @ 3590 for 17°C too so between 4° and 17° it could do better certainly :D

[Markmk]

hello guys, ive just recieved my new cpu Athlon 3700+ ccbwe 0549 upmw stepping. been running prime for the last few hours to burn it in. just wondering what sort of overclocks u have got with my stepping

[starostise]

cpu @ +12°C idle

http://membres.lycos.fr/starostise/KAB3E0547GPMW/cpu-3638-dod-12C.PNG

http://valid.x86-secret.com/show_oc?id=90342

coldbug @ +11°C for 330 HTT

[KingDingeling]

time to get my results in here-->
3100MHz suicide
http://img89.imageshack.us/img89/3563/3100mhz9qs.jpg

3008 SuperPI32M stable
http://img164.imageshack.us/img164/9823/superpi32m3008mhz4pq.jpg

Thats all I have here, but thats because my rig is in germany whereas I am in the US.
I think it could go higher, but it was limited by my mobo and cooling, before it was on the eVGA 133-K8-NF-41-AX board (not too bad actually) and a Freezer64 non-pro, but now with the DFI and the SI-120, I am hoping around 3GHz stable! Now if my mem would go it :stick:

[Mardok]

CPU : San Diego 3080MHz @ 1.440V
WC : PowerX + Eheim 1250 + Black Ice eXtrem
Stepping : I don't know, buy without IHS ;)

http://mardok.ovh.org/screen/sp2k4/SP2k4_2h_SD_10x308_1.440v.png

[vcas5]

3700+ kacae 0605 apgw

i can bench @3g post @3.1 but i can only get 2.9prime stable i had it running max heat for 14 hours till we had a power cut;)

[n0!z3]

Hello,

Can anyone help me, i have a 4000+ (KABYE 0541GPMW ).

My PC,
Asus A8N32SLI
Gskill HZ PC4000
Enermax Liberty 620W

Help me...

[1_Ghz_Guy]

From everything I've read in this thread, it is entirely possible to O/C my A64 4000+ to 3 Ghz? I'm hoping to go 10 x 250 with a 4/5 mem divider. Does that sound reasonable?

[starostise]

possible but it depends of your cpu :)

[1_Ghz_Guy]

How so? I honestly haven't overclocked since my P3 1Ghz.

[Der1k]

KAB2E 0604 MPMW

http://img.photobucket.com/albums/v507/RickRude/laff.jpg


14hours+ prime
spi 1m 29s

idle 38 \ peak prime temp 58 \ peak gaming temp 50

[Der1k]

KAB2E 0604 MPMW

http://img.photobucket.com/albums/v507/RickRude/laff.jpg


14hours+ prime
spi 1m 29s

idle 38 \ peak prime temp 58 \ peak gaming temp 50

[rustynator]

Here is my new CPU....an AMD 3700 KACAE 0602GPMW. I think this stepping is on a par with the legendary 0547GPMW. My highest stable overclock on stock volts (on air) is 3080MHz, and with 1.44V I can reach 3135MHz. The latter is only 1 hour 25 minutes prime stable but I am working on that:

3070MHz at 1.392V:

http://i20.photobucket.com/albums/b236/rustynator/0602/0602Prime2Hat3070MHz.jpg

3135MHz at 1.44V (check out the great idle temps...NOT):

http://i20.photobucket.com/albums/b236/rustynator/0602/0602Primeat3.jpg

[starostise]

under my single phase:
-19°C idle
0°C load

3205MHz at stock vcore :)
click to enlarge

http://membres.lycos.fr/starostise/KAB3E0547GPMW/prime95_3200_1.36vmin.JPG (http://membres.lycos.fr/starostise/KAB3E0547GPMW/prime95_3200_1.36v.jpg)

[Zorro]

cab2e
1,5V<
Air: Thermaltake Big Typhoon
About 35Celsius on idle and around <50Celsius on load
System's in the sig.

