CaTalyst.X
03-12-2005, 12:24 AM
Just wanted to post some updates here.......concerning the x800 pro/xt/pe mods. For the OCP mod, the stock resistor is only 41.2Kohms, so we dont really need the 250K resistors that many guides reccomend, a 50K would be much better suited and would have finer adjustments. Just for reference, the stock vgpu resistor (R1597) is ~1.5KOhms. I unsoldered both resistors during an attempted repair this weekend and I figured alot of ppl could use these values for mods gone bad etc, and cause 250K VRs are sometimes hard to find. Hope this helps yall. Kind of not much info for a whole thread but I wanted ppl to see it so.....here it is :)
-CaT
-CaT