Road to 25k , or even more :)

[ociFalcon]

Okay you guys , i got some time now to do some benching ;)

so , i actually got this :

http://mitglied.lycos.de/atomrofl/benches/24111.JPG

thats with

260x10 winchester
geil ultra-x @260mhz @2,5-3-3-7
MSI 6800NU @ 420/860
Gigabyte K8NS , able to make HTT of 300+

so , what can i do to pull out more outta my rig ?
I tried to do that LOd +3 tweak a few days ago , but it didnt work at all :mad:

my problem is :

when i enter a new Value for LOD (3 ;) ) and then select the value , it doesnt work for me cause when i close rivatuner, the mark will be deselected :stick:

And i dont see something like "save values" there !?

at last i have to say, im sorry for my bad english :(

[ZeroHero]

Okay you guys , i got some time now to do some benching ;)

so , i actually got this :

http://mitglied.lycos.de/atomrofl/benches/24111.JPG

thats with

260x10 winchester
geil ultra-x @260mhz @2,5-3-3-7
MSI 6800NU @ 420/860
Gigabyte K8NS , able to make HTT of 300+

so , what can i do to pull out more outta my rig ?
I tried to do that LOd +3 tweak a few days ago , but it didnt work at all :mad:

my problem is :

when i enter a new Value for LOD (3 ;) ) and then select the value , it doesnt work for me cause when i close rivatuner, the mark will be deselected :stick:

And i dont see something like "save values" there !?

at last i have to say, im sorry for my bad english :(

So you have make the great chosen to bench a 6800NU. That score is low for 420/860. That means you can improve your score a lot :p:

HAve you chosed enable mip maps? try to don't close rivatuner at all when you ran 3dmark. Or will the LOD disapers if you just close direct3d tweaks?
Try out the latest rivatuner and if you have it already you can try 15.3.

Have you pipemoded your card and voltmod it from bios? If you do, how much volt do you give it?

Don't know how much tweaks you use. try to run test in other order than default, for exampel LL,DL,LH,DH,CH, N and run many times car low to ghet a good car low.
Use the ricky pedro tweak, win2k and DX8.1

That was a few tweaks, test them out. Think you potentional of 28k easy with these tweaks. :p:

[ociFalcon]

sounds nice m8 ;)

my 6800NU is running @1,4v , i recieve a waterblock for her tomorrow ;)
maybe i gonna try ~450mhz @ core .
The last 4 Pipes dont work for me -.-


so , i gonna try the tweaks you said to me , except of win2k ;)

cya later , ill be back with some (hopefully) great results !

[skematix]

rofl.....in riva tuner for the program setting you check on, send program to tray, load program on start up and it'll work silly

[ociFalcon]

no , it doesnt work .
i tried it that way!

[ZeroHero]

sounds nice m8 ;)

my 6800NU is running @1,4v , i recieve a waterblock for her tomorrow ;)
maybe i gonna try ~450mhz @ core .
The last 4 Pipes dont work for me -.-


so , i gonna try the tweaks you said to me , except of win2k ;)

cya later , ill be back with some (hopefully) great results !

That was really bad luck if the last pielines don't wanna work :( , but have you got that last vertex to work? very little diffrens but stil there.

When you bench 3dmark01, use agp fastwrite on, you don't get high clocks as you get with it disable, but more fps than with it disabled.

Voltmod it to 1.5 when you get water. There som nice capstitor mods you can try out when you have tweaked it to max. Read a lot, there are much other tweaks than the one i suggested to you.

I'm exicted what your resultats will lock like :cool:

[ociFalcon]

okay , im back , im benched with ricky tweak and Fastwrites On , GFX clocked @380/860 !

i got this : http://mitglied.lycos.de/atomrofl/benches/24316.JPG

without ricky tweak and fastwrites off (GFX= 430/860) , i got this :

http://mitglied.lycos.de/atomrofl/benches/24399.JPG

CPU/Ram is same as before :toast:

Now to my LOD problem :stick: :

i made a screenshot of my Rivatuner Power User config .
i have send it into tray to be sure that LOD +3 is still on .
but it didnt work again!
http://mitglied.lycos.de/atomrofl/benches/lodbias.JPG

[L@TrO]

There is something wrong with your dragon low (and nature results.)
Here is a run of my Msi6800Nu --> http://service.futuremark.com/compare?2k1=8463285 (winxp / no ricky tweak /dx9 / 12pipes 5vertex-shaders ).

[ociFalcon]

yeah , the LOD tweak doesnt work :(

but i just dont find out why , is there something i have to activate or somethin like that?

[L@TrO]

The Lod tweak is not only the problem , my gt1,2 and3 were also without any Lod tweak.

To enable Lod -> Customize -> direct draw and 3d settings -> mipmapping

[ociFalcon]

this was kinda fast ;)

look ;) (http://service.futuremark.com/compare?2k1=8470517)

so , now i think 27k wont be too hard ;)

but why have so many users with 6800NU's about 2k more than me ?


im gonna try Win2k in a few days :toast:

[Geforce4ti4200]

win2k will really help you out, I saw your car high to be in the low 120s, I am getting almost 140 car high with the same winny clocks as you are! as for using lod, setting value to 3 means thats the max lod you can use when you turn the slider, you need to select mipmapping itll show you a slider to move

[ZeroHero]

Can't you overclock it more than 380/860 with AGP FW on? usually it only 20mhz lower clocks.
Did you ran my sugested testorder or some other testorder?

With the LOD problem, just do as Geforce4ti4200 says.

[ociFalcon]

ive already done that LOD tweak , it works now .
i hadnt tried any clocks higher than 380/800 gonna try that soon .

But first im going to install Win2k

Another Question :

when i want to look after other 6800NU's @the ORB , it only displays 6800U's at the top cause theres no own section for 6800NU !?

[isp]

Does DX 8.1 lend much more points than 9.0? :shrug:

PS. You should be able to filter at the ORB by just choosing "Nvidia GeForce 6800" as the graphics chipset. :thumbsup:
If done correctly, you should see Zakelwe, Kunaak, AFI, etc at the top of that class....

[ociFalcon]

what will it bring to me to raise GPU core clock from 410 to 450 ? about 500 points ? or less?

[mr_knowitall15]

hell, good luck gettin much more with the 6800. all i can score is just over 24k. and from browsing the ORB, it seems the Nvidia cards dont really do well in 01.