NF3/NF4 & TCCD - Highest stable clocks - REPORT IN !!!

[bachus_anonym]

Hello there fellow Xtreme OCers!!!

I know many of you guys have some TCCD mems (AData, Geil, Gskill, OCZ, etc.) and tried to squeze out last drop out of them... And now it's time to show it to all of us what those babies are made of.


NOW... Here's the catch! If you think that SuperPI 1M-8M or Sandra are a sign of stability, then don't even bother showing it to us... There are many other threads more suitable for that kind of "stunts" in Xtreme Bandwidth forums.

So, for instance, if you have a set of TCCD that breaks DDR600 barrier @ 7-3-3-2.5-1T w/ SPi 32M and min. x7 multiplier then don't hesistate and bring it here... It would be very appreciated if you could add Sandra and A64Tweaker screens at same exact settings that forementioned SuperPi run was made... Just to give others an idea how to make theirs TCCD perform stable at higher speeds ;)

Just remember... This is not a race :) It's supposed to be an informational thread. Only screenshots need apply ;)

Update Nov 25th, 2005: Any new entry above 315MHz x-3-3-2.5-1T is now ***required*** to be accompanied by at least 8 photos taken at various stages of SPi32M run. AndreYang's 321Mhz WR result is a PERFECT example of how it should be documented.

Come on, guys, and don't be shy! Just take a screenshot, save it as .PNG and post it here....
--------------------------------------------------------------------
4x512MB :D

TRCD=3

AndreYang - 300x10=3000MHz DDR600 @ 5-3-3-2.5-2T (http://pic.digital-info.net/Andre/300-1T2T/512-1.JPG) - DFI Venus (NF4 SLi-DR) - A64 Venus - GeIL One ES PC4800
szukalski - 273x11=3003Mhz DDR546 @ 5-3-3-2.5-1T (http://img469.imageshack.us/img469/3721/pi32mtccd4x512273mhz2pt53356of.jpg) - DFI Ultra-D (NF4 Ultra) - A64 Venus - GeIL Ultra-X + One S PC4800
amrgb - 286x9=2574MHz DDR468 @ 8-3-3-2.5-2T (http://img128.echo.cx/img128/1038/ddr5722gb9no.jpg) - DFI Ultra-D (NF4 Ultra) - A64 Winchester - Gskill PC4400LE

TRCD=4

ixtapalapaquetl - 300x10=3000MHz DDR600 @ 8-4-4-2.5-2T (http://img477.imageshack.us/img477/9885/v3024x512832da.png) - DFI Venus (NF4 SLi-DR) - A64 Venus - G.Skill PC4800FF
AndreYang - 300x10=3000MHz DDR600 @ 5-3-4-2.5-2T (http://pic.digital-info.net/Andre/300-1T2T/512-2.JPG) - DFI Venus (NF4 SLi-DR) - A64 Venus - GeIL One ES PC4800
Major - 285x10=2850MHz DDR570 @ 6-3-4-2.5-2T (http://www.xtremesystems.org/forums/attachment.php?attachmentid=33226) - DFI SLi-D (NF4 SLi) - A64 San Diego - Gskill PC4400LE + Gskill PC4800LA
Deus Falsus - 285x10=2850MHz DDR570 @ 8-4-4-2.5-2T (http://img131.imageshack.us/img131/7404/clip8xxx3yo.png) - DFI Ultra-D (NF4 Ultra) - A64 San Diego - Gskill PC4400LE + Gskill PC4800FF
slimais - 270x10=2702MHz DDR540 @ 8-3-4-2.5-2T (http://bildez.lv/bildes/someonesick/noteam/orig/1134152703.jpg) - DFI Ultra-D (NF4 Ultra) - A64 Venice - OCZ EL PC3200 Rev2
ThunDA - 264x11=2904MHz DDR528 @ 8-3-4-2.5-2T (http://www.xtremesystems.org/forums/showpost.php?p=965890&postcount=203) - DFI Ultra-D (NF4 Ultra) - A64 San Diego - OCZ EL PC3200 Rev2

2x512MB

TRCD=3

AndreYang - 321x9=2889MHz DDR642 @ 6-3-3-2.5-1T (http://www.xtremesystems.org/forums/showpost.php?p=1154158&postcount=285) - DFI SLi-DR (NF4 SLi) - A64 Venus - GeIL One ES PC4800
Delly - 321x9=2889MHz DDR642 @ 6-3-3-2.5-1T (http://img32.imageshack.us/img32/5425/pi32mb321mhz3vt.jpg) - DFI SLi-DR (NF4 SLi) - A64 FX San Diego - GeIL One ES PC4800
LoKi2k - 320x10=3200MHz DDR640 @ 5-3-3-2.5-1T (http://foto.arcor-online.net/palb/alben/20/532920/1280_6435643735613262.jpg) - DFI Ultra-D (NF4 Ultra) - A64 Venus - Gskill PC4400LE
gigi77 - 317x9=2854MHz DDR634 @ 6-3-3-2.5-1T (http://img455.imageshack.us/img455/1469/3170hn.png) - DFI Ultra-D (NF4 Ultra) - A64 FX San Diego - GeIL One ES PC4800
Onepagebook - 316x10=3163MHz DDR632 @ 0-3-3-2.5-1T (http://img373.imageshack.us/img373/4937/ddr63232m7zh.jpg) - DFI SLI-DR (NF4 SLi) - A64 FX San Diego - Gskill PC4800FF
windwithme - 315x9=2835MHz DDR630 @ 6-3-3-2.5-1T (http://img291.imageshack.us/img291/928/3155ru.jpg) - DFI Ultra-D (NF4 Ultra) - A64 Venice - Gskill PC4800FF
tansel - 312x8=2496Mhz DDR624 @ 6-3-3-2.5-1T (http://img396.imageshack.us/img396/2444/31232m28rj.jpg) - DFI Ultra-D (NF4 Ultra) - A64 Toledo - GeIL One S PC4800
Matrox - 311x8=2488MHz DDR622 @ 5-3-3-2.5-1T (http://img198.imageshack.us/img198/6363/geiles5ub.jpg) - DFI Ultra-D SLi-mod (NF4 SLi) - A64 Venice - GeIL Xtreme PC4800
tw159134 - 310x9=2792MHz DDR620 @ 5-3-3-2.5-1T (http://www.xtremesystems.org/forums/showpost.php?p=1053478&postcount=239) - DFI Ultra-D (NF4 Ultra) - A64 Venice - Gskill PC4800FF
865pe - 310x9=2792Mhz DDR620 @ 5-3-3-2.5-1T (http://img268.imageshack.us/img268/9540/3106ub.jpg) - DFI Ultra-D (NF4 Ultra) - A64 San Diego - Gskill PC3200FX
poiuy223 - 310x8=2480Mhz DDR620 @ 5-3-3-2.5-1T (http://www.insanetek.com/images/poiuy223/geil%20results/310mhz.JPG) - DFI Ultra-D (NF4 Ultra) - A64 Venice - GeIL One ES PC4800
szukalski - 310x8=2482Mhz DDR620 @ 6-3-3-2.5-1T (http://img488.imageshack.us/my.php?image=ddr620at2pt5336pi32m29m120bt.jpg) - DFI Ultra-D (NF4 Ultra) - A64 Venice - GeIL One S PC4800
formyfaith - 309x10=3090MHz DDR618 @ 5-3-3-2.5-1T (http://myhome.hanafos.com/~onechu/ramresults/gskill_ff_309_32mbspi.jpg) - DFI Ultra-D (NF4 Ultra) - A64 San Diego - Gskill PC4800FF
BioPC - 308x8=2464MHz DDR616 @ 7-3-3-2.5-1T (http://img251.imageshack.us/img251/8409/oczddr6162er.jpg) - DFI Ultra-D (NF4 Ultra) - A64 Winchester - OCZ EL PC3200 Rev2 (TCC5)
TheMeatFrog - 307x10=3070MHz DDR614 @ 6-3-3-2.5-1T (http://img366.imageshack.us/img366/3016/3070xf.png) - DFI Ultra-D (NF4 Ultra) - A64 Venus - Gskill PC4800FF
qk4723Deluxe - 306x11=3366MHz DDR612 @ 6-3-3-2.5-1T (http://home.pchome.com.tw/club/qk4723/GeIL.TCCD/GeILisGOOD.jpg) - Asus A8N SLi (NF4 SLi) - A64 San Diego - GeIL One SE PC4800
Bamboo - 306x9=2754MHz DDR612 @ 6-3-3-2.5-1T (http://members.shaw.ca/tsopin/0718052.gif) - DFI Ultra-D SLi-mod (NF4 SLi) - A64 Venice - GeIL One SE PC4800
ianocean - 306x8=2448MHz DDR612 @ 7-3-3-2.5-1T (http://img50.imageshack.us/img50/51/306trcd35cy.jpg) - DFI Ultra-D (NF4 Ultra) - A64 Venice - GeIL One SE PC4800
amrgb - 305x8=2440MHz DDR610 @ 6-3-3-2.5-1T (http://img131.imageshack.us/img131/6337/ddr6109oq.jpg) - DFI Ultra-D (NF4 Ultra) - A64 Winchester - Gskill PC4400LE
dogsx2 - 301x10=3012MHz DDR602 @ 6-3-3-2.5-1T (http://img525.imageshack.us/my.php?image=301fx9gm.jpg) - DFI Ultra-D (NF4 Ultra) - A64 Venus - GSkill PC3200FX
Clevor - 301x9=2709MHz DDR602 @ 7-3-3-2.5-1T (http://www.xtremesystems.org/forums/attachment.php?attachmentid=34075) - DFI Ultra-D (NF4 Ultra) - A64 San Diego - PQI Turbo PC3200
Zeus - 300x10=3000MHz DDR600 @ 7-3-3-2.5-1T (http://www.xtremesystems.org/forums/attachment.php?attachmentid=38111&stc=1) - DFI Ultra-D (NF4 Ultra) - A64 Venus - Gskill PC4400LE
qk4722 - 300x9=2700MHz DDR600 @ 6-3-3-2.5-1T (http://home.pchome.com.tw/club/qk4723/qk4722/270032m1.PNG) - DFI Ultra-D (NF4 Ultra) - A64 Venice - GeiL UltraX PC3200
Matias - 300x9=2700MHz DDR600 @ 6-3-3-2.5-1T (http://img467.imageshack.us/img467/2438/300x926m1234s5xs.jpg) - DFI Ultra-D (NF4 Ultra) - A64 Venice - OCZ EL PC3200 Rev2
Super Nade - 300x9=2700MHz DDR600 @ 8-3-3-2.5-1T (http://img355.imageshack.us/img355/1146/32mstable4xx.jpg) - DFI SLi-DR (NF4 SLi) - A64 Toledo - PDP Patriot XBLK PC4800
sierra_bound - 296x12=3560MHz DDR592 @ 6-3-3-2.5-1T (http://img369.imageshack.us/img369/4153/fx32m9hj.jpg) - DFI Ultra-D (NF4 Ultra) - A64 FX San Diego - Gskill PC4800FF
ex2cib - 295x9=2655MHz DDR590 @ 7-3-3-2.5-1T (http://www.xtremesystems.org/forums/attachment.php?attachmentid=33699) - DFI Ultra-D (NF4 Ultra) - A64 Venice - OCZ EL PC3200 Rev2 (TCC5)
ianocean - 292x9=2629MHz DDR582 @ 7-3-3-2.5-1T (http://img272.echo.cx/my.php?image=tccd32m29206ml.jpg) - DFI Ultra-D (NF4 Ultra) - A64 Winchester - Geil One SE PC4800
cupra - 290x11=3190MHz DDR580 @ 7-3-3-2.5-1T (http://www.xtremesystems.org/forums/attachment.php?attachmentid=33817) - DFI SLi-DR (NF4 SLi) - A64 FX ClawHammer - Gskill PC4800FF
.: Eru :. - 290x9=2610MHz DDR580 @ 6-3-3-2.5-1T (http://img339.imageshack.us/img339/8333/pi32m0bj.jpg) - DFI Ultra-D (NF4 Ultra) - A64 Venice - PQI Turbo PC3200
JediMaster - 290x9=2610MHz DDR580 @ 8-3-3-2.5-1T (http://img41.echo.cx/my.php?image=x9h290t2p5338all24wk.png) - DFI Ultra-D (NF4 Ultra) - A64 Venice - PDP Patriot XBLK PC3200
eraser - 290x9=2610MHz DDR580 @ 7-3-3-2.5-1T (http://img140.echo.cx/my.php?image=2610stable6bv.jpg) - DFI Ultra-D (NF4 Ultra) - A64 Winchester - Twinmos TwisterPro PC3200
Sucka - 288x12=3460MHz DDR576 @ 6-3-3-2.5-1T (http://suckasd.com/computer/fx57/32mpi.jpg) - DFI SLI-DR (NF4 SLi) - A64 FX San Diego - Gskill PC4400LE
bronx_klokr - 285x10=2850MHz DDR570 @ 8-3-3-2.5-1T (http://www.xtremesystems.org/forums/attachment.php?attachmentid=38709) - DFI SLI-DR (NF4 SLi) - A64 manchester - OCZ EL PC3200 Rev2
by -=Merlin=- - 368x8.5=3005MHz DDR568 @ 5-3-2-2.5-1T (http://hslab.pl/Merlin/368_284.jpg) - DFI NF4 Expert (NF4 Ultra) - A64 Venice - OCZ EL PC3200 Rev2 (TCCD)
Mrki - 346x9=3114MHz DDR566 @ 7-3-3-2.5-1T (http://mitglied.lycos.de/siedl/9x346.jpg) - DFI SLI-DR (NF4 SLi) - A64 Winchester - OCZ EL PC3200 Rev2
4X4N - 270x10=2700MHz DDR540 @ 8-3-3-2.5-1T (http://www.xtremesystems.org/forums/attachment.php?attachmentid=32358) - DFI Ultra-D (NF4 Ultra) - A64 Venice - OCZ EL PC3200 Rev2 (TCC5)
JDizzle - 265x10=2650MHz DDR530 @ 7-3-3-2.5-1T (http://img240.exs.cx/img240/15/23nm.jpg) - DFI UT (NF3 250Gb) - A64 Newcastle - Kingston HyperX
ZX6R - 260x11=2860MHz DDR520 @ 6-3-3-2.5-1T (http://img243.imageshack.us/img243/9459/superpi32m1ax.jpg) - DFI SLi-DR (NF4 SLi) - A64 San Diego - Gskill PC4800FF
i found nemo - 260x9=2340MHz DDR520 @ 5-3-3-2.5-1T (http://www.xtremesystems.org/forums/attachment.php?attachmentid=44960) - DFI NF3 UT (NF3 250Gb) - A64 ClawHammer - Gskill PC3200FX

