Cpu-Z 1.27

[Theo404]

Anyone noticed a lack of memory frequency in the new cpuz (1.27)?

http://www.xtremesystems.org/forums/attachment.php?attachmentid=25175&stc=1

Happens to me, specs in sig.

[kiwi]

Np with my cpuz. Try running cpuz again. Sometimes I don't get many numbers at all. Then I simply restart cpuz application several times if necessary.

[HardcoreNL]

Same problem here. Never looked at it, but now you say it i'm going back to 1.26

[glock19owner]

No problems at all...but if I run my memory too high or too tight of timings that will occur...even with version 1.26

http://home.insightbb.com/~myglock19/1.27.JPG

[ken]

It happen to me ONLY WHEN I use 183(9/10) divider regardless CPU-Z version :banana:

[Rabidmoose171]

I dont have the problem either, i simply just restart the program a few times when it doesnt display everything.

[Theo404]

I'm at close to stock settings, never happened before, (sure I've had the faulty load when it doesnt display much before) never changes. Had this version for a about a week and it just doesnt display it. Using 1:1 and 5:4 divider during this time.

Ah well, back 1.26 I guess.

[cpuz]

Hi,
please download version 1.27 again, you'll get the memory frequency back.

[Theo404]

I really appreciate the response, but your site seems to be down…..will try tomorrow.

Thanks again though. :)

[Theo404]

Just became avaliable.

Brilliant (non-paying) customer service or what?

Totaly fixed..... :toast:

Anyone experiencing problems, just re-download.

Props go to you cpuz !

[Highland3r]

Having the same issue here... Will try the new version later on though :)

[vapb400]

redownloading fixed mine as well

[Gaz123]

yes i had it to but to get a jpeg with it on just press refresh very fast and then take the pic and you get it there. :D

[googles]

@cpuz

just wondering if is it possible to display 1T/2T or CPC ON/OFF in the memory tab?

[Theo404]

Yeah I'd like that, having comand rate shown would save having to have A64 Tweaker open in screenshots.... :)

[kryptobs2000]

And show timings less than 2-2-2

[cpuz]

@cpuz

just wondering if is it possible to display 1T/2T or CPC ON/OFF in the memory tab?

Yes good point. I'll add more memory timings in the next version, and also expect to support more chipsets (especially SiS). It's just sometimes hard to find the good docs.

[eva2000]

Yes good point. I'll add more memory timings in the next version, and also expect to support more chipsets (especially SiS). It's just sometimes hard to find the good docs.
could you possible make the memory timings and SPD tabs a collapseable tab for the main tab, so i don't need to open 2 instances of cpuz to do this

http://www.fileshosts.com/DFI/NF4_SLI_D/results/3200_0445_VPMW/Kingston/KHX3200K2/2x256/17_3/LDT3x/270-270-2226-8-14-2222-1T-1.63-3.6-1.5_16x_7x/pifast_4366_tn.jpg

sort of like clockgen's expandable tabs :)

[kryptobs2000]

could you possible make the memory timings and SPD tabs a collapseable tab for the main tab, so i don't need to open 2 instances of cpuz to do this

sort of like clockgen's expandable tabs :)

Maybe instead of that you could just have an extra tab, or option to display all the info that is generally shown when taking screenshots? that would be a good idea I think. Maybe this is getting into more random ideas now, but just a suggestion.

[cpuz]

This is a bit complicated, the all expanded tabs would be too high for most resolutions.
And all relevant information would not fit in one page.
Layout design is headache :-)

[GRAFiZ]

Odd, never had any problem with it, in fact, CPU-Z is the only program that correctly displays my half multi information.

Great little program it is. Thanks for it!

[glock19owner]

Odd, never had any problem with it, in fact, CPU-Z is the only program that correctly displays my half multi information.

Great little program it is. Thanks for it!

You do reallize that the A64's do not offically support .5 multipliers and that you are in fact running in async with memory to compenstate for the none programed .5 multipliers...

[GRAFiZ]

You do reallize that the A64's do not offically support .5 multipliers and that you are in fact running in async with memory to compenstate for the none programed .5 multipliers...

I am aware of that... right now I'm not anyhow, I'm running at 8x313.

But when I was running at .5 I saw no detectable slow down in bechmarks, also, supposedly the way my ram was running was actually at a faster speed then reported.

[Shane5578]

it hasnt got the validation code at the bottom anymore

[LittleDevil]

@cpuz

just wondering if is it possible to display temperatures (CPU, MB...)

[Theo404]

I think these new ideas might be asking a little much of one program. Its a great little program party because of just that, its little. Not a system drain, and not over complicated....it just works.