PDA

View Full Version : 4pea/4pea+ new bios 3/4 anytime

MyEpoxDied
12-03-2002, 09:56 AM
Model: EP-4PEA, 4PEA+
BIOS: 4PEA2C02.BIN (4B00)
Fixed:
1.) Added code to show message of Hyper Threading CPU (INTEL regulation).
2.) Added "APIC_4S_14" (MPS Version Control for OS) force Ver1.4.
3.) Solve NVin lose "-".
4.) Control APIC Function by Hyper Threading Function.
H.T Function Enable then APIC Enable and item shaded.
H.T Function Disable then APIC can select En/Disable. (No-Fault)
5.) Define "PciLanROM_Control_by_chipset" for solve LAN control. Bootrom disabled but PCI slot same device LAN will boot from LAN.
6.) Added "PCILANROM_ItemName" for deference PCI LAN.
7.) To support 3:4 and 4:5 at any time.
8.) To solve the Vcore show Voltage departure.
9.) To solve 5VSB value is not correct at define.
10.) To solve system will hang up at POST "AA"(h) after exit from BIOS setup menu by press F10. If FSBF400 and DDR 200 at the last boot.
11.) Modify default to enabled USB2.0 controller.
12.) To solve USB mouse canft enabled.
13.) To solve plug USB 5 in 1 card reader hang up at POST.

Check #7 ;) it's on epox.org right now
RichBa5tard
12-03-2002, 02:45 PM
Does this bios also support the epox 4peae?
libertate
12-03-2002, 04:49 PM
damn :( after I spent all that time wrapping those pins
to turn my 2.66 into a 2.0a :D
MyEpoxDied
12-03-2002, 06:00 PM
I don't see the 3:4 in the bios? does anyone else? :stick:
GreenBeret
12-03-2002, 10:32 PM
I'm not sure about this "3/4 and 4/5 any time". I just put my new 1.8A in, updated the BIOS, and I only have 2 options: 1:1 and 3:4. So it doesn't work for your NW-B CPU either, MyEpoxDied ?

My pin mod is still useful :p
libertate
12-04-2002, 03:13 AM
I can't boot into windows with that bios for some reason....
I spent an hour or so fiddling with it... overclocked,
even with fail-safe settings I can't boot into windows...

also, with my pin-mod still on, I only get 3:4, no 4:5....
(although, I really only need 3:4, but still, would be nice for those that hadn't already done it if they could just flash and have it work)
MyEpoxDied
12-04-2002, 04:17 AM
Maybe they'll post a new bios that actually works :p
libertate
12-04-2002, 05:28 AM
hehe, let's hope :)

but epox is usually good about making new bios files
pretty regularly....