TRCD=4

NamelessOne - 330x7=2315MHz DDR660 @ 8-4-4-2.5-1T (http://img411.imageshack.us/img411/5476/30024nl.jpg) - DFI Ultra-D (NF4 Ultra) - A64 Venus - Mushkin XP4400
A64FX - 328x7=2296MHz DDR656 @ 8-4-4-2.5-1T (http://img412.imageshack.us/img412/7742/biosfx60test075recorddelmondot.gif) - DFI Ultra-D (NF4 Ultra) - A64 Venice - GSkill PC4400LE
CapFTP - 325x8=2600MHz DDR650 @ 8-4-4-2.5-1T (http://forum.overclocklab.net/images/forum/CapFTP/Recensioni/GSkill/2x512_LA/325x8_spi32mb.JPG) - DFI SLi-D (NF4 SLi) - A64 San Diego - Gskill PC4800LA
BioPC - 322x9=2901MHz DDR644 @ 7-3-4-2.5-1T (http://img167.imageshack.us/img167/184/322fsb6ja.jpg) - DFI Ultra-D (NF4 Ultra) - A64 Venice - OCZ EL PC3200 Rev2 (TCC5)
qk4722 - 322x9=2898MHz DDR644 @ 6-3-4-2.5-1T (http://home.pchome.com.tw/club/qk4723/qk4722/GEILONE.PNG) - DFI Ultra-D (NF4 Ultra) - A64 Venice - GeiL UltraX PC3200
TheMeatFrog - 321x8=2568MHz DDR642 @ 8-3-4-2.5-1T (http://img274.echo.cx/img274/779/ram3210ee.jpg) - DFI Ultra-D (NF4 Ultra) - A64 Venice - Gskill PC4800LA
Malph - 320x9=2880MHz DDR640 @ 8-3-4-2.5-1T (http://img105.imageshack.us/img105/9941/320pi9kb.jpg) - DFI Ultra-D (NF4 Ultra) - A64 Venice - OCZ EL PC4800 Platinum
865pe - 320x9=2880Mhz DDR640 @ 6-3-4-2.5-1T (http://img108.imageshack.us/img108/1692/screenshot0067gf.jpg) - DFI Ultra-D (NF4 Ultra) - A64 Venus - Gskill PC3200FX
msimax - 320x9=2880Mhz DDR640 @ 7-4-4-2.5-1T (http://img108.imageshack.us/img108/1692/screenshot0067gf.jpg) - DFI Ultra-D (NF4 Ultra) - A64 Toledo - Patriot PDC1G4800+XBLK
Skip - 320x8=2560MHz DDR640 @ 6-3-4-2.5-1T (http://www.xtremesystems.org/forums/attachment.php?attachmentid=24797&stc=1) - DFI Ultra-D (NF4 Ultra) - A64 Winchester - Gskill PC4400LE
quicksilverXP - 320x8=2560MHz DDR640 @ 7-3-4-2.5-1T (http://centon.infopop.cc/evefiles/photo_albums/3/6/7/3670034113/4670091413_BB8C6E253EAE13FB46E3159B0E806644.JPG) - DFI Ultra-D (NF4 Ultra) - A64 Winchester - Centon Gemini LL PC3200
Opteron96 - 320x8=2561MHz DDR640 @ 7-3-4-2.5-1T (http://xs22.xs.to/pics/05130/320_2561_32MB_red.JPG) - DFI Ultra-D (NF4 Ultra) - A64 Winchester - OCZ EL PC3200 Rev2
longsiew - 320x7=2240MHz DDR640 @ 5-4-4-3.0-1T (http://img25.imageshack.us/img25/2791/superpi32mil320mhz3445285vdimm.jpg) - DFI Ultra-D (NF4 Ultra) - A64 Venice - GeIL One SE PC4800
Ziku - 318x8=2544MHz DDR636 @ 7-3-4-2.5-1T (http://photobucket.com/albums/b36/Ziku/?action=view&current=DDR636.gif) - DFI Ultra-D (NF4 Ultra) - A64 Venice - Gskill PC4400LE
zungkono - 319x9=2644MHz DDR632 @ 7-3-4-2.5-1T (http://img456.imageshack.us/my.php?image=316trcd4ds5128v3au.png) - DFI Ultra-D (NF4 Ultra) - A64 Venus - Gskill PC3200FX
dnavarro - 315x10=3148MHz DDR630 @ 11-3-4-2.5-1T (http://pg.photos.yahoo.com/ph/dnavarro77@sbcglobal.net/detail_hires?.dir=deb5&.dnm=e135.jpg) - DFI Ultra-D (NF4 Ultra) - A64 FX ClawHammer - Gskill PC4400LE
dogsx2 - 315x9=2835MHz DDR630 @ 7-3-4-2.5-1T (http://img113.imageshack.us/img113/3238/gskill44003152by.jpg) - DFI Ultra-D (NF4 Ultra) - A64 Toledo - GSkill PC4400FC
ncsa - 315x8=2520MHz DDR630 @ 7-3-3-2.5-1T (http://www.xtremesystems.org/forums/attachment.php?attachmentid=33716) - DFI SLi-DR (NF4 SLi) - A64 Venice - GeIL ONE Series PC3200
XiN - 315x7=2205MHz DDR630 @ 7-4-4-2.5-1T (http://img273.echo.cx/my.php?image=ddr630744259pe.jpg) - DFI Ultra-D (NF4 Ultra) - A64 Winchester - Gskill PC4400LE
Zeus - 314x10=31400MHz DDR628 @ 5-3-4-2.5-1T (http://img.photobucket.com/albums/v620/Z3us/SuperPifactory/SPi32M22target.jpg) - DFI Ultra-D (NF4 Ultra) - A64 Venus - Gskill PC4400LE
Eldonko - 313x9=2817MHz DDR626 @ 0-3-4-2.5-1T (http://members.shaw.ca/Eldonko/313-1.JPG) - DFI Ultra-D (NF4 Ultra) - A64 San Diego - OCZ EL PC4200 Platimum (TCC5)
GRAFIZ - 313x8=2504MHz DDR626 @ 7-3-4-2.5-1T (http://home.comcast.net/~grafiz/pipic.jpg) - DFI SLI-DR (NF4 SLi) - A64 Winchester - Gskill PC4400LE
njkid32 - 312x10=3125MHz DDR624 @ 6-3-4-2.5-1T (http://img468.imageshack.us/img468/3115/capture102520052056575wp.png) - DFI Ultra-D (NF4 Ultra) - A64 Venus - G.Skill PC4400FC
-Wolverine- - 312x9=2808MHz DDR626 @ 7-3-4-2.5-1T (http://img325.imageshack.us/my.php?image=sd32m312x929mn.jpg) - DFI Ultra-D (NF4 Ultra) - A64 San Diego - GeIL One S Pc3200
dogsx2 - 310x10=3102MHz DDR620 @ 6-3-4-2.5-1T (http://img226.imageshack.us/my.php?image=31050401480sf.jpg) - DFI Ultra-D (NF4 Ultra) - A64 Venus - GSkill PC3200FX
dinos22 - 310x10=3102MHz DDR620 @ 7-3-4-2.5-1T (http://img128.imageshack.us/my.php?image=310mhz253471t29vsuperpi32mpass.jpg) - DFI Ultra-D (NF4 Ultra) - A64 Venus - GSkill PC4800FF
mikead_99 - 310x10=3102MHz DDR620 @ 6-3-4-2.5-1T (http://mysite.verizon.net/res6otqr/sitebuildercontent/sitebuilderpictures/SPi_32M_24_14.078.jpg) - DFI Ultra-D (NF4 Ultra) - A64 Venice - Gskill PC4800LA
RyderOCZ - 310x8=2482MHz DDR620 @ 7-3-4-2.5-1T (http://dragoncc.sytes.net/pics/DFI310TCCDXS.png) - DFI Ultra-D SLI-mod (NF4 Ultra) - A64 Winchester - OCZ EL PC3200 Rev2
eraser - 310x8=2482MHz DDR620 @ 7-3-4-2.5-1T (http://img140.echo.cx/my.php?image=ddr6203rg.jpg) - DFI Ultra-D (NF4 Ultra) - A64 Winchester - Twinmos TwisterPro PC3200
dogsx2 - 309x9=2785MHz DDR618 @ 8-3-4-2.5-1T (http://img474.imageshack.us/my.php?image=3095ram7yw.jpg) - DFI Ultra-D (NF4 Ultra) - A64 Venus - OCZ EL PC4800 Platinum (TCC5)
need.for.mhz - 308x9=2772MHz DDR612 @ 5-3-4-2.5-1T (http://img.photobucket.com/albums/v298/Kapucyn/PC/Best32MCalc.jpg) - DFI SLI-DR (NF4 SLi) - A64 Venice - OCZ EL PC3200 Rev2 (TCC5)
eva2000 - 306x10=3060Mhz DDR612 @ 6-3-4-2.5-1T (http://www.fileshosts.com/DFI/NF4_SLI_D/results/Opteron146/CAB2E_0540FPMW_1/Hydrocool200/Patriot/PC3200XBL/2x512/1_2/704_2BTA/LDT3x/10x/306-306-2.5436-9-24-2223_1.51-1.4-1.6-2.69_3684_dsW4dds1_16clk_9N65_16x7x/superpi-32m_tn.jpg) - DFI Ultra-D (NF4 Ultra) - A64 Venus - patriot PC3200XBL
funkflix - 305x10=3050MHz DDR610 @ 5-3-4-2.5-1T (http://213.202.211.105/gravedigga/0546GPAW/geil_one_305_2.5.3.3.5_2.7V.jpg) - DFI Ultra-D (NF4 Ultra) - A64 Venus - GeIL One S Pc3200
slimais - 305x9=2745MHz DDR610 @ 6-3-4-2.5-1T (http://fotki.lv/fotki/all/3/272/27183/101959/big/869534299998.jpg) - DFI Ultra-D (NF4 Ultra) - A64 Venice - OCZ EL PC3200 Rev2
szukalski - 305x9=2745Mhz DDR610 @ 7-4-4-2.5-1T (http://img465.imageshack.us/my.php?image=305mhz26m462pt54474yl.jpg) - DFI Ultra-D (NF4 Ultra) - A64 Venice - GSkill PC3200FC
deff_ins - 305x9=2745MHz DDR610 @ 8-3-4-2.5-1T (http://fotki.lv/fotki/all/4/326/32511/138181/big/1022631500556.jpg) - DFI Ultra-D (NF4 Ultra) - A64 Winchester - Corsair TwinX PC4400 c25
CTKP - 305x8=2440MHz DDR610 @ 7-3-4-2.5-1T (http://img242.echo.cx/img242/9219/8x305pi32m4kh.jpg) - DFI Ultra-D (NF4 Ultra) - A64 San Diego - OCZ EL PC3200 Rev2
Vincentvega18 - 305x8=2440MHz DDR610 @ 6-3-4-2.5-1T (http://www.xtremesystems.org/forums/attachment.php?attachmentid=30571) - DFI Ultra-D (NF4 Ultra) - A64 ClawHammer - Gskill PC4800LA
Frodin - 302x8=2416MHz DDR604 @ 7-3-4-2.5-1T (http://www.xtremesystems.org/forums/attachment.php?attachmentid=36222) - DFI Ultra-D (NF4 Ultra) - A64 ClawHammer - OCZ EL PC3200 Rev2
Kenetixx - 300x10=3000MHz DDR600 @ 6-3-4-2.5-1T (http://teknetixx.com/opteron/centon300mhzopty32pi.jpg) - DFI Ultra-D SLi-mod (NF4 SLi) - A64 Venus - Centon Advanced PC3200LL
gundamit - 334x9=3006MHz DDR600 @ 8-3-4-2.5-1T (http://img25.exs.cx/img25/6775/334x9109div25438up5gv.jpg) - DFI SLI-D (NF4 SLi) - A64 Winchester - OCZ EL PC3200 Rev2
by -=Merlin=- - 334x9=3005MHz DDR600 @ 8-4-4-2.5-1T (http://hslab.pl/Merlin/334_300.jpg) - DFI NF4 Expert (NF4 Ultra) - A64 Venice - OCZ EL PC3200 Rev2 (TCCD)
Super Nade - 300x9=2700MHz DDR600 @ 10-3-4-2.5-1T (http://img110.imageshack.us/img110/7499/300mhz32mstablehighbw23ni.jpg) - DFI Ultra-D (NF4 Ultra) - A64 Venice - PDP Patriot XBLK PC3200
meateater - 300x9=2704MHz DDR600 @ 8-4-4-2.5-2T (http://www.xtremesystems.org/forums/attachment.php?attachmentid=41667) - DFI Ultra-D (NF4 Ultra) - A64 Venus - OCZ EL PC3200 Rev2
uranium - 300x9=2700MHz DDR600 @ 7-3-4-2.5-1T (http://img33.echo.cx/my.php?image=gskill300x9spawbenchmarks3se.jpg) - DFI Ultra-D (NF4 Ultra) - A64 Winchester - Gskill PC4400LE
musk - 300x9=2700MHz DDR600 @ 7-3-4-2.5-1T (http://img.photobucket.com/albums/v475/musk/numbers.jpg) - DFI Ultra-D (NF4 Ultra) - A64 Winchester - OCZ EL PC3200 Rev2
ex2cib - 300x9=2700MHz DDR600 @ 8-3-4-2.5-1T (http://www.xtremesystems.org/forums/attachment.php?attachmentid=33204) - DFI Ultra-D (NF4 Ultra) - A64 Venice - OCZ EL PC3200 Rev2 (TCC5)
mikead_99 - 300x9=2700MHz DDR600 @ 8-3-4-2.5-1T (http://mysite.verizon.net/res6otqr/sitebuildercontent/sitebuilderpictures/300x9_32M_SPi_2.5_4_3_8_3.jpg) - DFI Ultra-D (NF4 Ultra) - A64 NewCastle - OCZ EL PC3200 Rev2
arctic-k20 - 300x9=2700MHz DDR600 @ 9-3-4-2.5-1T (http://www.xtremesystems.org/forums/attachment.php?attachmentid=29869) - DFI SLI-DR (NF4 SLi) - A64 Winchester - OCZ 4200 EL Platinum
Timothy730 - 300x9=2700MHz DDR600 @ 6-4-4-2.5-2T (http://img296.imageshack.us/my.php?image=300mhz5bx.png) - DFI Ultra-D (NF4 Ultra) - A64 Venice - PDP Patriot XBLK PC3200
mad mikee - 300x9=2700MHz DDR600 @ 7-3-4-2.5-1T (http://home.comcast.net/~mikeehrlich/dfinf4/9x300.jpg) - DFI Ultra-D SLi-mod (NF4 Ultra) - A64 Winchester - Gskill PC4400LE
Thanatos - 300x9=2700MHz DDR600 @ 7-3-4-2.5-1T (http://http://www.xtremesystems.org/forums/attachment.php?attachmentid=33263) - DFI Ultra-D (NF4 Ultra) - A64 Venice - A-DATA Vitesta PC4600
winston - 375x8=3000MHz DDR600 @ 11-3-4-2.5-1T (http://img.photobucket.com/albums/v108/winston69/32mb.jpg) - DFI SLI-D (NF4 SLi) - A64 Winchester - Corsair XMS PC4400
justwOo - 300x8=2400MHz DDR600 @ 5-3-4-2.5-1T (http://i7.photobucket.com/albums/y283/justwOo/ddr600spi32mb.jpg) - DFI Ultra-D (NF4 Ultra) - A64 Winchester - OCZ EL PC3200 Rev2
KGarcia - 300x8=2400MHz DDR600 @ 7-3-4-2.5-1T (http://www.thefragginzone.com/temp/newsystem/1gbLA/1gbLA_32mbSPI_25-4-3-7.jpg) - DFI SLI-DR (NF4 SLi) - A64 Winchester - Gskill PC4800LA
4X4N - 295x9=2655MHz DDR590 @ 5-3-4-2.5-1T (http://www.xtremesystems.org/forums/attachment.php?attachmentid=32101) - DFI Ultra-D (NF4 Ultra) - A64 Venice - OCZ EL PC3200 Rev2 (TCC5)
forumer - 290x9=2613MHz DDR580 @ 10-3-4-2.5-1T (http://www.forumdeluxx.de/gallery/data/500/6834290.jpg) - ABIT AN8 Fata1lty (NF4 Ultra) - A64 Winchester - OCZ EL PC3200 Rev2
kiwi - 290x8=2320MHz DDR580 @ 6-3-4-2.5-1T (http://img107.exs.cx/img107/8271/2906yr.jpg) - DFI Ultra-D (NF4 Ultra) - A64 Winchester - OCZ EL PC3200 Rev2
crespo80 - 290x8=2320MHz DDR580 @ 5-3-4-2.5-1T (http://www.crespo80.altervista.org/cesare/tccd290.jpg) - DFI SLi-DR (NF4 SLi) - A64 Winchester - Centon PC3200LL
Digg - 289x9=2602MHz DDR578 @ 7-3-4-2.5-1T (http://mitglied.lycos.de/meinnamegehtnicht/289289pi32m.JPG) - Abit AN8 Ultra (NF4 Ultra) - A64 Winchester - Corsair TWINX1024-4400C25
THunDA - 270x10=2700MHz DDR540 @ 8-3-4-2.5-1T (http://img232.exs.cx/img232/9475/32m9gd.jpg) - DFI UT (NF3 250Gb) - A64 ClawHammer - OCZ EL PC3200 Rev2