Prime likes to run forever on 3050MHz
Haven't tried superpi at all on this processor.
Here's my results for CPU-mark 2.0 and 2.1 :
2.0 (http://img122.imageshack.us/img122/6574/cmark7mx.jpg)
2.1 (http://img416.imageshack.us/img416/7144/cpumark2127yc.jpg)


Here's (http://img122.imageshack.us/img122/9384/tm2js.jpg) a prime-screenshot with my old 3700+ san diego cab2e-processor:

[JME F1delity]

http://img461.imageshack.us/img461/2219/myoc2ow.jpg

Crappy overclocking chip :(

[gianni-gt]

and here my results with my naked sandy (watercooled):

ADA3700DAA5BN
KACAE 0602GPMW
1400929A60416

Prime @ 3120Mhz 1.504V:

http://bastel-gianni.ripping.org/overclocking/prime_sd3700_0602gpmw2_3120.jpg


SuperPi @ 3160Mhz 1.568V - 26.047s

http://bastel-gianni.ripping.org/overclocking/superpi_26.047.jpg


CPU-Z @ 3419Mhz 1.664V

http://valid.x86-secret.com/show_oc.php?id=97699

[Suffocation]

anybody knows what i cant expect from a KAB2E 0604FPFW ? I have it here, but cant test it right now.

edit: well it sucks big time.

[generalkido28]

hey guys anyone here knows anything about this stepping ?
ada4000daa5bn
kacae0544epaw

is this a good overclocker ?? i just saw one i for about $300 i needed to know if its worth it ?

[Celcius]

hey guys anyone here knows anything about this stepping ?
ada4000daa5bn
kacae0544epaw

is this a good overclocker ?? i just saw one i for about $300 i needed to know if its worth it ?
Those kacae chips seem to be good 'clockers from what I've seen.

[yaddam205]

Talking about all this stepping does anyone know what the VERY last ones were? When they stopped production on the 28th of last month?

[starostise]

KACAE 0607 APMW

2.8GHz on stock volts prime stable

max screen air (+38°C idle)

http://membres.lycos.fr/starostise/KACAE0607APMW/cpu-3180.PNG

max htt air (+38°C idle)

http://membres.lycos.fr/starostise/KACAE0607APMW/cpu-2569.PNG

[gianni-gt]

my cpu with dryice: AMD64 SD3700+ 0602GPMW - 3667.31 MHz@1.84V (http://valid.x86-secret.com/show_oc.php?id=107106)

:banana:

3rd in the cpu-z 3700+ hall-of-fame...

http://octs.ripping.org/dryicesession1/sandy3700_top10.jpg


the hole story (with pictures) (http://www.overclocking-team-switzerland.com/thread.php?threadid=394)

http://octs.ripping.org/dryicesession1/gt-verified.jpg

[Celcius]

http://xs204.xs.to/xs204/06304/3700.JPG.xs.jpg (http://xs.to/xs.php?h=xs204&d=06304&f=3700.JPG)

This cpu is capable of more...I need better cooling (still on hyper6). According to the bios, my idle temp was 46C :lol: . Also, the vcore was a hair over 1.7v, so cpu-z is inaccurate lol.

edit: LOL, I forgot to set the ldt to 3x instead of 4x :slap:

[NajZ]

I got this recent stepping 3700. Its an E6 core. (maybe i shuldn't be posting here - almost a san diego:) )

LCBIE 0623FPMW ;)

http://www.z.asghar.dsl.pipex.com/LCBIE.JPG

i havent tested for max yet, need to pop the IHS first. Using XP-90C, load temps are poor 50+. Maybe coz my fan is almost not rotating :D

[yaddam205]

Just started to test my secondarys 3700+

and so far all I can is "shibby" :woot:

I am at the same temps at stock speeds as I am now at 2.5GHz

http://img207.imageshack.us/img207/6278/sdfsdf3234wy4.png

shibby...

[zipp0r]

http://img226.imageshack.us/img226/9369/3180yi6.jpg

oem 4000+ SD
KAB1E

1.475v i think! on a freezer 64 50c load

[gianni-gt]

my next SanDiego 3700+

http://octs.ripping.org/cpuz3559.JPG
http://valid.x86-secret.com/show_oc.php?id=129861

http://octs.ripping.org/3700_top10_181006.JPG

the superpi result:
http://bastel-gianni.ripping.org/overclocking/superpi_25.125.jpg


prime:

http://bastel-gianni.ripping.org/overclocking/prime_sd3700_0547gpmw_3303.jpg

50% OC primestable :banana:

[cdawall]

im looking at getting an fx-55 sanddy for $200 any good? i know its not as a good of a deal as a 4000+ do the fx clock higher? im not a noob so i know the fx has an adj multi etc but im going to use the stock hsf ( i know its not the greatest idea but it worked on my s754 3000 i hit 2.5ghz)

[PlanetDynamic]

my new San Diego 4000+ (0656FPMW I think)

http://img227.imageshack.us/img227/6544/fpmwprime1568v3204mhz37gr8.jpg

Cooled with a normal watercooling.
Super-PI Stable 3327MHz

The Wold record is my ;)

[Kasparz]

my new San Diego 4000+ (0656FPMW I think)
You have time machine?
Just got my new 3700+ sandy 0542FPMW, spi32m stable at 3Ghz, 1.6v and 58c load :| Must pop off IHS, and this chip will fly.

