DFI NF4 Ultra w/ TCCD is awesome...

[quicksilverXP]

I posted most of my results on other the Overclocking forum... but I'd figure I'd give it a try in the bandwidth section. For two days I was having trouble with my DFI NF4 board to hit past 260.... and I would always get random BSODs, or random restarts.... but now, after switching from a Thermaltake 680w to an Enermax 600 watt, it owrks perfectly. I also am running off the 5v which seemed to give me more stability at higher overclocked speeds.

My settings:

LDT:4x at 1.4v
Chipset: 1.6v
Vcore: 1.5v (startup) x 110%
Bios: Feb. 1
Multi: 8
HTT: 327
Mem Divider: 200Mhz
Timings: 2.5-4-3-7
Bank Interleave: Enabled
Memory: Centon Advanced 3200LL (newer revisions of TCCD) 2x512MB
CPU: 3000+ 0440SPMW

In conclusion.. get this board!! Bandwidth is lower because my clockspeed isn't as high... my 3000+ can't get above 2750 Mhz on air...=(

http://centon.infopop.cc/evefiles/photo_albums/3/6/7/3670034113/2550034113_81783D3C20D77CA13DDB94E073402C60.JPG

[RyderOCZ]

Very Nice :)

Here (http://dragoncc.sytes.net/pics/kanon.jpg) is some PC3700 Platinum on Epox 9nda3+

[RyderOCZ]

You list mem divider of 166 but CPU-z shows 1:1 which is correct?

[mcbarnet007]

Hey is your cpuz not reading the divider correctly? you say it is at 166mhz but it still shows the same as 200mhz

[quicksilverXP]

My Bad... it's 1:1

I edited the first post to show that it's 1:1... (Divider at 200Mhz)

[Rabbi_NZ]

Nice MHz, but bandwidth seems low... are you running 2T?

[quicksilverXP]

It's low because my CPU Mhz is low... I'm running 1T. A64 bandwidth scales with Mhz...if I were to get over 2.7 Ghz at tha same memory clock... I'd hit well over 8,000MB/s... and I'm rnning on a low multi (higher multis can give higher bandwidth as well)

[kraggy]

Very nice! :up:

i hope my Gskill pc4400 does that good on my DF-SLI.

[D_o_S]

QuicksilverXP, what PSU are you using then?

[quicksilverXP]

Enermax 600watt

[perry_78]

Sweet! What voltages for the DIMM's?

You're running off the 5V line. Why so? I know you said added stabilty, but I can't quite grasp how that would work with only 2,6~2,9 going through the TCCDs.

[D_o_S]

Enermax 600watt

Yes, I saw that in your first post, but by any chance is it the EG701?

[quicksilverXP]

This one... http://www.newegg.com/app/ViewProductDesc.asp?description=17-103-497&depa=0

[HARDCORECLOCKER]

Nice MHz, but bandwidth seems low... are you running 2T?

:D Low? Whatcha dreaming at nite??? Almost 8K at "only" 2,6 GHz is best I ever saw - I get 8,5K at 3,3GHz.............. :toast:

[quicksilverXP]

Yeah... I really wish I had an FX-55 or an 0448SPAW Winchester to compliment this board and memory.

[MaxxxRacer]

hmm that is some relaly nice oc..

ur super pi seems low to me, but i guess its the low mhz on the cpu. my a64 at 2.8ghz with 280htt 1:1 2.5-3-3-7 does 31 seconds too..

[apu673]

Nice, my Gskill can only do 280mhz right now.