2x256MB

TRCD=3

ausasua - 304x8=2432MHz DDR608 @ 6-3-3-2.5-1T (http://www.xtremesystems.org/forums/attachment.php?attachmentid=24792) - MSI Neo2 (NF3 Ultra) - A64 Winchester - Geil PC3200 UltraX

TRCD=4

KenLau - 353x8=2824MHz DDR706 @ 8-4-4-3.0-1T (http://www.xtremesystems.org/forums/attachment.php?attachmentid=38233) - DFI Ultra-D (NF4 Ultra) - A64 Venice - Corsair 3200XLPT Rev 1.2
uOpt - 346x7=2422MHz DDR692 @ 8-4-4-3.0-1T (http://www.cons.org/tmp/oc-screens/geil1tccd-v28_cabne-v15_clock_1.png) - DFI SLi-DR (NF4 SLi) - A64 Venus - GeIL ONE PC4800
Onepagebook - 345x9=3106MHz DDR690 @ 6-3-4-2.5-1T (http://img70.exs.cx/img70/3654/ddr690pi32m8fe.jpg) - DFI SLI-DR (NF4 SLi) - A64 FX ClawHammer - Gskill PC4800LA
masni - 340x8=2720MHz DDR680 @ 10-4-4-3.0-1T (http://img482.imageshack.us/img482/6550/340httsuperpi32mb1t2lm.jpg) - DFI Ultra-D (NF4 Ultra) - A64 Venice - A-DATA Vitesta PC4800
ben805 - 337x8=2700MHz DDR674 @ 7-3-4-2.5-1T (http://www.xtremesystems.org/forums/attachment.php?attachmentid=28526) - DFI Ultra-D (NF4 Ultra) - A64 Winchester - Gskill PC4800LA
bachus_anonym - 335x8=2680MHz DD670 @ 7-3-4-2.5-1T (http://www.xtremesystems.org/forums/attachment.php?attachmentid=26062) - ]DFI Ultra-D (NF4 Ultra) - A64 Winchester - Gskill PC4800LA
$0m#0n# - 333x8=2664MHz DD666 @ 7-3-4-2.5-1T (http://www.xtremesystems.org/forums/attachment.php?attachmentid=27179&stc=1) - DFI Ultra-D (NF4 Ultra) - A64 Winchester - A-DATA Vitesta PC4600
Martin Cracauer - 330x7=2315MHz DD660 @ 8-4-4-3.0-1T (http://www.cons.org/tmp/oc-tccd330-32m.png) - DFI SLi-DR (NF4 SLi) - A64 Venus - GeIL One S PC4800
Rubescen - 318x9=2862MHz DD636 @ 7-3-4-2.5-1T (http://www.xtremesystems.org/forums/attachment.php?attachmentid=29779) - ]DFI Ultra-D (NF4 Ultra) - A64 Venice - Gskill PC4800LA
politenessman - 311x9=2799MHz DD622 @ 7-3-4-2.5-1T (http://photos21.flickr.com/28544010_0c0b6ddb95_o.png) - ]DFI Ultra-D (NF4 Ultra) - A64 San Diego - Gskill PC4800LA
bachus_anonym - 303x9=2729MHz DDR606 @ 7-3-4-2.5-1T (http://www.xtremesystems.org/forums/attachment.php?attachmentid=24701) - MSI Neo2 (NF3 Ultra) - A64 Winchester - Gskill PC4800LA
chew* - 300x9=2700MHz DD600 @ 6-3-4-2.5-1T (http://members.cox.net/italygirl25/super%20pi.bmp) - Abit AN8 SLi (NF4 SLi) - A64 ClawHammer - Gskill PC4800LA
funkdog - 300x9=2700MHz DDR580 @ 5-3-4-2.5-1T (http://www.xtremesystems.org/forums/attachment.php?attachmentid=25913) - EPoX EP-9NDA3J (NF3 Ultra) - A64 Winchester - PDP XBL

[Napoleonic]

in my neo2, it won't boot @cl2.5 in ddr600, even if I set the voltage to 2.80v

hmmmm do a bad processor can affect the memory stability? (mine is newcastle which won't stable @2.5 ghz no matter what vcore) or it's the motherboard?

sorry if I asking questions

[quicksilverXP]

Here's some Centon 2x512MB results on their newer revisions...
http://centon.infopop.cc/evefiles/photo_albums/3/6/7/3670034113/6550034113_D6F092A99B28EEAD19949232450FEC22.JPG
http://centon.infopop.cc/evefiles/photo_albums/3/6/7/3670034113/4550034113_62BD787EDF3F48BEDF35AD3AC8F22942.JPG
http://centon.infopop.cc/evefiles/photo_albums/3/6/7/3670034113/7930000413_DA65FE115AF76A04ABDFDBC83F6C779F.JPG
http://centon.infopop.cc/evefiles/photo_albums/3/6/7/3670034113/5390010213_73E0FA9CD8427F1B49B4F56ACFB96E9B.JPG


I'll try updating the thread with more Prime results when I get home.

[JDizzle]

This seems to be the max on my Kingston HyperX.
http://img240.exs.cx/img240/15/23nm.jpg

Edit: Sorry, wrong picture :).

[bachus_anonym]

This seems to be the max on my Kingston HyperX
NOW... Here's the catch! If you think that SuperPI 1M-8M or Sandra are a sign of stability, then don't even bother showing it to us... There are many other threads more suitable for that kind of "stunts" in Xtreme Bandwidth forums.
where's SuperPi 32M ??? :rolleyes:

[bachus_anonym]

Here's some Centon 2x512MB results on their newer revisions...
this is really nice for 2x512MB, buddy :toast: ...
can you run SuperPi 32M when you get a chance, though...? with Sandra and A64Tweaker on the same screen? Just like mine ;) That would be nice...

[jumanji969]

this is really nice for 2x512MB...
can you run SuperPi 32M when you get a chance, though...? with Sandra and A64Tweaker on the same screen? Just like mine ;) That would be nice...

He showed almost an hour of prime95...

[bachus_anonym]

He showed almost an hour of prime95...
Do you know were Prime95 usually fails??? If it is to fail within one hour then it will happen either right at the beginning (1024K) or during 896K...
I don't doubt that it runs prime95 for that time... but the point is to show SuperPi 32M run with other apps. Just like in my screenshot. That's why I asked politely...

EDIT: but adding prime95 is really nice.....

[quicksilverXP]

He showed almost an hour of prime95...

I have screenies of Memtest test#5 overnight and more than 8 hours of Prime.... I'd like to think that's better than a 32m Superpi.... but I'll run that for you tonight.

[bachus_anonym]

I have screenies of Memtest test#5 overnight and more than 8 hours of Prime.... I'd like to think that's better than a 32m Superpi.... but I'll run that for you tonight.
It is better, for sure....
In other words, I wanted people to sway away from just showing SPi 1M and run a bit more of that benchamark to show off stability.... And add A64Tweaker window so we could all see what's good for that particual;r TCCD at certain speed... That's the purpose of that little "requirement"...
Don't get me wrong quicksilverXP.... I respect you as a great and honest OCer ;)

[killingspreez]

hi,
here my results:
dfi lp 250gb
3200+newcastle
g.skill la 1*512mb tccd 437

no1:
http://server2.uploadit.org/files/killingspreez-330fsb.JPG

no2:
http://server2.uploadit.org/files/killingspreez-32s.JPG

mfg

[dnavarro]

Here's my results. I'll post a Super Pi 32m when I can, but I know this is stable. I have run been gaming and Priming on this setup for days. Sorry for the big pic.

D

http://pg.photos.yahoo.com/ph/dnavarro77@sbcglobal.net/detail_hires?.dir=deb5&.dnm=8d15.jpg

[xgman]

ocz pc4200EL Plats 2x512 300HTT at 3X 2.5-4-3-7-1T

[quicksilverXP]

I added my results to my first post.... I can for sure run my Centon memory at 325Mhz 1:1 stable, I will post a 32m pic later, but I added a 16 hour Prime of it at 300 1:1 at 2.5-4-3-7, 2x512MB on dual channel, and I also posted a pic with my A64tweaker tweaks.

[bachus_anonym]

hi,
here my results:
dfi lp 250gb
3200+newcastle
g.skill la 1*512mb tccd 437

no1:
http://server2.uploadit.org/files/killingspreez-330fsb.JPG
no2:
http://server2.uploadit.org/files/killingspreez-32s.JPG

mfg
ocz pc4200EL Plats 2x512 300HTT at 3X 2.5-4-3-7-1T

SuperPi is needed here, guys.... otherwise, not interested in this kind of results :stick:

Here's my results. I'll post a Super Pi 32m when I can, but I know this is stable. I have run been gaming and Priming on this setup for days. Sorry for the big pic.
It'd be great if you could add that superpi 32M run.... thanks :thumbsup:

[szukalski]

dnavarro:: What sort of cooling are you using on that cpu?
That temp has to be wrong, unless you're using it for cooking.. ;)

[bachus_anonym]

dnavarro:: What sort of cooling are you using on that cpu?
That temp has to be wrong, unless you're using it for cooking.. ;)
don't get me wrong, but this is not a place for this type of question... If you don't have a screenoshot for us to see, then please send him PM and ask him...

