View Full Version : What LDT/FSB Frequency Ratio do you run with your HTT?
I run 260HTT x 4LDT i have heard this might be too much tho it seems to be ok..
Can people please post their multipliers and there FSB(HTT).
Would love to get a bit more information on it.
SLaY3r07
03-21-2005, 02:37 PM
I run 289 X 9, but my POS Aspire 500W PSU is bringing me down.
Highland3r
03-21-2005, 02:39 PM
260* 4LDT on Neo2 :) Runs up to ~ 275*4 bench stable, thats clockgenned up though :)
Sorry SLaY307.. I was talking about LDT not CPU multi :)
EclectiK
03-21-2005, 11:53 PM
I'm running 300*2.5, 2.5x allows to get up to 500mhz
ECK
270 x4 = 1080 HTT on DFi NF4 ultra
DazzXP
03-22-2005, 12:47 AM
300x4 = 1200Mhz HHT x2 on my DFi SLi-D
DildePer
03-22-2005, 02:22 AM
245x4 = 980 HTT
HTT 450
LDT 2.5
HT 1125
anh divider 133
ProjectGSX
03-22-2005, 08:57 AM
Im running 250x4 due to my POS Abit AV8 mobo. The chip will prime at 2550 but anything past 2250 isnt 3d stable.
pershoot
03-22-2005, 11:40 AM
9x278 @ LDT: 3x
IvanAndreevich
03-22-2005, 11:19 PM
ProjectGSX
Don't use locked AGP/PCI! Use a viable ratio ;)
$SOLID$ Necro
03-23-2005, 12:05 AM
LDT 1 (1to1) :p:
http://www.freepichosting.com/Thumbs/421603672/1/408/502.jpg
11 * 225 @ LDT 5 for 24/7 use.
afireinside
03-23-2005, 04:58 AM
320*9 3x ldt /11 ram
deeppow
03-23-2005, 05:32 AM
Common wisdom for the nF3 boards like you and I are using is to keep the HTT speed between 600 and 800 where (as you know) HTT speed = clock speed * LDT/FSB mult . The newer nF4 boards, plus I believe a few of the later nF3 versions with certain CPUs, have increased the upper limit to 1000.
ProjectGSX
03-23-2005, 02:49 PM
ProjectGSX
Don't use locked AGP/PCI! Use a viable ratio ;)
Thanks man, but Ive tried that. Ive had this system since December.. tried everything once and a second time just to be sure.
And on a side note, I brought my box into our proto lab at work and hooked a scope up to the AGP and PCI slots to monitor bus speeds. The locks are working like a charm all the way up to 300 external clock, which is where I stopped testing.
MusicIsMyLife
03-24-2005, 09:30 AM
LDT is very strange with my Av8.
If I use 5x I can´t go higher than 220 HTT (1100 MHz).
If I use 4x I can go up to 285 HTT (1140 MHz).
If I use 3x or lower I get bluescreens and reboots.
d3birth
03-24-2005, 09:35 AM
2.4ghz a64 3000
LDT x 3
Mem = 220
cantankerous
03-24-2005, 01:13 PM
LDT is very strange with my Av8.
If I use 5x I can´t go higher than 220 HTT (1100 MHz).
If I use 4x I can go up to 285 HTT (1140 MHz).
If I use 3x or lower I get bluescreens and reboots.
I have this on my DFI as well. I was originaly running 285 X 4 but thought lowering it to 3 would allow me to clock higher as 4 was really pushing it. Upon lowering it I had blue screens and freezing in windows. I put it back up to 4 and all was gravy again. Weird.
Super strokey
03-24-2005, 01:25 PM
335x3htt x7multi neo2