[Kasparz]

Removed IHS for my new sandy. But OMFG, wtf this IHS have letters (A and H)and AMD logo on it. What does it stand for? Technically same 3700+ E4 sandiegos, but different IHS. Dropped temps by 10c.

[roadie]

I have the following 3700+ on the way:

KAB2E 0551DPAW
Batch number 0617

This (http://forum.rue-montgallet.com/ruemontgallet/OverclockingTuningSilence/BDD-Athlons-FX-X2-Semprons-Opterons-1XX-socket-sujet-26416-6.htm#t75347)is the only result Google has found for it, but at those volts the speed looks good.

[Littleluk]

AMD 4000+ San Diego, 1,625 Vcore @ Water @ 50 °C
Cant get it Prime Stable at 3.0 Ghz, 2.9 is stable with 1.6v.

More Vcore?

http://valid.x86-secret.com/cache/148096.png

http://valid.x86-secret.com/show_oc?id=148096

[Littleluk]

1.675 vCore @ 3.12 Ghz AMD 4000+ on water

http://img119.imageshack.us/img119/8141/cpu3120rq7.jpg

[hailscott]

okay here is my oc ON AIR @ 1.47 volts
http://valid.x86-secret.com/show_oc.php?id=148477

ADA3700DAA5BN
KAC2E 0547DCPW

[docah]

Newegg was running a special on 4000+ san diego chips with biostar t-force 6100 boards. My dfi lanparty nf4 died, so i picked a combo up.

Does 3.0ghz on 1.45v under an old xp120 ? cooler. Only primestable for 1 hour though.

[HousERaT]

Newegg was running a special on 4000+ san diego chips with biostar t-force 6100 boards. My dfi lanparty nf4 died, so i picked a combo up.

Does 3.0ghz on 1.45v under an old xp120 ? cooler. Only primestable for 1 hour though.
Nice clocks you got there. I've got two being delivered today from the Jersey Warehouse. What stepping is that chip?

[MrSeanKon]

1.675 vCore @ 3.12 Ghz AMD 4000+ on water
1.675 Volts are not recommended what's the temperature at full load? :rolleyes:
The o/c exponent n for your CPU is out of limits here are more info (http://www.xtremesystems.org/forums/showthread.php?t=116858)
Cos the photos are not the stable frequencies....
Correct me if I am wrong....

[Turrican]

my max. on my 3700+ is 303.5x11=3338Mhz

KACAE 0552FPDW

http://img227.imageshack.us/img227/6479/3035x111zu13438sz4.th.jpg (http://img227.imageshack.us/my.php?image=3035x111zu13438sz4.jpg)

insane volts, because of coldbug :slapass:

with 2nd IHS/Ricky Tweak i got the Temp higher, so i use now 1.79V max.

damn coldbug :slapass:


max. cpu-z so far

3418Mhz @ 1.79V
http://valid.x86-secret.com/show_oc?id=152450

[funkflix]

Bought me a 3700+ just for fun and tried to beat my old best 1M result and i got it! :)

http://www.gravedigga.de/gravedigga/0630cpmw/24.282s.jpg

It's just on air.

[perry_78]

These new chips are clocking the hell out of the old ones.. I'm going to have to try very hard to get above 3.3g on dice with min.. and thats a cabge 0516 tpaw.

[MARyo]

Bought me a 3700+ just for fun and tried to beat my old best 1M result and i got it! :)

http://www.gravedigga.de/gravedigga/0630cpmw/24.282s.jpg

It's just on air.

vry nice cpu ! especially that on air ...

[coolasus]

Prime Stable 24h @ Standard Vcore 1,4v @ Standard Boxed Cooler :)

2400 @ 2664
1.4v @ 1.4v
Bus Speed: 200 @ 222

http://img152.imageshack.us/img152/4521/screenwc0.th.jpg (http://img152.imageshack.us/my.php?image=screenwc0.jpg)

[nano]

funkflix what stepping is that?
coolasus i can do the same boxcooler, at 1.35Vcore :D

[coolasus]

i thought only the new Athlon 4000 - E6 Stepping Model - Toledo was able to run at 1.35v?
can the E4 Stepping Model also run at 1.35v with a 10 % Overclocking??

