Got Problem need some SMD for X850XT PCI-E

[andL64]

Hi guys

well, as i want to mount my watercooling on my X850XT i slipped away with the screwdriver and broke some smd @ the card on the backsite of the core well i soldered some little ones back to the card like you could find on ram...

but still need 2 of the 16V/22 smd because one i cant find again and 1 i got; i was in conrad and some special elektronic shop but cant get it i ll still search for the specs of it exactly maybe som1 could give me some advice

also on the XL and X800 cars the same smd exists; also thought maybe i could change it with something diffrent?

seEn

and thanks in advance

PS. still got a very bad digi cam but i ll search for a fine picture!

[CaTalyst.X]

I have those SMT components but austria is quite a ways away from the US. Ill send em out to you if you pay for shipping tho :D

-CaT

[andL64]

ok bro

let me know how much it ll cost its always worth for a 450€ card! :)

seEn

[andL64]

here is a pic i marked the right spots.Not as great but still good enough i think. They are marked with 22/16V

[CaTalyst.X]

ohk so u just need the 2 22/16V SMD caps?

-CaT

[andL64]

yes also broke some little smt components near the marked area but still found them on old ram and some old hdds but without the 2x 22/16V i didnt get a picture of the card only running but still the same core voltage.

so i would only need "some" of these 16/22V only 2 are missing but would be great if i could get 5 or so 4 sure u know ;)

would be really glad of you!

seEn

[CaTalyst.X]

k it might be a lil while on those SMTs, ill get back to you, i should have them soon.

-CaT

[andL64]

how its going on? some news bro`?
seEn

[CaTalyst.X]

i cannot find any SMDs so far, i can order u some electrolic caps that would work..

-CaT

[OneProdigy]

Do you still need these smd caps?
Maybe i can help you out.
Besides shipping from germany should be cheaper/quicker. ;)

Please send me a pm if you still need some.

[CaTalyst.X]

Yeah prod he still needs them, help would be great :P

-CaT

[andL64]

yeah thx catalyst and prodigy (will ship some 4 free ;) good guy) for helping me out!

seEn

[OneProdigy]

Lets see if you can revive your x850 with it. ;)
Got 5 of these smd caps desoldered from a wrecked 9700Pro...will ship them to you this week...

Would be nice to hear how it worked out.

Good luck! ;)

[andL64]

muahahaha big thx bro' :D i ll do that

[OneProdigy]

What's the status, andL64...did you get the caps i sent you? :confused:

[andL64]

well...

yes i got em and also soldered it onto but still didnt get a picture from the card *grml*

i thought maybe other smd which i soldered be4 could be damaged and changed some but still got no picture.

today evening when i get time i ll give it again a try and i ll solder all other smds off and again onto if that doesnt help....

i dont know.....!?!

maybe i ll sell it as damaged on ebay or try to get it to a friend who could maybe do the job.
cause i m not such a fool and try to rma it when i had caused it.

but still very very friendly of you all!
especially prodigy

seEn

[OneProdigy]

Sorry to hear that you didn't get it to work yet. :(

Maybe you damaged a trace when you slipped off with the screwdriver... :confused:
Did you take a close look at the area with a magnifier glass?

[andL64]

nope didnt got one only with my eyes.

as i ve time i ll try it again.

seEn

[andL64]

even tried it again....

soldered all 5-6 smt components off and again on but still no go => no picture i didnt try it on the ordinary vga only the dfi but does this make some difference? dunno

i just tried some other smt's and prodigy's smt i used 4 diffrent ones because some get little bit "burned" not really but lil bit brown he sent me 4-5 or so and so i could try with some other and more carefully too but still no go.

i think i could ve hurt some traces when i slipped off with my screwdriver but cant see anything like that but i cant get it running again.

i m not like a fool and try to rma it (as i ve bought it in a shop which has no idea bout such things they wouldnt recognize, but then still got bad gewissen) so what should i do? sell it on ebay as broken or what?

seEn