ABIT Ai7 mods

[jkabaseball]

Anyone know a place to find the VAGP Volt mods? Here's my set up:

ai7
2.6c
Gig BH-5

I can get the chip up to 3.6 but not very stable, I think its the VAGP volts. Right now its at 1.65, the max for this board. I think the chip is capable of more. I increased to VAGP from stock to 1.65 and it became more stable at higher speeds, but at 3.6 stable yet. I was told that the VAPG would help some. I googled around and searched around here, and no places to do it. I haven't modded a motherboard before but I have 2 of them sitting here. Any help is greatly appreciated.

[saaya]

Originally posted by CATCH22ATPLAY
Kyosen Vagp mod does not require cutting traces. Use the Lm358 chip left of southbridge chip.

Kyosen i'm working on a better VTT mod. I have it complete already and pics. Just gotta put everything back together and test it. I didn't cut the trace on the front of the mobo. I cut the trace on the back side. Then soldered a VR from left side MC50 to bottom leg of mosfet located in upper right corner of mobo. A bit easier than the old way of doing it. A finished pic of VTT mod. The green wires only.

http://pages.prodigy.net/catch22atplay/vttmod6.jpg

read this thread:
http://www.xtremesystems.org/forums/showthread.php?t=12914&page=12&pp=25&highlight=ai7+vagp

if you cant find it then pm catch22 kyosen or macci or maybe fugger if they remember it :)

and next time use the search function of this forum ;)

[jkabaseball]

i did, the only mod i could find was the for the memory. I searched "ai7" and got nothing.
What you posted is the IC7, I've read these boards are similar, will it work for the ai7?