By the way..as i am a noob in this: Can it be dangerous for the health of the CPU to run it at a too LOW voltage?? Or just system crash?

[funkflix]

funkflix what stepping is that?

It is a 0630CPMW. :)

Some other results:

1st is my 24/7 setting -
http://www.gravedigga.de/gravedigga/0630CPMW/8hprime_3003mhz_1.37V_Luk%c3%bc.jpg

Some prime with colder ambient -
http://666kb.com/i/akk1v0wirccx9gt5p.jpg

[Mul]

Not sure if anyones particularly interested, but this is my 3700+ SanDiego. It's an older 05 stepping, and bought in second hand in August.

CPU: AMD Athlon 64 3700+ E4
Code: ADA3700DAABN
Stepping: KAB2E 0532 XPMW

1M Screenshot of 255*11 1.35V set in BIOS.
http://img295.imageshack.us/img295/7546/3700w00tts1.th.jpg (http://img295.imageshack.us/my.php?image=3700w00tts1.jpg)

It's 32M stable at that voltage but needs 1.375V set in BIOS for it to be totally stable. Temperatures aren't too great though. Might invest in a Freezer 64 Pro or better at some point. Been swapping between stock cooler and Akasa Evo 120. Temperatures with the two are about the same.

Mul

[funkflix]

By the way..as i am a noob in this: Can it be dangerous for the health of the CPU to run it at a too LOW voltage?? Or just system crash?

Can just result in instability. :)

[Lastviking]

Bought me a 3700+ just for fun and tried to beat my old best 1M result and i got it! :)

http://www.gravedigga.de/gravedigga/0630cpmw/24.282s.jpg

It's just on air.


Thats not normal air temp :stick:

[funkflix]

Did i wrote something like that? :stick:

See first prime-screen for normal ambients.

[amwhitey]

This is my best Super PI time on air cooling.
http://i45.photobucket.com/albums/f90/amwhitey/superpi272.jpg


This is what I run normally and highest temp is 39C.
http://i45.photobucket.com/albums/f90/amwhitey/10.jpg

[cpulloverclock]

AMD Athlon 64 4000+ KAB1E 0631GPMW

I dont know if it's an A64 WR on air cooling...


http://valid.x86-secret.com/show_oc?id=159896

http://img261.imageshack.us/img261/305/36053cw.jpg
http://img347.imageshack.us/img347/5010/361471ir.jpg
http://img228.imageshack.us/img228/6156/33139lg.jpg

[GhostMaster]

AMD 3700+ San Diego LCBIE 0626 BPMW its any good for OC?

Its a E4 or E6?

LCBIE its toledo core?

[cpulloverclock]

AMD 3700+ San Diego LCBIE 0626 BPMW its any good for OC?

Its a E4 or E6?

LCBIE its toledo core?
http://www.cpu-world.com/info/AMD/K8_stepping_codes.html

So Toledo...

[GhostMaster]

http://www.cpu-world.com/info/AMD/K8_stepping_codes.html

So Toledo...


thanks, toledo looks good for OC next week i will test it with a dfi SLI-D, g.skill HZ PC4000 and a LC Power 550w Green 14cm fan.:D

[funkflix]

Expect something around 2900-3050MHz with 1,4-1,6V. ;)

This was my one, with air:

http://666kb.com/i/akbga5ndf4p5lnh1p.jpg

[cpulloverclock]

Update on WC :

http://valid.x86-secret.com/show_oc?id=160532
http://www.image-dream.com/membre/up/anonym/735b5803caac4448a876665e00f6d200.jpg

[MARyo]

[QUOTE=cpulloverclock]Update on WC :

IMG [QUOTE]

omg , your cpu own... just grudge that..:rolleyes:

[paulxmn]

Cooling: CPU Thermalright 120 NB Thermalright HR-05
Geil 2GB DDR400 PC3200 Value Ram

http://i44.photobucket.com/albums/f18/paulxmn/DFI%20Expert/StressPrime2800.jpg

3D Mark SE (http://i44.photobucket.com/albums/f18/paulxmn/DFI%20Expert/3DMarkse2800.jpg)