[pik-ard v1.1]

szukalski, when the temp on the dfi nf4 boards goes (below 0C i think), it starts back at around 255C, so thats about -9C i think... unless its a lower value that it starts back at 255 at... :-\

[szukalski]

szukalski, when the temp on the dfi nf4 boards goes (below 0C i think), it starts back at around 255C, so thats about -9C i think... unless its a lower value that it starts back at 255 at... :-\
Cheers for that. :)
don't get me wrong, but this is not a place for this type of question... If you don't have a screenoshot for us to see, then please send him PM and ask him...
Point taken.

[KGarcia]

bachus_anonym, as per your request in the xtreme bandwidth forum...

I spent some extra time tweaking other timings to get 100% stable in 32mb SPI.

Just to let everyone know, just because it passes 20 of test 5 doesn't mean it will pass 32mb superpi. The 32mb SPI ss is worth it.

http://www.thefragginzone.com/temp/newsystem/1gbLA/1gbLA_32mbSPI_25-4-3-7.jpg

[bachus_anonym]

thanx a lot, KGarcia! that's what I'm looking for.... nice stable clocks ;)

[GRAFiZ]

Specs in sig:

http://home.comcast.net/~grafiz/primepic.jpg

http://home.comcast.net/~grafiz/benchpic.jpg

[quicksilverXP]

I can pass 32m of Superpi, but passes of Prime95 past at least 6 hours is still much more difficult, especially with our Winchesters. Just my 2 cents.

[dnavarro]

Bachus, as you requested. Super Pi 32M unpatched:

http://pg.photos.yahoo.com/ph/dnavarro77@sbcglobal.net/detail_hires?.dir=deb5&.dnm=e135.jpg



D

[bachus_anonym]

Specs in sig:
http://home.comcast.net/~grafiz/primepic.jpg
http://home.comcast.net/~grafiz/benchpic.jpg
can you add SuperPi 32M pic, plizzzzzz.... ;)
I can pass 32m of Superpi, but passes of Prime95 past at least 6 hours is still much more difficult, especially with our Winchesters. Just my 2 cents.
You're absolutely right... I though we could all have some fun and run SuperPi 32M, though... Not only for stability purpose but comparison, too.
Bachus, as you requested. Super Pi 32M unpatched:
Nice! Thanx a lot for an effort :toast: Very nice result on that SuperPi 32M, btw.

[ausasua]

geil ultraX pc3200 256*2 and neo2

2.5-3-3-6 1T 8x cpu multi. I forgot clockgen :p
http://www.xtremesystems.org/forums/attachment.php?attachmentid=24792&stc=1

http://www.xtremesystems.org/forums/attachment.php?attachmentid=24793&stc=1

[Skip]

i didn't use clockgen for this, this is straight bootup and run superpi32M. i didn't do any tweaking with A64 tweaker, but just showed it for the timings and whatnot.

this is just about the absolute max for my memory, it took me 4 superpi runs and failures and going back into the bios and changing stuff to finally get the right settings. certain things i can tighten, like TRC and TRFC i have some room to move, but basically i am at the max voltage that is still helping, and i doubt i can do anything with bypass max and max async latency.

http://www.xtremesystems.org/forums/attachment.php?attachmentid=24797&stc=1

[GRAFiZ]

bachus_anonym, here's the SuperPi 32m results:

http://home.comcast.net/~grafiz/pipic.jpg

It cut off the bottom but the numbers are, 29m 02s.

I only wish I had a better CPU, 2.5ghz is the MAX this thing will do prime stable. I can bench some at 2.6ghz, but it's not stable overall.

I sure hope those Venice cores do well when they finally come out.

[bachus_anonym]

geil ultraX pc3200 256*2 and neo2
i didn't use clockgen for this, this is straight bootup and run superpi32M. i didn't do any tweaking with A64 tweaker, but just showed it for the timings and whatnot.

this is just about the absolute max for my memory, it took me 4 superpi runs and failures and going back into the bios and changing stuff to finally get the right settings. certain things i can tighten, like TRC and TRFC i have some room to move, but basically i am at the max voltage that is still helping, and i doubt i can do anything with bypass max and max async latency.
bachus_anonym, here's the SuperPi 32m results:

It cut off the bottom but the numbers are, 29m 02s.

I only wish I had a better CPU, 2.5ghz is the MAX this thing will do prime stable. I can bench some at 2.6ghz, but it's not stable overall.

I sure hope those Venice cores do well when they finally come out.
Thanx a lot guys, I really appreciate that you decided to participate in it :toast:
I strongly encourage anyone that sees this thread and has some TTCD mems to show us what they got... Just don't forget, SuperPi 32M or bust :D

I think I might start gathering all that info in my initial post....

[THunDA]

Here is my 24-7 overclock.. Its also 10 hours prime stable and maybe longer but I dont prime for more then 8-10 hours since thats usually ok for me ..

The cpu maxes out at 2.75mhz with the same vcore but I run it here because to get the ram higher I need to loosen the timings which dont make it worth it..

Full specs are in sig.. :)

http://img232.exs.cx/img232/9475/32m9gd.jpg

[quicksilverXP]

Ok... Here's a shot of 32m Superpi, but, I forgot to scroll down to show the time at the end!... but it shows that it completed though. Here's the pic.

http://centon.infopop.cc/evefiles/photo_albums/3/6/7/3670034113/4670091413_BB8C6E253EAE13FB46E3159B0E806644.JPG

[HARDCORECLOCKER]

:D Shown here....... (http://www.xtremesystems.org/forums/showthread.php?t=53213)

:toast:

[bachus_anonym]

@THunDA & quicksilverXP

Thanx a lot guys... Those Centon sticks are doing really nice... :thumbsup:

@HARDCORECLOCKER,

aren't you forgetting something, like SuperPi 32M run :stick: :D :p: or I missed something in this thread, again...?

[Orker]

Great idea for thread...

My highest stable is

2.5-3-3-7 2.9v @250mhz
A64 3500+ @ 3500mhz 1.55v

Ocz Rev2 2x512

Its prime stable BUT it takes like 1hr to past 1 test in prime .. :confused: what would that mean?

ill post pics later....

[pik-ard v1.1]

Great idea for thread...

My highest stable is

2.5-3-3-7 2.9v @250mhz
A64 3500+ @ 3500mhz 1.55v

Ocz Rev2 2x512

Its prime stable BUT it takes like 1hr to past 1 test in prime .. :confused: what would that mean?

ill post pics later....
you mean 2500mhz, right? not sure bout the prime stuff, what settings are you choosing though?

[Orker]

you mean 2500mhz, right? not sure bout the prime stuff, what settings are you choosing though?

yeh 2500mhz :)

torture test... blend ram and cpu

[funkdog]

Right now it's 310x8 at 2.5,4,4,7 2.8vdimm 1.45vcore.

0451 3000 winnie
PDP XBL 2x256

Hoping to get 320-325 at 2.5,4,4,8ish

[yotomeczek]

Gskill @ 3,25V
DFI NF4
http://members.lycos.co.uk/yotomecze/pi%2016M%201150s.JPG

[Napoleonic]

I want to ask, tccd @275 2.5-4-4-7-1T @2.75volt is good or not? or just average? thx

[endo]

HEY....GUYS...
just try it a64 3000+ winchester with asus mobo socket 939 with sli and with value price..
but..wow...extra power man...!!!

[bachus_anonym]

@Orker, funkdog, Napoleonic and endo...

Guys, I would really appreciate if you stay on topic... No SuperPI 32M run = no post in this thread.
We're not interested in just claims that one runs at particular speed. Screenoshot of 32M run is what we're looking for. Otherwise, don't post here...

@Yotomeczek,

How about some SuperPi 32M action for us? Got any, please ?

[wampir]

Damn always this 32M , I like XS more than tweak.pl cause here nobody asks about spi 16M or 32 .......... except You ;)

I know ....rules ;)

[tictac]

nickname : forumer (not mine ;) )
ABIT AN8 Fata1lty :up:
OCZ EL
Super pi 32M = 28min 2sec :up:

Super pi 1m = 31sec
http://www.forumdeluxx.de/gallery/data/500/6834330.jpg

Super pi 32mn = 28min 2 sec
http://www.forumdeluxx.de/gallery/data/500/6834290.jpg
[/img]

[winston]

Here's my 32Mb run as you requested fella

http://img.photobucket.com/albums/v108/winston69/32mb.jpg

[bachus_anonym]

Here's my 32Mb run as you requested fella

http://img.photobucket.com/albums/v108/winston69/32mb.jpg
Nice! 375x8 DDR600 11-3-4-2.5-1T, I assume ? DFI Ultra-D ? What mems, winston ?

EDIT: Nevermind, I got it ;) "DFI NF4 SLI-D / Corsair 4400XMS"

[winston]

Nice! 375x8 DDR600 11-3-4-2.5-1T, I assume ? DFI Ultra-D ? What mems, winston ?

EDIT: Nevermind, I got it ;) "DFI NF4 SLI-D / Corsair 4400XMS"
...
;)

[khellandros66]

GSkill PC4800 F1-3200DSU2-1GBLA
Asus K8Ne-Deluxe rev1.04
Sempron 3100+
290Mhz 1:1 2.5-4-4-8 2T

I will try it in the Chaintech rig asap.

~Bob

[funkdog]

ok, school me on how to add pics.

I've upload a jpeg of the screenie to my comcast website, but it's too small to really see.

sorry I'm a bit of a noob when it comes to editing photos and such.

[funkdog]

if you can read it, this is at what I like to run.

290x9 with 1.5v on the core. nice easy temps.

http://images.snapfish.com/342%3C%3A58323232%7Ffp4%3Enu%3D3253%3E%3A%3B7%3E34 6%3EWSNRCG%3D323287%3B65392%3Anu0mrj

using gimp for windows, but I can't seem to make the image large enough to read. Sorry.

[gundamit]

OC with OCZ Plat. Rev 9/10 divider not picked up by CPUZ (http://img25.exs.cx/my.php?loc=img25&image=334x9109div25438up5gv.jpg)

BH-5 Testing (http://xtremesystems.org/forums/attachment.php?attachmentid=25759)

[DazzXP]

I've been able to get my memory to 350Mhz HTT T2 3/5/5/8 1:1 which is 100MHz overclock which is impressive. But my CPU clock speed is alot slower and have to use T2 so am sticking with 300MHz 2.5/4/3/7

[Brandybuck]

My gskill 2x256mb pc4800 la with 323fsb 2.5-4-4-8 1T stable... :toast:


http://img163.exs.cx/img163/5167/16vq.jpg

[Hanu]

Here is my settings. Only 16M... You know...Tweak.pl ranking rules :rolleyes: I promise to make 32M :D

http://picserver.mirror.twistspace.com/img.php?/2UN21383REOS/9962L47RT4GD/JPEG/1109419181//r893

[bachus_anonym]

@ funkdog
Unfortunately, this is not gonna cut it :( and not because screenshot is small. you need to show us whole window (progress) as everybody else does. not only the result, which (don't get me wrong here) can be manipulated in Original SuperPi by manually editing results.txt.

@khellandros66, DazzXP, Brandybuck...

Guys, please read the first post. You need screenshot of SuperPi 32M if you decided to post here. We're not interested in anything else... Sorry

@Hanu

Hey, Nice of you to drop by ;) But it would be great if you could replace that with SuperPi 32M instead ;)

@gundamit... how did you manage to get exact same time @ 250 5-2-2-2.0 and 300 8-3-4-2.5 :) ???

[bachus_anonym]

Allright...

Little update on my Gskill 2x256MB PC4800LA testing:

328x9=2627MHz DDR656 7-3-4-2.5-1T 3v

Still working on my 2x512MB Gskill PC4400LE... Got some issues I need to resolve... Last time I was able to run 32M @ 315x8 7-3-4-2.5-1T... No screenie though :(

[funkdog]

Here I am at 290x9 0451 3000 winnie

http://images.snapfish.com/342%3C%3B%3A9523232%7Ffp3%3B%3Dot%3E2344%3D%3B%3A8 %3D437%3DXROQDF%3E232378%3A%3A356%3B%3Bot1lsi

how do you guys do the thumbnail thing, don't like it so small.

Nice 328 on the G.Skill, that's some rockin stuff... can only do 312 on my PDP, but the pi scores are lower.

[bachus_anonym]

Here I am at 290x9 0451 3000 winnie

http://images.snapfish.com/342%3C%3B%3A9523232%7Ffp3%3B%3Dot%3E2344%3D%3B%3A8 %3D437%3DXROQDF%3E232378%3A%3A356%3B%3Bot1lsi

how do you guys do the thumbnail thing, don't like it so small.

Nice 328 on the G.Skill, that's some rockin stuff... can only do 312 on my PDP, but the pi scores are lower.
that's better ;) Thanx

[bachus_anonym]

one more thing, though... what memory exactly is that and what mobo ???

[funkdog]

I updated my signature... gonna go to my highest stable at 1:1 and redo pi

[bachus_anonym]

Damn, funkdog... I knew it, that 27m27s is too good to be true @ 290x9 5-3-4-2.5-1T :D
That SuperPI 32M doesn't show last line... So it's more like 28m30s :)

Uff... :)

[funkdog]

yeah, my bad it's 28m28s. highest fsb it will take 1:1 is 312x9 but I need +.35v on the core and my cheapy watercooler won't handle the heat well.

right now I clocked it down to 280x9 for everyday use.

When I push the fsb to 330x8 with a 166 divider I can get in to windows, but again it needs serious voltage increase.

280x9 I only need +.1v and my pi times aren't much slower.

Seems the limit to this core is around 2.85ghz.

