PDA

View Full Version : 17k from Ti4200....



Highland3r
01-14-2005, 07:35 AM
.. and AXP...
BUT it seems a little low comparing the run to a previous 16.7k run...
Any ideas why, and is this performance about right for the clock speeds/system speed etc....

17k run (http://service.futuremark.com/compare?2k1=8367859)
16.7k run (http://service.futuremark.com/compare?2k1=8112292)

See specs on ORB not sig :) Runs are all air btw....
Clocks seem limited by the PSU, 3.3v line @ 3.6 has dropped to 3.35 by the time it reaches the gfx card... unless the readpoints are incorrect...

zakelwe
01-14-2005, 11:45 AM
.. and AXP...
BUT it seems a little low comparing the run to a previous 16.7k run...
Any ideas why, and is this performance about right for the clock speeds/system speed etc....

17k run (http://service.futuremark.com/compare?2k1=8367859)
16.7k run (http://service.futuremark.com/compare?2k1=8112292)

See specs on ORB not sig :) Runs are all air btw....
Clocks seem limited by the PSU, 3.3v line @ 3.6 has dropped to 3.35 by the time it reaches the gfx card... unless the readpoints are incorrect...

2.1v gpu air cooled .. wow ...poor old gpu !

I've never measured a video card over about 3.3v on the card so maybe ther is a regulator in there ?

Regards
Andy

Highland3r
01-14-2005, 11:54 AM
2.1v gpu air cooled .. wow ...poor old gpu !

I've never measured a video card over about 3.3v on the card so maybe ther is a regulator in there ?

Regards
Andy

Ah yea, thats a possibility :D

Yea lol the rear of the card gets a bit toasty, the intel sink and tornado do a reasonable job of cooling hehe

f00t
01-14-2005, 12:07 PM
only a stock intel hs and a tornado. now i'm impressed

Highland3r
01-14-2005, 01:33 PM
Slightly higher, used a single stick of BH6..
http://service.futuremark.com/compare?2k1=8368554

Need to get it running dual channel... :O