Future Mark 03 (http://i44.photobucket.com/albums/f18/paulxmn/DFI%20Expert/FM0311x255.jpg)
Future Mark 06 (http://i44.photobucket.com/albums/f18/paulxmn/DFI%20Expert/FutureMark062800.jpg)

[paulxmn]

CPU Cooling: Thermalright 120mm NB Thermalright HR-05
2GB Crucial Ballistix LED

http://i44.photobucket.com/albums/f18/paulxmn/StressPrime2827CR.jpg

3D Mark SE (http://i44.photobucket.com/albums/f18/paulxmn/3DMark012827.jpg)
3D Mark 03 (http://i44.photobucket.com/albums/f18/paulxmn/3Dmark032827.jpg)
3D Mark 06 (http://i44.photobucket.com/albums/f18/paulxmn/3DMark062827.jpg)
CPUZ (http://i44.photobucket.com/albums/f18/paulxmn/CPUZ2827.jpg)

[paulxmn]

CPU Cooling: Zalman 7700-Cu LED NB Evercool
1GB OCZ Gold 2x512

http://i44.photobucket.com/albums/f18/paulxmn/DFI%20Ultra%20D/StressPrimeocz11x254.jpg
3D Mark SE (http://i44.photobucket.com/albums/f18/paulxmn/DFI%20Ultra%20D/FutureMark01.jpg)
Future Mark 03 (http://i44.photobucket.com/albums/f18/paulxmn/DFI%20Ultra%20D/FutureMark03.jpg)
Future Mark 06 (http://i44.photobucket.com/albums/f18/paulxmn/DFI%20Ultra%20D/FutureMark06.jpg)
Aquamark (http://i44.photobucket.com/albums/f18/paulxmn/DFI%20Ultra%20D/Aquamarkocz254x11.jpg)

[i found nemo]

Just started to test my secondarys 3700+

and so far all I can is "shibby" :woot:

I am at the same temps at stock speeds as I am now at 2.5GHz

http://img207.imageshack.us/img207/6278/sdfsdf3234wy4.png

shibby...


maybe ur chip likes volts? 1.648 max

[Poser]

See the sig yo'
Zalman 9500led (modded with MF92)
http://img126.imageshack.us/img126/7268/currentbh0.th.jpg (http://img126.imageshack.us/my.php?image=currentbh0.jpg)

[MaRtH]

My little Sandy, as reported in my signature...


LINK (http://img19.imageshack.us/my.php?image=sdailyxtremesystemsqr5.jpg)

Bye:)

[m_enanos]

Hi, im new on this forums.
Im going to buy an used SD 3700+ and i have some steps to choose
Here is the CPU stepping code ->>>
ADA3700DAA5BN:

KACAE 0551TPAW / CABGE 0517UPAW / KAB2E 0548FPMW / KAB2E 0604FPFW / KAB3E 0548RPDW


I want to know which step is the most overclockable.
I need help, because i must know in 2 days -_-

Thanks for help!!

[osckhar]

FX-55 @3113MHz

http://www.voodoo3dfx.com/Sale_Trade/FX-55/CPU-Z_verified.jpg

Oscar

[Monstru]

Well...I have a little Sandy too. The IHS is pretty "rubbed" so I don't exactly know the stepping (but I think it might be a CCBWE or a LCBIE, because cpu-id saw it as Toledo, and because it is an E6 revision..and because it goes very good for an E6)

So...

The Rig:

San Diego E6 3700+
AC Freezer 64 Pro
Asus A8N-SLI
2x256 Corsair CMX3200LLPT v1.1 (bh-5)

The Setup

Because of my mobo, I could only provide 1,50v for the CPU and 3,0v for the RAM, so all results are obtained at those values.
All (very cold) air cooling
Temp ambient = +4 degrees Celsius
Location: on the ledge of my window, windows wide open, in the middle of the night :)


The results

1. Max Cpu-Z : 3268Mhz @1,50v - 297x11, ht 3x
http://img291.imageshack.us/img291/8109/max3268mhzzw2.th.jpg (http://img291.imageshack.us/my.php?image=max3268mhzzw2.jpg)
2. Max Spi 1M : 26.250sec @ 3179Mhz - 289x11, ht3x, 239Mhz@2-2-2-5 1T (2-7-12-2-2-5-2-2-1-1)
http://img156.imageshack.us/img156/776/spi317926250seckk4.th.jpg (http://img156.imageshack.us/my.php?image=spi317926250seckk4.jpg)

Conclusion: I need more voltage!


