View Full Version : Help: PDP RAM on SLI-DR must be on auto to boot
billybatson
03-20-2005, 01:30 PM
...
DazzXP
03-20-2005, 02:01 PM
Have you tried flashing your BIOS? The new one seems to improve compatiability.
billybatson
03-20-2005, 02:30 PM
Have you tried flashing your BIOS? The new one seems to improve compatiability.
yes i had this problem with the bios that came with the board, flashed to newest 3.10 bios and still same thing. I can't slow down my memory timings!
billybatson
03-20-2005, 06:38 PM
anyone???
Rgones timings are purely a guide line. Mine run fine in this board but his timings will NOT work with these sticks verified by me with two different 1GB kits.
I suggest setting everything to auto except the 2.5,3,3,7 enable cpc 2.8v see how that goes. At least flash to the 2/17 bios but I'm on the latest official now 3/10. You should be able to leave chipset and LDT at stock volts.
billybatson
03-20-2005, 11:03 PM
Rgones timings are purely a guide line. Mine run fine in this board but his timings will NOT work with these sticks verified by me with two different 1GB kits.
I suggest setting everything to auto except the 2.5,3,3,7 enable cpc 2.8v see how that goes. At least flash to the 2/17 bios but I'm on the latest official now 3/10. You should be able to leave chipset and LDT at stock volts.
2.5-3-3-7 will not work, i HAVE to run these sticks at 2-2-2-5 or it won't boot, regardless of what all the other settings are and that is my prob, why can't i put loser timings!?!?!?!
I would say you got problems obviously. It could be one of about 100 things. I would check the ram first, then the board, then the PSU. Good luck narrowing it down but the lack of information you give makes it a pure guess.