PDA

View Full Version : not booting at 295 fsb strange problems

Eru
03-25-2005, 09:48 AM
well I installed windows, went to bios set fsb to 9x295 just for start, ram diveder on 133, run memtest from cd, all OK, i try to boot in win no go doeasnt even start. I try everything again, same thing. now Im installing windows at 295 fsb so far so good. my conf wnnie CBBHD0450WPBW epox nda3j+ radeon 9000pro and some kingstone ram. HHEELLLPPP
Eru
03-25-2005, 09:51 AM
my disk is ide, now windows install rebooted so far so good, the weirdest thing ever, cant wait for install to finnish
koei
03-25-2005, 10:19 AM
Maybe your CPU is maxing out. Even tho you can install Windows does not mean it will be stable in Windows. You can try bumping up the vcore. But it's probably better to go back to stock then inch up bit by bit till you find the max oc.
mushk1n
03-25-2005, 10:45 AM
the initial load of windows bootup is probably killing your chip (crashing your system)... bootable memtest doesnt put high load on your CPU and neither does installing windows..
Eru
03-25-2005, 10:47 AM
u must be joking 295 was the start, first fsb, I hate that pgUP and pgDn aint wworking in bios have to go trough all those numbers... windows installed without a problem. but will i have to install windows for every FSB change, very strange... please help, should I use a program and do it from win? i have attached a pic, still testing thouh. next screeny will be 310+ =) it shouldnt be a problem for my 3000+ winnie =)
Eru
03-25-2005, 10:52 AM
forgot the pic, come on mushkin u think Im some kind of noob or what?
Eru
03-25-2005, 11:04 AM
sorry bad pic, paint sucks and I havent anything else installed... here is a new one
i found nemo
03-25-2005, 06:47 PM
try 1.6 see if that helps tha's what most use at that speed or maybe ur ram timings are too tight??? insufficient volts to chipset??? or to memory???? sorry i'm brainstorming


also in your 2 diff screenshots did you up the v.core or is it fluctuating???
Eru
03-25-2005, 11:58 PM
It has something to do with lan, it looks for the some mac adress, I disabled onboard lan now, will se how it goes...
Eru
03-26-2005, 12:19 AM
OK check this out, if I have 295x5 it wont boot, but if I have windows CD in the CD-ROM it boots and its prime stable !!!!!!!! Anyone PLEASE HELP
fareastgq
03-26-2005, 01:00 AM
That just means your install is prob corrupt, if it doesn't work without the cd, prime stable is useless. I've been in the same situation on nforce2 abit board, your not gonna have the cd in there ALL the time though are u? hehe
Eru
03-26-2005, 01:07 AM
please some more info fareastgq, well its not like booting from cd, it goes u wanna boot from cd. I dont do anything then it boots wwindows, please more info...
Eru
03-26-2005, 05:12 AM
hmm I thinkd hdd is bad
Eru
03-26-2005, 12:33 PM
Replaced the hdd, everything cool now =) =)