[funkdog]

Newest 32m pi

:toast:

[saaya]

http://www.xtremesystems.org/forums/attachment.php?attachmentid=25950&stc=1

stock heatsink 60mm 35cfm papst fan and 15°C cool german air :D

2x256mb bh5 2-2-2 but at 1/2 divider since im still maxing out the cpu speed and dont want it to limit me, will let you know how it does in 1:1 later :)

[furyfax]

I'm just wundering what bios you guys are running on the Dfi nf4 mobo? I got the last official bios dated 25th of january. Is this the best bios or do you guys have a better one?

This is my OC:

Amd 64 3000+ CBBFD 0437 @315x8
DFI LP NF4 Ultra
2x512MB Corsair PC4400 (TCCD)@630MHz 2.5-5-4-10 2.9V
MSI X800XT
Watercooling on the CPU, how much voltage can I put on the CPU ? Currently at 1.5V

[saaya]

several people reported using the bios 2/18

im still on the stock bios.

[bachus_anonym]

My new result with 2x256MB Gskill PC4800LA.

It's taken straight from another thread (http://www.xtremesystems.org/forums/showthread.php?t=55093).
I also added Onepagebook's awesome result of DDR670 6-3-4-2.5-1T with 2x256MB Gskill PC4800LA :thumbsup:

SuperPI 32M @ 330x8=2640MHz DDR660 7-3-4-2.5-1T

[HARDCORECLOCKER]

My new result with 2x256MB Gskill PC4800LA.

It's taken straight from another thread (http://www.xtremesystems.org/forums/showthread.php?t=55093).
I also added Onepagebook's awesome result of DDR670 6-3-4-2.5-1T with 2x256MB Gskill PC4800LA :thumbsup:

SuperPI 32M @ 330x8=2640MHz DDR660 7-3-4-2.5-1T

:D Hey bachus - all the luck with You but please recognize OPB is unbeatable, if You do one step forward he will do two...... :p:

:toast:

[bachus_anonym]

SuperPI 32M @ 335x8=2680MHz DDR660 7-3-4-2.5-1T (Click image for full-size version)
CPU-Z Verified #5503 (http://valid.x86-secret.com/show_oc?id=5503)

http://www.xtremesystems.org/forums/attachment.php?attachmentid=26025&stc=1 (http://www.xtremesystems.org/forums/attachment.php?attachmentid=26062&stc=1)

[gundamit]

@gundamit... how did you manage to get exact same time @ 250 5-2-2-2.0 and 300 8-3-4-2.5 :) ??? I was out to prove my Mushkin at the same CPU speed would beat the TCCD but there doesn't seem to be any difference. :rolleyes:

I just got some TwinMos SP 2x512mb and they don't seem to have a problem with 3.5v! I did a burn in last night and I'm just now getting ready to take the SP to 263 (7:10) and see if it can knock a few more seconds off. Stayed tuned.

[musk]

Well here is my 2x512 OCZ rev2

http://img.photobucket.com/albums/v475/musk/numbers.jpg

sorry if its too big.

Also my a64 tweak readings are totally screwy. Any ideas?

musk

[mad mikee]

CPUZ id = 8010
http://home.comcast.net/~mikeehrlich/dfinf4/9x300.jpg

Some of the timings are slow since I am d2oling again :D
Gotta get some time to make a rad-box since just opening my case drops Cpu temps 2 degrees, been up to 306 playing w/it so far.
Extra info available @ DFI street :D

[bachus_anonym]

@musk

What mobo is that? DFI Ultra-D ?

@mad mike

Can you add here more details about your setup - mobo, RAM ;)

[Giasan]

This is mine liquid cooled:

http://img166.exs.cx/img166/2583/misto5ad.th.jpg (http://img166.exs.cx/my.php?loc=img166&image=misto5ad.jpg)


DFI NF3 250Gb
2x512 OCZ Platinum Rev.2

[musk]

[QUOTE=bachus_anonym]@musk

What mobo is that? DFI Ultra-D ?

QUOTE]

Bachus,

It is the DFI Ultra-D Bios 310
vdimm is 2.77v actual

You were right about 32M, way harder to get stable than memtest #5

musk

[waiho2k1]

I've got two pairs of TCCDs, one is ADATA DDR566 512MB X 2, the other pair is Gskill PC4400 LE 1GB kit. The results on my 2 MSI K8N NEO2 Platinum are:
On board A, ADATA got 245MHz @ 3-4-4-8, 2.8V; Gskill got 260MHz @ 2.5-3-3-10, 2.75V
On board B, ADATA got 270MHz @ 2.5-4-4-8, 2.8V; Gskill got 320MHz @ 2.5-4-3-8, 2.8V

[mikead_99]

2 sets of TCCD myself, results on DFI NF4 Ultra-D:

OCZ 4200EL Plat, 2x512: 270 2.5-3-3-7 with 2.8VDimm
GSkill LA's, 2x512: 290 2.5-3-3-7, 2.7VDimm. Couldn't quite hit 300 with those timings. I did Prime95 them at 305 MHz 2.5-4-3-7 2.9VDimm, just to break the DDR600 stable mark, but I run them at 280 2.5-3-3-7 and pretty good lower level timings 24/7.

[bachus_anonym]

Three more entries addded :thumbsup:

Thanks a lot guys :toast:

Keep them coming, dudes :cool:


@ Giasan, waiho2k1 and mikead_99...

I will be more than happy to add your results as soon as you get a chance to run SuperPi 32M for me, please. Just a statement is not enough :(

[mikead_99]

@ Giasan, waiho2k1 and mikead_99...

I will be more than happy to add your results as soon as you get a chance to run SuperPi 32M for me, please. Just a statement is not enough :(

lol, whoops, this is that thread. :slap: I went ahead and just threw numbers up there after not looking at the first page again in a while. (I'd seen what you were asking for a while ago and didn't realize this was that post) I'll get some 32M screenies for you tonight. I started playing with the OCZ set again and have some different numbers for them anyway. Never tried them before with this cpu (claw 3500+), seems they'll run pretty close to my LA's after all.

[kiwi]

Well, I have some old OCZ Rev2 TCCD sticks which I bought a long time ago and decided to post some results. Unfortunately, I can't get 300htt superPI 32M stable. My crappy cpu is not prime stable above 2.55Ghz either.
PI time might be a bit slow cause I did some background stuff :)

http://img107.exs.cx/img107/8271/2906yr.jpg

[mikead_99]

OK, 600 anyway on the OCZ 4200EL's. I'll get back to the GSkill's at some point, but they didn't do too much better. Both pairs went into the 290's at 2.5-3-3, both pairs needed Max Asynch => 8ns in the 285 range, both top out in the low 300's and both with plenty of room to slacken up tref, trc, trfc, trtw, and idle cycle, but none of that helps. They both act so similar I'm not sure they are out of room or if my mobo/cpu is. I want to play with this new DFI bios to see how my VX are doing now, I will post some LA results whenever I get back to them though.

http://mysite.verizon.net/res6otqr/sitebuildercontent/sitebuilderpictures/300x9_32M_SPi_2.5_4_3_8_3.jpg

[anulu]

my 2xDDR566 A-DATA TCCD's running rock stable @DDR606, but only @ 3-4-4-8-2T, and i don't know, why :confused: i've tried many things VDIMM from 2,7V to 3,0V, but they don't like it. the best perf i've got is DDR606 with VDIMM 2,7V.

does anyone have ideas what can be the problem? i have an ASUS A8N-SLI Mobo with the 1002-03 beta BIOS. that's the latest (25/01/2005) what i've found. tips can be send via e-mail also for me :D thanks! :)

with T1 command rate they runs only @DDR480 :confused:

[Opteron96]

Hi, here is my 32MB super pi.
320MHz 2x512 2.5-4-3-7 1T 3.0V
System info (http://xs.to/xs.php?h=xs22&d=05130&f=320_2561_32MB_red.JPG)

[ben805]

Gskill PC4800 512LA 2x256MB 337.5 @2.5-4-3-7 1T SuperPI 32M stable :D :D

[NiCKE^]

http://home.no/nickeh/2.55ghz.255fsb.1.5-2-2-6.solid2.jpg
That's my best. 2x512 Twinmos SP UTT (CH-5) 1.5-2-2-6 3.4v 255mhz and 2.55ghz.
And yeah it's very stable, folded at the same time I was running SP2004 ;)

[forumer]

nickname : forumer (not mine ;) )
ABIT AN8 Fata1lty :up:
OCZ EL
Super pi 32M = 28min 2sec :up:

Super pi 1m = 31sec
http://www.forumdeluxx.de/gallery/data/500/6834330.jpg

Super pi 32mn = 28min 2 sec
http://www.forumdeluxx.de/gallery/data/500/6834290.jpg
[/img]

:fact:

Abit Fatal1ty AN8
2x512 MB OCZ PC4200 EL PE

http://www.nethands.de/pys/show.php4?user=forumer_h2o

289@1T
http://www.mitglied.lycos.de/forumer/pics/nethands/h2o/pc4200/289.jpg

300@2T
http://www.mitglied.lycos.de/forumer/pics/nethands/h2o/pc4200/300.jpg

[bachus_anonym]

I have updated the list :)

@ NiCKE^
Actually, that thread is about TCCD only, so far... Maybe I should add some BH-5 action later...

@forumer
I knew that Tictac posted in someone else's name. That's why I put a question mark next to his nickname :)

@Saaya
Thanx for moving that thread over to more appropriate :toast:

@ALL
Keep 'em coming guys, don't be shy... :thumbsup:

[RyderOCZ]

Here you go Bachus, best I could do :)

DFI Ultra-D with SLI Mod
OCZ PC3200 Plat Rev 2
OCZ Modstream 520
MSI 6600GT x 2

http://dragoncc.sytes.net/pics/DFI310TCCDXS.png

[FlyingHamster]

OK, 600 anyway on the OCZ 4200EL's. I'll get back to the GSkill's at some point, but they didn't do too much better. Both pairs went into the 290's at 2.5-3-3, both pairs needed Max Asynch => 8ns in the 285 range, both top out in the low 300's and both with plenty of room to slacken up tref, trc, trfc, trtw, and idle cycle, but none of that helps. They both act so similar I'm not sure they are out of room or if my mobo/cpu is. I want to play with this new DFI bios to see how my VX are doing now, I will post some LA results whenever I get back to them though.

man that is a freakin nice NC u got there mike. whats the stepping? is it prime stable too??

[mikead_99]

man that is a freakin nice NC u got there mike. whats the stepping? is it prime stable too??

Not bad, but not so nice either considering it was on phase. It's actually a CAAZC claw, best I can get out of it on the LS is 2.8GHz Prime stable. Good memory controller in it though. :) Got a 3500+ Venice now I'm working with to get my LA's updated in this thread. 3.05 GHz Prime stable with that one on phase, looks like a little higher for 32M SuperPi.

[FlyingHamster]

very nice! awaiting results with those LA's ;)

[bachus_anonym]

Here you go Bachus, best I could do :)

DFI Ultra-D with SLI Mod
OCZ PC3200 Plat Rev 2
OCZ Modstream 520
MSI 6600GT x 2

http://dragoncc.sytes.net/pics/DFI310TCCDXS.png

Thanx a lot, RyderOCZ! I see that there's a lot of really nice Rev2 results! Cool :thumbsup:

[mikead_99]

Well, this seems to be as far as my LA's want to go with 2.5-4-3. I may end up with an update later. I've avoided dropping to 2.5-4-4 but I'm going to go ahead and do that now to see if they'll stretch further for me.

@ bachus_anonym: This goes a little ways towards answering your call for Venice stability testing. I'll post up my best P95 in the Venice thread in a little bit. So far 3.05, but I want to take one more crack at 3.1GHz before I call it quits. 2.5-4-4 play first though.

edit to add: Just under 2.8VDimm to get this. ;)

http://mysite.verizon.net/res6otqr/sitebuildercontent/sitebuilderpictures/SPi_32M_24_14.078.jpg

[bachus_anonym]

I have updated the list with first A64 Venice result! Thanx a buch to mikead_99 for that :toast:

If anyone else has any nice screenies for me then don;t be shy and post 'em here right away!
Just don't forget - SuperPi 32M or BUST!!! :toast:

[FlyingHamster]

hey bachus, do u know the average vdimm ppl are using to hit 300fsb with their TCCD? im using a neo2 (no volt mods), so the most I can get outta the bios is 2.85v, and it doesnt seem like thats enough for 300fsb. :(

edit: well I guess theres no real "average". i see u used 2.7vdimm, and others used 3.0v, others 3.1, etc

my 440 2x256 LA error out in memtest at 300 with 2.85v. guess i just didnt get a good pair :(

[SainT]

http://img154.echo.cx/img154/598/310fsb254478m8kk.jpg

A-Data Vitesta....2*512/566Tccd

Edit:32m is too long :D

[bachus_anonym]

http://img154.echo.cx/img154/598/310fsb254478m8kk.jpg

A-Data Vitesta....2*512/566Tccd

Edit:32m is too long :D
Sorry, bro :( Not interested in 8M calculations here. 32M stability is much harder to achieve than 8M, and that's the whole point ;)
Run 32M please, and I'll be more than happy to add your entry to the list :)

[Soulburner]

Does anyone think 275 2.5-3-3-6 4x512mb is possible? On a San Diego + DFI rig...

[dippyskoodlez]

http://img224.echo.cx/img224/9535/ddr6005zb.jpg

http://img121.echo.cx/img121/821/ddr60028ks.jpg

512mb Mushkin black level II rev 2--- $100 @ newegg.

:banana:

3v

CPC on, interleaving on :) This winchester sucks though... no 2400mhz 1.6vcore :(

never has, never will... :(

[FlyingHamster]

looks like some nice ram dippy. got anything more than 6 min in memtest and cpu-z screenies though?

