Serious NF4 Ultra-D problems :(

[UnreaL]

Grr just like me, HUGE PROBLEMS!

got the Ultra-D, twinmos UTT, XP-120, Winchester 3200+, Saphire X850XT, Seagate 120gb SATA, Tagan 480W all together.

Then I tried to install, all went ok, formatted and gets to the '39 minutes left' in installation, then I get LOADS of errors:


Error setup could not register the OLE control F:\WINDOWS\system32\rsnaenh.dll because of the following error
DllRegister server returned error 2147943405 (800703ED)

Error setup could not register the OLE control F:\WINDOWS\system32\dssenh.dll because of the following error
DllRegister server returned error 2147943405 (800703ED)

H:\I386\NT5.CAT The error code is 00096001
A system-level error occured while verifiying trust

The signature for windows XP professional is invalid. Error code is 80096001
A system-level error occured while verifiying trust

Setup failed to install the product catalogues. This is a fatal error.

so basically at this point im thinking ****

I think it must be my custom Nlite/slipsteamed disks so I get out the original XP SP1 disk, gets to same point again but the error is "IRQL" one, the normal BSOD.. so now im thinking, hmm graphics card?! its a brand new X850XT.. hmm!

So I reboot but this time it doesnt BSOD, install goes through.
XP is shugger slow, I mean it explorer keeps crashing out when I open 'my computer'.

Anyways I thought, worth another try with my custom disk (tested and working like 10times before on NF2/NF3 machines) and again we are back to the error above...

HELP!

Temps:
CPU 30
NB 40

Bios: 1/25.

Other info:
The X850 is untested, that is the only BSOD I have had, seems fine and that area of case is nice and cool.
The 2*512 Twinmos UTT are untested also, recieved this morning.

Error's appear to be coming from my XP installation, but I have no clue what could be causing them. There is nothing removed to my knowledge that should cause error's this bad.

I also used the other 3 custom XP disks and they all get the same error, which is very wierd!

[UnreaL]

bump help please

I cant use any of the winflash's because XP just so slow it crashes on loading anything including floppy/partition.

[eva2000]

i hope you memtested your memory before installing windows, i always run a few loops in memtest prior to os install => http://i4memory.com/showthread.php?t=6 :)

try 217 or 218 bios too

[UnreaL]

Ok OCZ Memtest 1.00 test #5, 10min, 8 passes, 1 error.

Timings =
a3. 2.5
a4. 04
a5. 07
a6. 04
a7. 07
a8. 14
a9. 05
a10. 03
a11. 02
a12. 05
a13. 3120
a14. 05
2.9V

hows that seem?

[Charloz24]

Doesn't twinmoss UTT need more voltage? Like OCZ VX.....try upping the vdimm!

[eva2000]

use memtest86+ v1.51 from www.memtest.org

for AMD64 test #5, #6, #7, and #8 are important but i'd do a full loop of test #1-8 a few times too

[Gogeta]

Is the HD new as well? Have you tested it in another pc? What is the revision of your mobo? You can find it on a sticker on the bottom pci slot.

[situman]

was everything stock (non overclocked) when u install?

[UnreaL]

Is the HD new as well? Have you tested it in another pc? What is the revision of your mobo? You can find it on a sticker on the bottom pci slot.

HD is old, used on NF2 + NF3.. so known to be working, as is the PSU.

Hmm where is this sticker?

And yeh, all stock when I installed.