View Full Version : Finally 2K 3DMark05 with 9600XT
hkalex
03-06-2005, 07:16 PM
Config :
Athlon 64 DTR3400+ @ 2500 (250X10)
DFI Lan Party UT nF3 250Gb
G.Skill PC4800-LA 256MBX2(Samsung TCCD) @ 250 1T Timming (2.5-4-4-8)
Enermax EG475P-VE(24P)
IBM 120GXP 40GB
GeCube 9600XT -2.8 Hynix @ 628/383
Thermalright SLK-948U
Scores : 2351
Compare Link : http://service.futuremark.com/compare?3dm05=679059
perkam
03-06-2005, 07:49 PM
Congrats, the 9600XT is still the best all-round mainstream card imo and you've helped prove that. Though its a tad discouraging to see an nv 6200 (half XTs cost) doing 3k easily when you unlock the pipes to a 6600, the 9600XT is still very much a king in 01 :up: and hopefully you can prove it there as well.
Congratulations again, though I must say, you have some of the WORST ram timings I've ever seen :eek: :eek: :eek: !!! 250 @ 2T !!! AND cas 3 OMG !!!!
If you could fix the timings up a tad bit like cas 2.5 1t @250, which is too easy with your ram :) , I'm quite sure your results will pick up :up:
Perkam
hkalex
03-07-2005, 06:26 AM
Congrats, the 9600XT is still the best all-round mainstream card imo and you've helped prove that. Though its a tad discouraging to see an nv 6200 (half XTs cost) doing 3k easily when you unlock the pipes to a 6600, the 9600XT is still very much a king in 01 :up: and hopefully you can prove it there as well.
Congratulations again, though I must say, you have some of the WORST ram timings I've ever seen :eek: :eek: :eek: !!! 250 @ 2T !!! AND cas 3 OMG !!!!
If you could fix the timings up a tad bit like cas 2.5 1t @250, which is too easy with your ram :) , I'm quite sure your results will pick up :up:
Perkam
thanks for your reply...
i was using pair of DT-D43 at that time... :D not the pair of G.Skill... :stick:
perkam
03-07-2005, 07:13 AM
i was using pair of DT-D43 at that time...
Is that Hynix D43 ??
Perkam
hkalex
03-07-2005, 10:28 AM
Is that Hynix D43 ??
Perkam
yes~~ :stick:
perkam
03-07-2005, 10:54 AM
yes~~
Then you should know its capable of ~270 @ cas 2.5, 1T so you shouldnt have a problem benching with tighter timings :up:
Perkam
hkalex
03-09-2005, 05:48 AM
Then you should know its capable of ~270 @ cas 2.5, 1T so you shouldnt have a problem benching with tighter timings :up:
Perkam
i am running 2 sticks of that incase :stick:
Rippthrough
03-09-2005, 06:01 AM
Out of interest, how much difference did the CPU overclock make? And could you expect any more points with a 256MG card?
hkalex
03-10-2005, 01:05 PM
Out of interest, how much difference did the CPU overclock make? And could you expect any more points with a 256MG card?
i have tried the default of CPU and overclocked, no different.... :confused:
don_vercetti
03-10-2005, 01:40 PM
9500 pro was the best mid-range card, ati were fools to replace it with the 9600xt. Well they weren't, 9500p was shooting themselves in the foot. But still best mid-range card award has to go to 9500p, not 9600xt.
DrJay
03-11-2005, 02:14 AM
I really like the 9600XT and the rv360 chip itself.......but, to call it a king of '01 is a little far fetched. Other four pipe cards like 5600U, 5700 and 5700U seem to be capable of more with less clock speed in '01. A 6200, even without a softmod should be able to hit 19K at 550+mhz...
Rippthrough
03-11-2005, 05:33 AM
i have tried the default of CPU and overclocked, no different.... :confused:
Good, means I may be in with a chance with an AXP then :p:
hkalex
03-15-2005, 09:04 AM
now i got 2309....no 1 now....:D
http://service.futuremark.com/compare?3dm05=670429
Rippthrough
03-15-2005, 09:06 AM
Looks like fast GFX memory definately makes a difference in 05 then.
What caused the 300pt jump?
hkalex
03-15-2005, 09:18 AM
Looks like fast GFX memory definately makes a difference in 05 then.
What caused the 300pt jump?
mine one cant hit over 365MHz of memory without tweak...... :p:
so i make the core higher and higher... :cool:
Rippthrough
03-15-2005, 09:49 AM
Didn't your core do 660 earlier?
hkalex
03-15-2005, 03:04 PM
Didn't your core do 660 earlier?
yes, but that is enough for the competition between me and my friend... :stick: