PDA

View Full Version : 6800 GT/Ultra vgpu

kryptobs2000
03-09-2005, 06:30 AM
here's lardarses guide:

http://www.vr-zone.com.sg/?i=926&s=1

It will increase the vgpu by 0.24v, however thats it. You can't increase or decrease the voltage following his guide other than a bios flash. Is there a mod that would allow me to adjust the voltage? I've tried from 100k up to about 250k following lardarses guide, and it remains at an increase of 0.24v no matter what.
persivore
03-09-2005, 08:39 AM
What is the Vgpu regulator on the card?
alexio
03-09-2005, 09:04 AM
By doing the pencil mod, would that take away the stress on the voltage regulator compared to flashing another bios with highers volts in it?

Allso is there a pencil mod for the vdimm?

Sorry for interrupting your thread :D
persivore
03-09-2005, 09:08 AM
By doing the pencil mod, would that take away the stress on the voltage regulator compared to flashing another bios with highers volts in it?

Allso is there a pencil mod for the vdimm?

Sorry for interrupting your thread :D

There would still be the same stress on the regulator because it is still required to give out the same voltage.
I don't know if there is a pencil mod for the Vdimm.
kryptobs2000
03-09-2005, 07:50 PM
This should be it right?

http://img236.exs.cx/img236/3388/dscf09860ga.th.jpg (http://img236.exs.cx/my.php?loc=img236&image=dscf09860ga.jpg)

Can't find a datasheet and volterra isn't gonna release it, so are there any other options?