6600GT SLI 2nd in Class On ORB for 03 and 05 !

[Jasonhk]

Hey Guys,

Here are some new scores, With Chaintech 6600GT SLI

Core @ 609/ Mem @ 1248Mhz, Watercooled: Asetek GPU blocks.
DFI SLI-DR
AMD 3200+ @ 2641Mhz
Kingston BH-5 1:1

3DMark03: Link (http://service.futuremark.com/compare?2k3=3795246)

http://jasonhk.za.net/records/17252.JPG

2nd 3DMark03 on Orb for 6600GT SLI, All Drivers.
http://jasonhk.za.net/records/orb03.JPG

3DMark05: Link (http://service.futuremark.com/compare?3dm05=671252)

http://jasonhk.za.net/records/7763.JPG

2nd 3DMark05 on Orb for 6600GT SLI, All Drivers.
http://jasonhk.za.net/records/orb05.JPG

Aquamark3: Link (http://arc.aquamark3.com/arc/arc_search.php?activeRunID=1830422401)

http://jasonhk.za.net/records/90556.JPG

7th in AquaMark Arc
http://jasonhk.za.net/records/7arc.JPG

These Scores put me 3rd For 3DMark03, 3DMark05 and AquaMark on OCZA < Our local South African Scoreboard :banana:

And 2nd in 6600GT's for 3DMark03, 3DMark05 on ORB, 7th For AquaMark again FX55's

[Jasonhk]

Check this out: Comparison between me (2nd) and 1st position on 3DMark05
http://jasonhk.za.net/images/compare.JPG

His CPU is FX 55 at 3Ghz or so, but my Graphics beat his, Check out the Canyon Flight, I beat him, which means my Graphics cards are actually stronger that his. The other 2 tests are Slightly more Cpu tests so he beats be on those 2...but my 3500+ will come and hopefully i can gain the extra 204 points :)

Then again in 03 you see the same thing happening..
http://jasonhk.za.net/images/compare03.JPG

I once again beat no1 position in Nature, the most Graphics reliant test, the rest he beats be in is more CPU tests especially Wings or Fury. So extra 114 point needed for 1st. :bigsmile: <edit: about 500 needed for first :( Water/H20 Gun :(

[FX Freak]

very nice results :toast:
is the card modded? whats the max benchstable clocks(GPU/RAM) with stock nvidia cooler??

[H2OGun]

... So extra 114 point needed for 1st. :bigsmile:

You need more now... :D Just updated my scores with 2 x stock Asus 6600GT TOP - stock heatsink, no BIOS mod, no hard mod.

EDIT: no pencil mod either.

[Jasonhk]

Well Done! F### you ! lol, anyway your cards clocks too high..:(
And your CPU owns mine...:(

[Jasonhk]

very nice results :toast:
is the card modded? whats the max benchstable clocks(GPU/RAM) with stock nvidia cooler??

Yea it's pencilmodded,

Sitting at 590/1250 With stock cooler, single card. No pencil mods there.

[H2OGun]

SENSORED - lol, anyway your cards clocks too high..:(
And your CPU owns mine...:(

And I still have some reserves which will be published when necessary. :D

But honestly, there are quite a lot of good 6600GTs around here. Check out gochin and mricee scores. I am quite sure theirs are not maxed out yet. So, I won't keep my hope too high for #1 spot. :D

[FX Freak]

Yea it's pencilmodded,

Sitting at 590/1250 With stock cooler, single card. No pencil mods there.

can you give me a link to the pencil mode, plz?? :toast:

[Jasonhk]

Yea, way top 5 is good,

Here is linky to pencil http://www.vr-zone.com/?i=1636&s=1 , mod Only really helps if you've got them under water with the stock heatsink i only gained 5Mhz, It's for a Gainward 6600gt, but works will all standard layout 6600gt's

[LikwidKool]

damn that is sweet!. My 6600gt's clock for crap at 575/1.09 stock.

[Jasonhk]

Chaintech You never thought hey...:)

[gigi77]

Best score is on Approved drivers.......
Luigi

75.90 boost performances

[Jasonhk]

yea it does give a nice boost what about 71.90 or something

[Jasonhk]

Well now I am 1st in my class for 03 and 05 :) see scores in sig :)

[Jasonhk]

Benching again this weekend with 4000+ Claw @ 3200Mhz prolly take all records again..Maybe even Trifecta !! :D Wish us luck guys :D

[Brandybuck]

Benching again this weekend with 4000+ Claw @ 3200Mhz prolly take all records again..Maybe even Trifecta !! :D Wish us luck guys :D
We have a new FX55@3500mhz... :D I'm waiting your score.... ;)

[Micutzu]

We just got a FX-55 too :D, until the LN2 containers are ready we will probably run a few more benches on air ... at least in 2k1 it will be a hell of a battle, Misteroadster and PC-ICE just entered on #2 and #3.

[misteroadster]

#1 :D

[Jasonhk]

#1 :D

Dam, i think that puts us far from you, anyway tomorrow will come and we will try..sitting @ 30500 now.. :rolleyes:

[Micutzu]

#1 :D

Nice one, congrats :toast:
Could you please share with us the rig specs and settings?

[Zyklon5]

The competition is getting tougher we're so much going to love this fight.