[dippyskoodlez]

looks like some nice ram dippy. got anything more than 6 min in memtest and cpu-z screenies though?

=/ been trying for the last half hour to get this stuff to boot 2-2-2-5.. It wont :(

I had memtest running for about 5 minutes afterwards, but was too lazy to take another pic.

This stuff wont boot 2-2-2 no matter what i give it.. stock everything, 2-2-2-6 just wont happen. :mad:

[SainT]

Sorry, bro :( Not interested in 8M calculations here. 32M stability is much harder to achieve than 8M, and that's the whole point ;)
Run 32M please, and I'll be more than happy to add your entry to the list :)
oke bro ;) i'll do it 32m when i am free :)

[arctic-k20]

here is my new ocz 4200el plat chugging along so far.... i think if my memory controller was just a little bit stronger i could have gotten 2.5-3-3-x but I just couldnt get 32m stable with trcd-3...

[bachus_anonym]

here is my new ocz 4200el plat chugging along so far.... i think if my memory controller was just a little bit stronger i could have gotten 2.5-3-3-x but I just couldnt get 32m stable with trcd-3...
Added... Thanx a lot :toast:

[gundamit]

here is my new ocz 4200el plat chugging along so far.... i think if my memory controller was just a little bit stronger i could have gotten 2.5-3-3-x but I just couldnt get 32m stable with trcd-3... Glad to see your long VX/bios/memory controller nightmare is over. They'll run cool and provide plenty of bandwidth and a lot less grief. :toast:

[arctic-k20]

thanks gundamit......im glad as well....its nice to be able to turn off the computer and know it will turn back on every time now ;)

[crespo80]

this is 7+ hours goldmemory 6.64 stable (and prime95 of course) and is my daily use...

290MHz 2,5-4-3-5 1T only 2.6v with no active cooling on ram

http://www.crespo80.altervista.org/cesare/tccd290.jpg

[FlyingHamster]

what kind of ram?

[crespo80]

what kind of ram?
it's written in the sandra screenshot:
centon advanced (very very good ram)
:)

EDIT:
chip Samsung TCCD-507
pcb Brain Power 808



but this goal was achieved by setting all the parameters in BIOS and testing them with the hardest memory test program, goldmemory 6.64.
If i clock in Win with clockgen and test only with superpi 32mb, i can achieve higher frequencies...
later i'll try with active cooling on ram (a simple fan), because now this is the limit, they aren't 100% stable even if i raise freq by only 2Mhz...
and increasing voltage to 2,7v has no effect, resulting in little worse results
:eek:

[bachus_anonym]

What's the board? DFI Ultra-D or SLi? Or something else?

Yes, GoldMemory 6.64 is a really nice tester, seems much better than Memtest1.55 and on par with "Memtest for Windows" :)

Also, is that Centon PC3200 Gemini LL ???

[CTKP]

3700+ San Diego
DFI NF4 Ultra
OCZ 3200EL Platinum Rev.2 at 2.7v
Powerstream 600

http://img242.echo.cx/img242/9388/9x305pi1m3kk.jpg

http://img242.echo.cx/img242/9219/8x305pi32m4kh.jpg

Will try to get a 9x305 SPi 32m, still working with this SD.

[crespo80]

What's the board? DFI Ultra-D or SLi? Or something else?

Yes, GoldMemory 6.64 is a really nice tester, seems much better than Memtest1.55 and on par with "Memtest for Windows" :)

Also, is that Centon PC3200 Gemini LL ???
the board is a DFI NF4 SLI-DR, now i have my config in sign ;)
the centon stick are "OEM", not sold in pair, I brought them from computersma of this forum.
They have Samsung TCCD-507 chips and Brain Power 808 pcb

I made several tests with practically all of the parameters in the BIOS, to find best settings for my ram. At a first time I worked so:
change a single parameter in BIOS and test with 10 runs of memtest #5
look how many errors it reports and choose the option with less errors
But when i repeated the tests with the same identical BIOS settings I obtained very different results (like 200errors VS 100 with same settings!!!), so I left memtest ang gone for goldemmory.
With this tester i obtained very precise results, and if I repeat twice a test with the same BIOS settings, the max difference, in terms of errors, is for example 205 VS 200.

So, for every single parameter in BIOS I made a full goldmemory pass (about 35min) and choosed the option with less errors.

Some settings now are different from the screen i posted (like the tRAS from 5 to 7 and the tREF from 3072 to 2048)

At a first moment i followed the guide from KAKAKOTO and ONEPAGEBOOK but then i went on my own

[omga14]

219x12 on some old ch-5. can do 235mhz with the same timings but the cpu doesn't seem to like it right now. still doing some tweaking. hope to be back with air cooled 2.7ghz+. here's the screenie.
http://img239.echo.cx/img239/9707/w3dmark01everest0qe.th.jpg (http://img239.echo.cx/my.php?image=w3dmark01everest0qe.jpg)

[omga14]

this was with a DFI UT 250gb and a 3400+(NC) week 0503

[uranium]

Here's my GSkill LE at 300. Not 2.5 3 3 7 unfortunately, but other timings are quite tight. Also stable to memtest for Windows for 8 hours (at which point I decided it was stable ;) )

http://img33.echo.cx/img33/5437/gskill300x9spawbenchmarks3se.th.jpg (http://img33.echo.cx/my.php?image=gskill300x9spawbenchmarks3se.jpg)

[CTKP]

this was with a DFI UT 250gb and a 3400+(NC) week 0503
Uh, this is for TCCD only :stick:

[bachus_anonym]

@crespo, CTKP and uranium

Thanks guys :toast: Listing updated!

Also, CTKP to be the first one here to add his San Diego to the list :thumbsup:

@omga14,

yeah, sorry bro! at the moment we're gathering info on TCCD OCs only ;) but, maybe it's time to start another thread then... Hmmm :)

[TheMeatFrog]

DDR632 9x316...32M may be a little slow cause I was surfing the web while it was running :p:
http://img226.echo.cx/img226/7934/mem4ez.jpg (http://www.imageshack.us)

Forgot to bring up voltages for the first screen shot :slap:
http://img226.echo.cx/img226/9749/volt1gf.jpg (http://www.imageshack.us)

SuperPI 1M just for kicks :)
http://img67.echo.cx/img67/6899/untitled2copy9pp.jpg (http://www.imageshack.us)

[bachus_anonym]

@Rubescen

I just added your 32M that I found here (http://www.xtremesystems.org/forums/showpost.php?p=846083&postcount=31).
I was looking for some good TCCD clocks and tripped over your post. I hope you don't mind. If you get a better one then just post it here, please ;)

[hangLewZ]

Anyone tried these? Are they tccd? :sofa: Check em out http://www.ocztechnology.com/products/memory/ocz_el_ddr_pc_5000_dual_channel_platinum_dfi_nf4_s pecial

[THunDA]

Anyone tried these? Are they tccd? :sofa: Check em out http://www.ocztechnology.com/products/memory/ocz_el_ddr_pc_5000_dual_channel_platinum_dfi_nf4_s pecial

Yup..TCCD

[EMC2]

:poke:Xtreme Pi Freak :rofl: :ROTF:
Sorry, couldn't resist...first time I noticed that little funny :p: In honor of your "title", may have something for ya this weekend bro ;)

[bachus_anonym]

:lol: Yeah! Since I have started to be known for bugging everyone I can for 16M/32M Pi, I bet they whisper that behind my back :lol:

You got some TCCD results for me? Sweet! Don't forget about BH-5/BH-6/UTT thread too, while you're on it :D You've been stockpiling those SpeedPremiums and Blues for quite a while now :stick: :p:

[justwOo]

I get my OCZ 3200 Plat Rev2's on monday, i'll definetly let you know how it goes :D

[dippyskoodlez]

Getting more TCCD in an hour. Along with a venice to play with. Results then :D

[eraser]

http://img140.echo.cx/img140/1488/ddr6203rg.th.jpg (http://img140.echo.cx/my.php?image=ddr6203rg.jpg)

TwinmosTwisterPro3200 TCCD 2x512mb :woot:

This is max SuperPi 32m stable Cpu Overclock with my 0437 winchester:
http://img140.echo.cx/img140/3135/2610stable6bv.th.jpg (http://img140.echo.cx/my.php?image=2610stable6bv.jpg)

300mhz 2.5-3-3-7-1T is memtest & 3dstable but not SPi 32m.

http://img140.echo.cx/img140/4697/8x300prime3bh.th.jpg (http://img140.echo.cx/my.php?image=8x300prime3bh.jpg)

[Flu1]

hi,
I would know what's the max memtest of OPB and others who is in 2*512 and at 2.5-3-3-5?
because I have a kit of centon pc3200LL and the first stick is ok at 315 and the second at 310 each one in single. what could it make?
thanks.

[XiN]

DFI nF4 Ultra-D / Bios 310 / air cooling / Winchester 3000+ (CBBID)

300x8 / 2x512 MB G.Skill 4400LE (TCCD440)

DDR600 8-4-4-2.5-1T 2.8V

- Spi 32MB stable
- 6h Gold Memory normal test stable
- 10h memtest86+ stable
- Prime small fft / in large stable
- S&M cpu/memory test stable

Screen:

http://img39.echo.cx/img39/2678/300x8spi32mb8wh.th.jpg (http://img39.echo.cx/my.php?image=300x8spi32mb8wh.jpg)

http://img39.echo.cx/img39/9008/300x8prime23to.th.jpg (http://img39.echo.cx/my.php?image=300x8prime23to.jpg)

http://img39.echo.cx/img39/4015/300x8prime2gs.th.jpg (http://img39.echo.cx/my.php?image=300x8prime2gs.jpg)

http://img39.echo.cx/img39/3743/300sandra3ih.th.jpg (http://img39.echo.cx/my.php?image=300sandra3ih.jpg)

[arctic-k20]

flu1: memtest dos is a lot less stressful than other testing programs because it ONLY tests your ram.....you will be able to memtest in dos a lot higher than you will be able to run windows stable !!

if you can do superpi32m @ 310 2.5-3-3-x and run windows memtest you will have the best 2 sticks of ram i have seen on any forum in a long time !!!

[Concorde Rules]

G-Skill PC4400 'LE' 440 Chips on BP PCB! @ 2.5-3-3-7 2ith 2.9V + 0.03V (2.96V BIOS)..

http://www.thunder-keep.co.uk/site/hosted/sandeigo/277x10.jpg

This is NOT the best speed achived, I have memtested at 285Mhz @ 2.5-3-3-7 @ 2.96V but I am running the CPU in.

With 3V I *Should* get 290 stable!

Concorde

[arctic-k20]

not to be a stickler but you need to pass superpi32 to join in the fun!!
NOW... Here's the catch! If you think that SuperPI 1M-8M or Sandra are a sign of stability, then don't even bother showing it to us... There are many other threads more suitable for that kind of "stunts" in Xtreme Bandwidth forums.

So, for instance, if you have a set of TCCD that breaks DDR600 barrier @ 7-3-3-2.5-1T w/ SPi 32M and min. x7 multiplier then don't hesistate and bring it here... It would be very appreciated if you could add Sandra and A64Tweaker screens at same exact settings that forementioned SuperPi run was made... Just to give others an idea how to make theirs TCCD perform stable at higher speeds

[Concorde Rules]

Oh come now, 4 hours of BOINC not enough!

Got tests coming up, so give me a week to 32mb at my highest 2.5-3-3-7 speed.

Concorde

[bachus_anonym]

Oh come now, 4 hours of BOINC not enough!

Got tests coming up, so give me a week to 32mb at my highest 2.5-3-3-7 speed.

Concorde
@Concorde Rules

Just like arctic-k20 said above...

SuperPi 32M only in this thread, please. Not interested in anything else ;)

@eraser

Is that DFI NF4 board?

@XiN

I'm pretty sure you can take those sticks higher (for Spi 32M run) if it's Pime95 stable @ same speed as Spi 32 you posted ;)

Thanks guys :toast: The list is getting longer. Waiting for more :thumbsup:

[Mr.President]

i got 325 stable with my winni @ 2,5 4 3 6
with the venice my mem only does 310 @ 2,4 4 3 6
both @ 2,9 v......
i will take an stupid screen @ only 310 later when my water cooling arrives

[mad mikee]

CPUZ id = 8010

Some of the timings are slow since I am d2oling again :D
Gotta get some time to make a rad-box since just opening my case drops Cpu temps 2 degrees, been up to 306 playing w/it so far.
Extra info available @ DFI street :D

Just for Xtra Info: did the same, (dif dfi (refurb.)board and cooling in bsmt pcp510 20pin, prepping this one for my wifes puter :hehe: ) replace GBLE w/ GBLA
Will try for more b4 going through the screenie hell again.

[eraser]

@eraser

Is that DFI NF4 board?


Yes its DFI NF4 UltraD :toast:

[XiN]

@XiN

I'm pretty sure you can take those sticks higher (for Spi 32M run) if it's Pime95 stable @ same speed as Spi 32 you posted ;)

Yes they are prime stable at same speed ... but unfortunely memory controller (my 3000+ is a CBBID :\) is bad and infact I can't go above 300 ... I have tested many configurations at 305/310/312/315 (with 2.8V/2.9V/3.0V) but it doesn't finish spi 32MB :(


UPDATE 1:

Uhm, a little improvement

DDR600 7-3-4-2.5-1T

http://img122.echo.cx/img122/1262/30025437spi32mb1kv.th.jpg (http://img122.echo.cx/my.php?image=30025437spi32mb1kv.jpg)


UPDATE 2:

With bios 510-3 I have broken 300 mhz barrier :toast:

310x7 | Bios 510-3 | Vdram: 2.83V

DDR 620 8-4-4-2.5-1T

http://img178.echo.cx/img178/2446/ddr62025448spi32mb4kn.th.jpg (http://img178.echo.cx/my.php?image=ddr62025448spi32mb4kn.jpg)

bachus_anonym, you can edit my result :D

edited to combine three consecutive posts - bachus_anonym

[Vincentvega18]

Got to 305 100% stable, going higher as we speak but its getting tough. dfi nf4 ultra-d 310 bios 2.91 volts, i think the chips are getting hot, as the only thing blowing on them is my xp-90
Edit: forgot to say, g.skill pc4800 2*512 with 440 chips.