Hi, im new on this forums.
Im going to buy an used SD 3700+ and i have some steps to choose
Here is the CPU stepping code ->>>
ADA3700DAA5BN:

KACAE 0551TPAW / CABGE 0517UPAW / KAB2E 0548FPMW / KAB2E 0604FPFW / KAB3E 0548RPDW


I want to know which step is the most overclockable.
I need help, because i must know in 2 days -_-

Thanks for help!!

I'm also new here, and I'm no guru...but I would say go with the KAB3E or with the KACAE.

This was on a fora some time ago:

KAB1E - Relatively new stepping, reasonable air overclocker. Expect ~ 2.8GHz
KAB2E – Comes in 2 varieties. The older KAB2E’s from mid-late 2005 are decent overclockers which overclock to around 2.9GHz. The newer 2006 KAB2E’s are overclocking like gems at the moment. An example of this is Crash’s and Krunk Kracker’s, which overclock to around 3-3.1GHz. In general KAB2E’s require a lot of voltage to reach the higher overclocks.
KAB3E - A better overclocker and much rarer stepping than the older KAB2E’s. They still require larger Vcore’s to reach the higher speeds but expect ~ 3GHz.
KABNE – An unusual stepping which is hard to get hold of. It performs similarly to the KAB3E so is capable of ~ 3Ghz.
KABYE – Again a rare 3700+ stepping which performs well. Expect ~ 2.9-3GHz
KABQE – As with the KABNE and KABYE, the KABQE is a scarce 3700+ stepping but actually overclocks better than the 2 aforementioned steppings. A typical overclock would be just over 3GHz with low Vcore.
KACAE - Possibly the best chip for air cooling and can reach very high speeds with low voltage. Most KACAE’s will achieve >3GHz, but some steppings (i.e. the 0602GPMW) are capable of 3.2GHz! Unlike the KAB2E’s they do not seem to scale well with Vcore and tend to perform best when at a lower Vcore.
CCBWE - This is an example of an E6 revision 3700+ and is commonly thought of as a Toledo core CPU with one core disabled. A CCBWE will not perform too well on air cooling (around 2.8GHz) but will do very well on sub-zero cooling such as Phase-Change cooling.
CABGE - Old stepping which is not as common lately. Just like the Opteron 146 CABGE they are in general bad overclockers which will usually only reach 2.6GHz-2.7GHz. Fear the cabbage!
KABGE – Similar to the cabbage above. They do slightly better and overclock to around ~2.7GHz but still don’t come close to the more superior later steppings.

[m_enanos]

thanks for help man

[Ku-sama]

I will post later, but its 3GHz 250x12 1.55V 4000+

will post specs of the processor later, I have to rip of the HSF

[alex17 GTX]

My first post here. :D
I have recently bought a San Diego 3700+ E4 cpu. It is KAB1E stepping :banana:
It does 3GHz prime test vdef, 3.1 GHz prime test @ 1.408V and perhaps even more but i haven't tested yet. I also have a screenshot at 3333 mhz but unfortunatelly it isn't cpu-z verified(you will have to trust me, aldo i can run another session and validate it).

My achievements for now:

- cpu-z max: 3333 mhz @ vcore: 1.536
http://img340.imageshack.us/img340/1323/cpuzmax3330mhzscreenshozp0.th.jpg (http://img340.imageshack.us/my.php?image=cpuzmax3330mhzscreenshozp0.jpg)

- super pi 1M max: 3267 mhz @ vcore: 1.504 -- score: 25.391 sec
http://img183.imageshack.us/img183/2699/superpi3267mhz272152202kc2.th.jpg (http://img183.imageshack.us/my.php?image=superpi3267mhz272152202kc2.jpg)

- Prime test 3GHz @ vcore: 1.360
http://img469.imageshack.us/img469/1678/primetest3ghzsa9.th.jpg (http://img469.imageshack.us/my.php?image=primetest3ghzsa9.jpg)

I just bought this cpu and i was impacient to find out how good it is, and my primary target was super pi and cpu-z max so i had no time for prime test. Excepting the prime test screenshot (i had ~ 5C ambient temp) , i used Cooler Master Hyper6+ (fan @ 3300RPM) and zalman SGT1 thermal grease and i had ~ 20C ambiant temperature. ;) I forgot to start smart guardian but my cpu temp was ~ 31C idle .