Minor setbacks the second card of a awesome clockin' lot of Gigabyte 6600GT's died in our hands the third isn't handling SLI properly so no more AIR runs untill we get it fixed or changed.

And yes we'll use some more exotic form of cooling soon :D

Nice score misteroadster.

[misteroadster]

I used an unmodded Gigabyte 3D1 with poor GPu Clocks : Only 574/1293 , and my sandiego 3700+ clocked at 3224 Mhz.
Motherboard is Gigabyte GA K8NXP-SLI.

Thx for the congratz ;)

[Micutzu]

Back to #1, still aircooled: 31573 (http://service.futuremark.com/compare?2k1=8584090) :D.

[Damien]

Nice scores. I'd like to know what kind of heatsink they used on that 6600GT in that review, it's massive and dropped temps 8c, even with that much more voltage.

Also, with the pencil mod, will the voltage be more if you pencil more graphite on or does that make a difference?

[Micutzu]

#1 in 3DM03 too : 18339 (http://service.futuremark.com/compare?2k3=3989132) :D

[zakelwe]

Some excellent benching in this class now :toast: to all parties involved. Nice and close at the top.

Regards

Andy

[wwwengin]

1 fps is a beating???i don't like that..
i thşnk shamino beats you other sides... :D

[Micutzu]

Congrats JasonHK for the 18350 score, but we're back to #1 :D : 18394 (http://service.futuremark.com/compare?2k3=3989772).

[Neosteve]

Not for long :)

1# in 3DMark 03 and 01.
http://service.futuremark.com/compare?2k3=3990790
http://service.futuremark.com/compare?2k1=8585611

[Jasonhk]

:D
#1 #1 #2 #1

[Micutzu]

Man, it's gonna be a tough benching session tonight, especially for 2k1. Congrats for the scores guys !
BTW, i'm still waiting for some scores from Brandybuck ;).

[Zyklon5]

Hmm ... time to change cooling method air isn't cutting it any more isn't it Micutzu :D ?

[Jasonhk]

Man, it's gonna be a tough benching session tonight, especially for 2k1. Congrats for the scores guys !
BTW, i'm still waiting for some scores from Brandybuck ;).

how'd it go?

[Zyklon5]

Still workin' on it but clocks better then 3050 Mhz on AIR are pretty difficult and it's a 200Mhz CPU difference, the video cards though have no problems 690 Core / 1425 mem :D for 3DM2001.

[Jasonhk]

Still workin' on it but clocks better then 3050 Mhz on AIR are pretty difficult and it's a 200Mhz CPU difference, the video cards though have no problems 690 Core / 1425 mem :D for 3DM2001.

what brand those cards? what happend if you higher the memory clock, does the core have to be clocked down?

[Brandybuck]

Man, it's gonna be a tough benching session tonight, especially for 2k1. Congrats for the scores guys !
BTW, i'm still waiting for some scores from Brandybuck ;).

:toast: yeah man , please wait .... :woot:

[Micutzu]

what brand those cards? what happend if you higher the memory clock, does the core have to be clocked down?

They're Gigabyte, with a full set of mods :D. The core freq doesn't depend on the memory; one of the cards clocks to about 1425-1430 on the mem and then it freezes, the other clocks 1460+ but after 1430 it starts to loose frames.

Meanwhile, back to #1 in 3DM03: 18776 (http://service.futuremark.com/compare?2k3=3994621). Also, we've seen some nice 2k1 runs last night ... Jason's score is next to impossible to beat with just aircooling even if we're very close, but that makes it more challenging :D.

http://www.crazypc.ro/forum/attachment.php?attachmentid=2380

[sang]

.. but that makes it more challenging :D.

good,thats all i wanna hear :D
This is the only way.

[NapalmV5]

Mai frati romanasi mai, apu voi cu 6600 va jucati? :slap: lol

De ce nu 2 x 6800 ultra si trageti pentru cel mai mare score.

Congratz guys. :toast:


Hope saaya don't mind. :D

[Zyklon5]

Napalm but we will, after we put these babies under LN2 we're stepping up to the next level.

[NapalmV5]

Now that's more like it. :)

Salut! romo fellas. Pare bine sa va vad aici la XS. Numa inainte!

Mult noroc si sa rupeti tot de pe primele locuri. :D

[Jasonhk]

They're Gigabyte, with a full set of mods :D. The core freq doesn't depend on the memory; one of the cards clocks to about 1425-1430 on the mem and then it freezes, the other clocks 1460+ but after 1430 it starts to loose frames.

Meanwhile, back to #1 in 3DM03: 18776 (http://service.futuremark.com/compare?2k3=3994621). Also, we've seen some nice 2k1 runs last night ... Jason's score is next to impossible to beat with just aircooling even if we're very close, but that makes it more challenging :D.

http://www.crazypc.ro/forum/attachment.php?attachmentid=2380

Well Done What mods you using?

[Neosteve]

So for me and Jasonhk are using the pencil mod, but it doenst seem to be going very well. Everytime we apply the pencil mod it give us mixed results and isnt really that reliable.

Our next session we will try to solder on resistor on for better results on see how we do.

[Micutzu]

http://www.xtremesystems.org/forums/showthread.php?p=880201#post880201 ;)

[varzmaster]

That's showing 'em. :D

Great work! :woot:

[Jasonhk]

Dam. Well Done, What mods, you using on the cards?