[XiN]

Excuse me for too many posts, but I have done another personal "record"

DFI nF4 Ultra-D | Air cooling | bios 510-3 | 315x7

DDR630 7-4-4-2.5-1T SuperPi 32M stable :toast:

http://img273.echo.cx/img273/3122/ddr630744259pe.th.jpg (http://img273.echo.cx/my.php?image=ddr630744259pe.jpg)

[cupra]

that is my gskill la 440 chips, sli-dr and fx55 0442

320x9 - 2.5-4-3-7 - and its can pass the tests but is not 24/7 stable.
305x9 - 2.5.4.-3-7 - is 24/7 for me :)

http://valid.x86-secret.com/show_oc?id=18852

[justwOo]

Seems as though it might be TCC5, but is that ok? :P
DDR 600 @ 2.5-4-3-5 x8
I'll try for my 300x9 once I get my water :P

[bachus_anonym]

@cupra,

I'm sorry man, but SuperPi 32M is neccesary ;)

@justwOo

TCC5 is fine too as long as I see 32M ;)

[justwOo]

Sorry forgot to take a Cpu-Z But

DDR600 2.5-4-3-5 300x8

http://i7.photobucket.com/albums/y283/justwOo/ddr600spi32mb.jpg

[Opteron96]

Not prime stable. But manage OCCT:D
OCCT is nice for a quick test.

http://i7.photobucket.com/albums/y292/Opteron96/310_32MBpi_occt.png

[TheMeatFrog]

Since I sold these bad boys to Major this week I figured why not give them one last push to see if I could still reach 316MHz and maybe a little more. :D So I pulled out everything in my bag of tricks and this resulted in a new personal best of 321MHz :slobber: that's DDR642 for anyone a little slow. ;) It was about an 6 hour straight tweak fest but I'm happy with the results. I'm almost sad to see these guys go but atleast I know they're going to a good home. Hope you enjoy Major! :p:
http://img274.echo.cx/img274/779/ram3210ee.jpg (http://www.imageshack.us)

[Ziku]

G.Skill 4400 LE 2x512MB (437 chips) http://picserver.student.utwente.nl/view_image.php/4Y21G2ABL258/picserver.gif

[[XC] 4X4N]

These are the new OCZ Plat. Rev 2 TCC5. After weeks of trying all different bios and settings, this is the best I can do. Using 5/10-2 bios

[sponge bob]

i have 2x512 mb adata vitesta ddr566 and they cant run over 275 (2,8v) stable i have used 2,5-4-3-7 ,3-4-4-8 and same results, cpu is windy 3000 0450 2,6ghz@1,55 prime stable mobo: gigabyte nf4-4x GA-K8NF-9 s939
any help or those sticks are so bad?

[TheMeatFrog]

Please update my results in the first post with my new results from a few post up thx! :toast:

[bachus_anonym]

@Opteron96

Your recent result is just unreal! 32M @ 310 6-3-3-2.5-1T with 2x512MB is something, that I'm not sure anyone has ever done before. Don't get me wrong, but I need to think about this result a bit. I might need to come up with some sort of verification for that. Don't take it personal, OK?

Other than that, list is UPDATED!

[amrgb]

Unbelievable how can be only 3 entries in the 2x512MB - Trcd 3 section. This is my small contribution to this section. I will update it since I know I can do more but have no pics atm.

Rig:
- 2x512 GSkill 4400 LE 440 TCCD chips (actively cooled)
- winchester 3500+ CBBID 0451 (cooled by XP120+190CFM Delta)
- DFI NF4 Ultra-D

http://img282.echo.cx/img282/3010/27492hn.th.jpg (http://img282.echo.cx/my.php?image=27492hn.jpg)

[bachus_anonym]

@amrgb

If you don't mind, I'll wait for next screenies. What I need to be on the screenshot are: SuperPi window, A64Tweaker and 2 instances of CPU-Z (CPU and Memory Tabs). On both CPU-Z windows, version (e.g 1.28.6 or 1.29) should be visible. Thanks!

[amrgb]

OK, just fine for me (and you save some work :) )

I guess that I have to increase my screen resolution in order to get all that in one screenshot :p:

I will try my best for the first place. 301 @ 2.5-3-3-7 (keep on dreaming, it pays no tax... yet :D )

[Eldonko]

Here are some TCC5 results, I think I got everything I need in the SS, if not let me know and I can rerun the 32M. Using BIOS 0510-3 and the gear in my sig.

DDR 614 @ 2.5-4-3-5, 3.04v (DMM).

This is 24/7 stable. I can squeeze a few more Mhz if I loosen timings more but its not worth the performance loss IMO.

http://members.shaw.ca/Eldonko/306-2.JPG

[[XC] 4X4N]

I don't see many posts with trcd of 3, so I thought I would post one. 10x270 2.5-3-3-8. I can run 3dmark, pcmark, sandra, up to 8m pass of super-pi 10x280 2.5-3-3-8, just can't get 32m to pass.

[amrgb]

@bachus_anonym
You can now create an entry with my score. I think that I could do a little better, but it will take me much more effort than to get this one.

Score: 2.5-3-3-6@296 1T 1:1 2.9v
Memory: G.Skill 4400 LE, TCCD 440
CPU: 3500 Whinchester @ 2367 (296x8)
Board: DFI NF4 Ultra-D

http://img39.echo.cx/img39/226/29621dh.th.jpg (http://img39.echo.cx/my.php?image=29621dh.jpg)

PS: I can put this sticks to work (flawlessly) with CAS 1.5 @ 200-205 2.6v. Is this a common result for TCCD? I thought that TCCD couldn't do CAS 1.5 :p:

EDIT: bios 510-2

[Sgt_Strider]

I was hoping more of you would list the BIOS revision that you're using to achieve such clock speed. Anyone here have a general consensus on what BIOS revision to use besides 3.10P?

[BioPC]

Here's some OCZ EL PC3200 Platinum rev2, results on their newer version 1.1 [TCC5]...

[ben805]

ben805 - 337x8=2700MHz DDR674 @ 7-3-4-2.5-1T (http://www.xtremesystems.org/forums/attachment.php?attachmentid=28526) - DFI Ultra-D S939 (NF4 Ultra) - A64 Winchester - Centon Gemini LL PC3200



Didn't noticed it till saw this...mine is the GKILL PC4800 512LA 2x256MB, not Centon or Gemini....never heard of those before :lol: :D ;)

[Mr.President]

here my geil ultra x :)
its not the max ists my allday setting :D

http://img153.echo.cx/img153/5631/dsc002527kq.jpg

[Ziku]

I've flashed from 510-3 to 510-2 and gain 1MHz with a little bit better alpha timings :D

2x512MB G.Skill PC 4400LE (437 chips)
http://picserver.student.utwente.nl/view_image.php/1B5570IT8R24/picserver.gif

[Ziku]

Update :D

TCCD 2x512MB DDR636 Super PI 32M stable (http://photobucket.com/albums/b36/Ziku/?action=view&current=DDR636.gif)

[KenLau]

Corsair 3200XLPT Rev 1.2 /346mhz@3-4-4-8-1T/Vdimm 2.8v
DFI Lanparty NF4-D / bios 310
Venice 3200+ (LBBLE 0515 GPBW)
Air cooling / Coolermaster Hyper6
DDR692 32m pass :D :D

[formyfaith]

Shown as bellow screenie. :)

Test Rig:
- AMD A64 San Diego 3700+
- G.Skill F1-4800DSU2-1GBFF, DDR600 @ 5-3-3-2.5-1T
- OCZ Powerstream 520
- XP-90C + Vantec Tornado 38T 92mm

[bachus_anonym]

All valid entries have been added!

@KenLau

:welcome: to XS, man! Oustanding clocks there :slobber: :toast:

[chew*]

abit an8 sli
gskill 2x256mb f1 la

I have another screenie of 330mhz but with looser timings if you want it

http://members.cox.net/italygirl25/tccd%20325.bmp

[chew*]

heres the screenie of super pi bachus. had to drop down to 300mhz as i have a bunk memory controller on this 3500 claw however if you would like i can loop memtest for 24 hours and snap a shot of it for tccd at 325mhz stable.

http://members.cox.net/italygirl25/super%20pi.bmp

[JediMaster]

Howdy bachus and others !

Results below with 2 x 512 MB PDP Patriot XBLK at DDR580 2.5-3-3-8 w/ CPU speed = 9 x 290 MHz, vdimm @ 2.7V.

http://img41.echo.cx/img41/1126/x9h290t2p5338all24wk.th.png (http://img41.echo.cx/my.php?image=x9h290t2p5338all24wk.png)

CPU-Z validation here:
http://valid.x86-secret.com/show_oc?id=24289

[Thanatos]

Hi @ All !!! So this is my first post in here!
When I made my system, based on S939, I've been trying from the very beginning to overclock it 1:1 and this is what I've managed so far with
my A-DATA DDR566 sticks. Normally they do @283MHz with 3-4-4-8,
I succeeded stable use @285MHz with 2,5-4-3-7.
I'm gonna try in the future to push the system a little bit further :)
What do you think of the results? If you have any suggestions tell me please.

The settings I use in Genie BIOS are the following:
Tcl........2.5
Trcd......4
Tras......7
Trp........3
Trc........9
Trfc......14
Trrd.......3
Twr.......2
Twtr......2
Trwt......2
Tref.......3072
Twcl......Auto
Interleave............Enabled
DQS Control..........Increased
DQS Value............255
Drive Strength.......7
Data Strength.......2
Max Async............8
Read Preamble.......5
IdleCycle Limit.......256
Dyn.Counter..........Enabled
R/W Queue Bypass.16x
Bypass max...........7x
32Byte Gran..........Disable

[amrgb]

bachus, I've got some fresh stuff for your thread:
1. 2x512 DDR604 2.5-3-3-6 1T (going for the top :D )
2. 4x512 DDR572 2.5-3-3-8 2T

Rig:
- A64 3500 Winchester (CBBID 0451 EPMW) + XP120 + Delta 120mm 190CFM
- DFI NF4 Ultra-D (Bios 510-2)
- 4x512 GSkill 4400 LE (TCCD 440 chips)
- CM Stacker (case temperature 30-31ºC)

DDR 604 2.5-3-3-6 1T 2.9v

http://img176.echo.cx/img176/7305/ddr6049eu.jpg

DFI memory timings (from top to bottom):
200-E-2.5-3-6-3-12-16-3-3-2-3-2336-1-E-A-0-7-2-9-F-6-256-E-16-7-D

:D :cool: :woot: :D :cool: :woot: :D :cool: :woot: :D :cool: :woot: :D :cool: :woot: :D :cool: :woot: :D :cool: :woot: :D :cool: :woot: :D :cool: :woot:

DDR 572 2.5-3-3-8 2T 2.9v Bank Interleave Enabled

http://img128.echo.cx/img128/1038/ddr5722gb9no.jpg

DFI memory timings (from top to bottom):
200-D-2.5-3-8-3-16-22-3-3-2-3-2046-1-E-A-0-7-2-9-F-7-256-E-16-7-D

[ex2cib]

2.5-4-3-8 OCZ platinum rev. 2 TCC5 running 300x9 with 3000+ Venice 0517 APJW .

ram cooled by 120mm Sunon

[Ziku]

@amrgb

Nice results man!!!

Could You tell me what are Your's everyday settings of these 4x512 2T?
I'm concerning to buy another pair of LEs and wonder if they clock high enough :D I'm interested what is the max stable (gaming, win apps) MHz with 2,5-3-3-6 and tightest alpha timings as possible.

[Major]

Using a mixed set of G.Skill LE 4400 with 440 chips and G.Skill LA 4800 with 440 chips. Maximum Memetest stable was 290mhz and the best I could get in Windows was 285mhz PI 32m stable.

Using a DFI NF4 SLI with 3700+ SD (see server in my sig)

[amrgb]

@amrgb

Nice results man!!!

Could You tell me what are Your's everyday settings of these 4x512 2T?
I'm concerning to buy another pair of LEs and wonder if they clock high enough :D I'm interested what is the max stable (gaming, win apps) MHz with 2,5-3-3-6 and tightest alpha timings as possible.

Thanks Ziku.

Well, it's difficult to say what are my everyday use settings with 4x512 since I started to use 4x512 only a couple of days ago :D

But I have already two profiles: default and max overclock.

At default I run my cpu at 2200 with memories at 200 2-2-2-5 2.6v and following timimngs (bios 510-2):
200-D-2-2-5-2-7-9-0-2-1-1-3072-1-E-D-0-7-2-6-F-4-0-E-0-7-D

At max overclock I run the cpu at 2600 with memories at 260 2.5-3-3-7 2.7v and the following timings:
200-D-2.5-3-7-3-12-16-3-3-2-2-3072-1-E-D-0-7-2-8-F-6-128-E-16-7-D

The default profile is fully tweaked and I cannot tight any further. I should note that it's the exact same setting I was using with 2x512 (except for the 2T). So here no loosening due to the 4 dimms.

The max overclock profile is still in a "alpha" state and is my start point.

I used to test my settings with 4 instances of superpi32M running simultaneously and both profiles can pass this test and everything I've thrown to them so far.

With a good memory controller, you should have no problems with 4 dimms, and you can also pick the best 2 to set new 2x512 records, like I did :D

If you want more info just ask.