http://img341.imageshack.us/img341/6530/myrigjq5.th.jpg (http://img341.imageshack.us/my.php?image=myrigjq5.jpg) http://img124.imageshack.us/img124/216/superpi32m3102mhzuw1.th.jpg (http://img124.imageshack.us/my.php?image=superpi32m3102mhzuw1.jpg)

What do you think ? :cool:

[ladderman]

System:
Asus A8N-SLI
Arctic Cooler 64 pro
AMD 64 4000
Corsair TwinX 4400C25 2x512mb
XFX 6800GSXXX
Tagan480-u22 psu

I’m trying to overclock my CPU to match the FSB speeds my ram is rated at. I bought a matched pair of Corsair TwinX 4400C25 which are rated to run at 550mhz, FSB 275, but the highest satiable FSB my CPU will go to is around 235 with a multi x12, core speed 2.8Ghz.

I know the problem is with my CPU because I dropped the multi down x4 and the Ram went up to 275 no prob on a timing 1:1 2.5-4-4-8 T2, 2.7volts. Passed memtest every time I upped the FSB by 10 from a start of 200

Because my cpu is satiable at 2.8 Ghz , multi x12, I tried dropping the multi to x10 so I could get to my rams max fsb 275, but as soon as I get past an FSB of 240 my cpu becomes unstable will not pass the 30 min test on OCCT.

HT is set to X3
Ram timing 1:1 2.5-4-4-8 T2, 2.7volts
PCI-E set to 33Mhz
CPU volt tried from 1.45 to 1.5
CPU temps have never gone past 41c at max load

I know it sound good getting my CPU overclocked to 2.8Ghz, but I feel it’s not getting the most out and my Ram.

Is there anything I’m not doing, or doing wrong. Do I need a better Motherboard or CPC? I’d really appreciate some help from some of you seasoned overclockers, because as you can tell I’m a bit a novice.

[dussandr]

Sry no pics... but odd stepping on 4000+ San Diego

LCB9E/0644 XPMW
Malaysia


4000+ does 3.0ghz @1.4vcore, havent tried higher, yet.
1m time = 28sec

IHS was so concave I've sanded it till all the info is gone, I wrote it on the receipt from 'Egg. :eek:

[Mortician]

SD 3500+ 512kb L2

http://valid.x86-secret.com/show_oc?id=185296

[BTK]

Just got my DH-E6 today (4000+)

I'm running 4x512 MB so I have to do 2T and it bumped it down to 333 MHz.

Gave Ram 2.8 volts amd cpu 1.45 vcore And did 255x11 HTT x3 = 2805 MHz

Bumped ram up to 200 MHz (400 MHz DDR) 2-3-3-5 Dual channel (Cpu/14 ratio)

Prime95 stable 20 hours load is 51 C

With an alpine 64 HSF (seems pretty good for it)

super 1M guessting about 30-32seconds

will post pics soon

[Catalanu]

3100 at default V.

System: Ultra-D rev A02,bios 623-1
coolermaster hyper6+
Mushkin XP3200 TCCD@200:mad:

[MrRevhead]

Catalanu, got stepping info for your chip?

[BTK]

hows my oc on air?

http://valid.x86-secret.com/show_oc?id=189261

[BTK]

more testing

http://valid.x86-secret.com/show_oc?id=189596

and
http://www.shoutupload.com/image-upload/uploads/3r.jpg

http://www.shoutupload.com/image-upload/uploads/bench.jpg

http://www.shoutupload.com/image-upload/uploads/bench2.jpg


edit


ram dual channel

http://www.shoutupload.com/image-upload/uploads/stable2.jpg

last pic w/

2.9 ghz

207 mhz 2-3-3-5 dual

http://www.shoutupload.com/image-upload/uploads/pi.jpg

[Catalanu]

Catalanu, got stepping info for your chip?

KAB1E
The cpu is prime stabile.:banana:

[MrSeanKon]

KAB1E is one of the best SanDiego steppings (easily achieve 2.9 - 3GHz aircooled) but then it is not easy for 3.1GHz cos limits....:cool:

[BTK]

this oc

http://www.shoutupload.com/image-upload/uploads/cpu.jpg

10 hours orthos stable 49c load

29 sec super pi 1M

http://valid.x86-secret.com/show_oc?id=191919