[L@TrO]

an old screen with gskill LA 2*512 2.5-3-3-6-T1@300mhz

-> http://users.skynet.be/bk265593/wooot.JPG

I think i can do +-305mhz 2.5-3-3-6

[amrgb]

@ L@TrO

You have to provide a screen with a superpi32M run and two cpu-z screens, showing the cpu and memory tab (make sure that the cpu-z version is visible) in order for your result to be comparable with the results in this thread. Superpi2M stability is way far from 32M stability.

Take the opportunity and give a try to 305 ;)

[Thanatos]

Hi @ All again!
So here there is a stable system with my Venice 3000+ @2700 1:1
and my A-DATA DDR566 sticks running @300 and timings 2,5-4-3-7 1T :)

Be well and have fun!

[KenLau]

All valid entries have been added!

@KenLau

:welcome: to XS, man! Oustanding clocks there :slobber: :toast:
Hi,Bachus
thanks a lot !! I'm glad to join the XS too ! :toast:
I"m also run more tests with this nice tccd,
347mhz (DDR 694) 3-4-4-8-1T /2.8V Super Pi 32M passed
360mhz (DDR 720) 3-4-4-8-1T /2.9V Super Pi 4M passed
300mhz (DDR 600) 2.5-3-3-6-1T/2.7V Memtest86 test #5 passed 84 tests
360mhz (DDR 720) 3-4-4-8-1T /2.9V Memtest86 test #5 passed 53 tests
and here are the screen shots :D :D

[bachus_anonym]

All latest valid entries are added! Thanks a lot guys :toast:

@L@TrO

Post 32M screenshot, please...

[amrgb]

bachus, I don't know if you will be happy :D or get mad :mad:, but I have another update to my result... DDR608 with all the settings the same except 3.0v and 23C of case temperature.

The weather here in Portugal may not be good for the beach as usually, but its sure great for overclocking :D

I'll post the screen later, because I have the felling that I may reach DDR610 in the next days.

EDIT: here's the pic

http://img96.imageshack.us/img96/3865/ddr6084gx.jpg

Settings: same as used on the DDR604 pic, but with 3.0v

Let's see if I can reach DDR610. Yesterday it bailed out at loop7. I have to loose the secondary timings a bit.

[Badong]

'bout that. In NF3/NF4 & TCCD - Highest stable clocks - REPORT IN !!! (http://www.xtremesystems.org/forums/showthread.php?t=53290):

--------------------------------------------------------------------
4x512MB :D

TRCD=3

amrgb - 286x9=2574MHz DDR572 @ 8-3-3-2.5-1T (http://img128.echo.cx/img128/1038/ddr5722gb9no.jpg) - DFI Ultra-D S939 (NF4 Ultra) - A64 Winchester - Gskill PC4400LE

TRCD=4

Major - 285x10=2850MHz DDR570 @ 6-3-4-2.5-1T (http://www.xtremesystems.org/forums/attachment.php?attachmentid=33226) - DFI SLi-D S939 (NF4 SLi) - A64 San Diego - Gskill PC4400LE + Gskill PC4800LA


Four double-sided sticks at 1T? I don't think so... Besides, take a look at their A64 tweaker screenies :)

[amrgb]

Just for the record, since it was already posted in my thread (which will be short lived unlike this one)

2x512 DDR610 2.5-3-3-6 1T 3.0v Superpi32M stable (ambient temperature 24C)

http://img131.imageshack.us/img131/6337/ddr6109oq.jpg

cpuz validation page (yes, I'm back from the Middle Age :D ): http://valid.x86-secret.com/show_oc?id=25709

DFI memory timings (from top to bottom):
200-E-2.5-3-6-3-16-22-4-3-2-3-2336-1-E-A-0-7-2-9-F-6.5-256-E-16-7-D

I think that this is the end of this nice story... until 3.1v kicks in... but not until the winter temps come back (I don't want to be greedy and ruin my sweet sticks).

[Timothy730]

Here u go 300mhz ddr 600 (2.5-4-4-6) 2T.......
I think i can get it tighter.
<a href="http://img296.imageshack.us/my.php?image=300mhz5bx.png" target="_blank"><img src="http://img296.imageshack.us/img296/4439/300mhz5bx.th.png" border="0" alt="Free Image Hosting at www.ImageShack.us" /></a>

[ex2cib]

i have a new one

i never tried it again with 2.5-3-3-7 after i changed to 618-3 bios, but i needed a little more than what 2.5-4-3-8 could give me (trying to break a 14k CPU score in aquamark3)

i found some old settings, i think i got them here somewhere

anyways, my new high score
9x295 2.5-3-3-7 @ 2.83v
OCZ platinum revision 2 v1.1 TCC5 chips

does anyone know what the fastest TCC5 32m stable is? just want to see how close i am at

edit: forgot to put CPU-z in the first one's, so i ran 32m again, and have it in the 2nd screenshot

[Eldonko]

@bachus_anonym

Heres an update, DDR626. Using 0618-1 and 4200EL TCC5. Cheers.

http://members.shaw.ca/Eldonko/313-1.JPG

[ZX6R]

http://img243.imageshack.us/img243/9459/superpi32m1ax.jpg

[ncsa]

315x8 = 2520Mhz DDR630 @ 7-3-4-2.5-1T - DFI SLi-DR S939 (NF4 SLi) - A64 Venice - GeIL ONE Series TCCD PC3200

BIOS 7/04-3

Cheers

[qk4723Deluxe]

GeIL TCCD DDR600 6-3-3-2.5 Super Pi 32M

http://home.pchome.com.tw/club/qk4723/A8N.Premiun1.02/A8NSP.5.jpg

http://home.pchome.com.tw/club/qk4723/270032mpass.PNG

[qk4723Deluxe]

Memtest86 3700+ 300x9= 2700Mhz DDR600 1T

DDR600 5-3-3-2.5 #5 1176 PASS 0 Erro
http://home.pchome.com.tw/club/qk4723/7800GTX/5.1176Pass.jpg

DDR622 6-3-3-2.5 #8 45 PASS 0 Erro
http://home.pchome.com.tw/club/qk4723/ELSA7800GTX/DDR622.jpg

3000+ 328x9= 2953Mhz DDR656 1T
http://home.pchome.com.tw/club/qk4723/ELSA7800GTX/DDR656.jpg

[ZX6R]

http://img140.imageshack.us/img140/781/superpi32m9ba.jpg (http://www.imageshack.us)
http://img140.imageshack.us/img140/5103/ddr6507if.jpg (http://www.imageshack.us)

[qk4722]

3000+ GEIL TCCD DDR644 2.5-4-3-6 1T PI32M
http://home.pchome.com.tw/club/qk4723/qk4722/GEILONE.PNG

[bachus_anonym]

***Updated**

@Timothy730

Tighten it up, man! Get off 2T :D Also, what PDP exactly is that? PDP Patriot XBLK PC3200?

@qk4723Deluxe and qk4722

Thanks a lot for dropping by, guys :toast: Nice to see some great clocks with GeiL UltraX :thumbsup:

@qk4722

What mainboard is that? DFI Ultra-D ?


This thread is getting bigger day after day! Thanks to you, guys! Keep'em coming, please :toast:

[qk4722]

***Updated**

@Timothy730

Tighten it up, man! Get off 2T :D Also, what PDP exactly is that? PDP Patriot XBLK PC3200?

@qk4723Deluxe and qk4722

Thanks a lot for dropping by, guys :toast: Nice to see some great clocks with GeiL UltraX :thumbsup:

@qk4722

What mainboard is that? DFI Ultra-D ?


This thread is getting bigger day after day! Thanks to you, guys! Keep'em coming, please :toast:

yes DFI Ultra-D thx ! :toast:

[Timothy730]

yes it is Pdp xblk pc 3200
I cant get 1t quite stable but i had 2.5-4-3-7 stable before when i had a winchester.
I just got my venice recently so im still working out the quirks in the memcontroller.

I think i might be able to get 305mhz of of em :)

just gotta tweak!


Tim

[qk4723Deluxe]

Dear bachus_anonym
Please Update My Record ~
Thx :)

GeIL One SE Power~
306x8 = 2449.1Mhz DDR612 5-3-3-2.5 Most Tie Setting !
http://home.pchome.com.tw/club/qk4723/GeIL.TCCD/GeIL.TCCDking.png

[ianocean]

Geil One S PC4800 2.5-3-3-7 1T 292Mhz
http://img272.echo.cx/img272/7783/tccd32m29206ml.th.jpg (http://img272.echo.cx/my.php?image=tccd32m29206ml.jpg)

[Sucka]

Here's my G.Skill LE's.

http://suckasd.com/computer/ddr600/perfectvolts.jpg

http://suckasd.com/computer/fx57/32mpi.jpg

[cupra]

2x512 gskill ff rams, i can do more mhz in my rams buy in lower multi like 9 or 10.

[Clevor]

This is PQI Turbo Dual Channel Kit, PC3200 at 2-2-2-5, 2x512 at 301x9, 2.5-3-3-7. Other specs:

Board: DFI Ultra-D
BIOS: 510-3
DIMM slots: Orange
VDIMM: 2.8 volts
VLDT/VCHIP: 1.2/1.5
LDT: 4x
CPU: CABGE 0517UPAW San Diego
VCORE: 1.456 volts

The sticks max out at 308 or so at 2.5-3-3-7 but I picked 301 to try SuperPI 32M :).

[gundamit]

I just noticed I'm listed as having my TCCD run at 334 2.5-4-3. Thats not right. CPU-Z is not showing that I'm running a 9:10 divider so that really only 300. Please make the correction. I wish my sticks did that but while good performers they are not freaks. ;)

[THunDA]

There is a Oc database at DFI street.. This is my recent entry so I figured to post it here also.. Its not a very high mem oc.. but I think its a good clock for 4x512mb's.. ;)



short description:
264x11 @ 2904Mhz, 1.325v + 126%
4x512mb's @ 2.5-4-8-3 @ 2.9v vdimm


Genie BIOS Settings:

FSB Bus Frequency - 264
LDT/FSB Frequency Ration - Auto
CPU/FSB Frequency Ratio - 11
PCI eXpress Frequency - 100Mhz

CPU VID StartUp Value - 1.55v

CPU VID Control - 1.325v
CPU VID Special Control - Avove VID * 126%
LDT Voltage Control - 1.20v
Chip Set Voltage Control - 1.60v
DRAM Voltage Control - 2.90v

DRAM Configuration Settings:

DRAM Frequency Set - 200 (DRAM/FSB:1/01)
Command Per Clock (CPC) - Disable
CAS Latency Control (Tcl) - 2.5
RAS# to CAS# delay (Trcd) - 04 Bus Clocks
Min RAS# active time (Tras) - 08 Bus Clocks
Row precharge time (Trp) - 03 Bus Clocks
Row Cycle time (Trc) - 09 Bus Clocks
Row refresh cyc time (Trfc) - 16 Bus Clocks
Row to Row delay (Trrd) - 02 Bus Clocks
Write recovery time (Twr) - 02 Bus Clocks
Write to Read delay (Twtr) - 01 Bus Clocks
Read to Write delay (Trwt) - 02 Bus Clocks
Refresh Period (Tref) - 3120 Cycles
Write CAS Latency (Twcl) - Auto
DRAM Bank Interleave - Enabled



DQS Skew Control - Auto
DQS Skew Value - 0
DRAM Drive Strength - Level 7
DRAM Data Drive Strength - Level 2
Max Async Latency - 8
DRAM Response Time - Fast
Read Preamble Time - 5.5
IdleCycle Limit - 256 Cycles
Dynamic Counter - Disable
R/W Queue Bypass - 16 x
Bypass Max - 07 x
32 Byte Granularity - Disable(8 Bursts)



==========


Prime95 + 3dMark2001SE + 2x CPU-Z + MBM + A64Tweaker + RivaTuner vid clocks :

http://img239.imageshack.us/img239/4979/ocdb14mj.jpg


3dMark2003 + Everest + SuperPi 32m + MBM :

http://img239.imageshack.us/img239/1425/ocdb22cf.jpg


3dMark2005 :

http://img239.imageshack.us/img239/8466/ocdb37ix.jpg


Aquamark 3d:

http://img239.imageshack.us/img239/2048/ocdb42vk.jpg


==========

EDIT..
btw.. some of the images are cropped just because thats the way it needs to be in the database ..

[kamui]

I have 2*512 geil ultraX I can't push them above fsb 315 :(

qk4723Deluxe and qk4722

can you post your A64Tweak screen plz , I need help to push my geils ultra x

[qk4722]

I have 2*512 geil ultraX I can't push them above fsb 315 :(

qk4723Deluxe and qk4722

can you post your A64Tweak screen plz , I need help to push my geils ultra x

:toast:

[kamui]

thx bro, but hw many volt for your ram and , which bios ?
:toast:

[qk4722]

thx bro, but hw many volt for your ram and , which bios ?
:toast:

:)
ram volt 2.8+0.03v
bios 623-3

[politenessman]

this is 256mb x 2 kit of g.skill la. mainboard was dfi ultra d. cpu was 3700 sandy, cabge 0517upbw, air-cooled w/xp90 and medium panaflo. i did not tweak, left everything at auto except 2.5/4/7/3 and 1t. vdimm = 2.95
http://photos21.flickr.com/28544010_0c0b6ddb95_o.png

very truly yours,
politenessman

[BioPC]

Hi bachus!
Here are some hot TCC5's results: :D

http://img251.imageshack.us/img251/8409/oczddr6162er.jpg (http://imageshack.us)

[formyfaith]

I'm pretty sure this will be my last record. ;)

Here it goes.

http://myhome.hanafos.com/~onechu/ramresults/gskill_ff_309_32mbspi.jpg

[Waus-mod]

Here are my highest clocks of tccd 490 aka Corsair XL 2x256
I know the sticks can run harder, but i need a new motherboard first. And then i can test whats max stab