New RAM List!!! (now with 1GB stick listing too)

[Monge]

oh, on another post here on xs it said that it had utt chips :(

Look this:
http://forums.mushkin.com/phpbb2/viewtopic.php?t=2057

Maybe the HP3200 with green PCB on ebay is. Not confirmed yet.

I would say buy the Redline.

[i found nemo]

know a place i could buy a stick of 512 for 60 bux?

[iq100]

i can post a few i supose. i just never see anything special about my mem scores so i never post them...

peace perc,

Are your XBLK timings with command rate 1T or 2T?

In general, do you guys think (keeping everything else the same) that 1T give 1%, 2%, 5%, or more, improvement in sustained memory bandwidth with a X2 3800 type cores.

And lastly some say that X2 3800 Toledo OC better than Manchester. But some say, because Manchester smaller die uses less power, it should OC as well or better. Which is correct?

[Punisher!]

Big update | 29/09/2005:
Updates\Corrections:
1GB XP3200 Dual Pack 2-2-2 (2x512MB) tccd/tcc5
1GB XP4400 Dual Pack 2.5-4-4 (2x512MB) tccd
1GB REDLINE 3200/3500/4000 (2x512mb) UTT/ch
PQI TURBO DDR550 is using Hynix D5 + Brainpower 815
OCZ VX PC3500

CORSAIR ALL Rev. 1.X


1GB Sticks List coming... any help is appreciated (not just words... you know I need facts to realize a reliable list)...

Bye! :D

[[cTx]Philosophy]

Iwould like to know which core to gofor also..
I was thinkinmanchester but now I dunno
I have 2X1024 pdp 1024vv 3200 that has done 254 2.5-3-2-5 and 2.5-3-2-0-7-16 :)
Waiting onmy new mobo to try them out more
Im getting the ubber Asrock and will report results as soon as i can sell the dfi nf3 and afford the components, i might throw em inthe infinity and see what theyll dowith 2.5-3-3 or 4-3

[Punisher!]

Update:
Corsair XMS-PC3200C2 Rev4.3 (2-3-3-6-1T) --chip--> Samsung TCCD & TCC5 (Rev. F) ~ Brainpower PCB

[babyelf]

1GB Sticks List coming... any help is appreciated (not just words... you know I need facts to realize a reliable list)...

Patriot 3200LLK 2GB kit infineon BE-6 Link (http://www.xtremesystems.org/forums/showthread.php?t=73743)
Gaspar got CE-6 for his pair link (http://www.bleedinedge.com/forum/showthread.php?t=12948)

OCZ 3500 is GX Gamers eXtreme and it's UTT BH-5 :)

TEAM Xtreem BH-5 UTT link (http://www.mini-itx.com.au/Images/TEAM-BH5/InBoxPic.JPG)

TEAM Xtreem 2GB Samsung UCCC link (http://www.xtremesystems.org/forums/showthread.php?t=73371)

[Punisher!]

Patriot 3200LLK 2GB kit infineon BE-6 Link (http://www.xtremesystems.org/forums/showthread.php?t=73743)
Gaspar got CE-6 for his pair link (http://www.bleedinedge.com/forum/showthread.php?t=12948)

OCZ 3500 is GX Gamers eXtreme and it's UTT BH-5 :)

TEAM Xtreem BH-5 UTT link (http://www.mini-itx.com.au/Images/TEAM-BH5/InBoxPic.JPG)

TEAM Xtreem 2GB Samsung UCCC link (http://www.xtremesystems.org/forums/showthread.php?t=73371)

Ok! Yeah, my mistake, OCZ corrected and the others signed on my .txt :D.

Thanks man! ;)

[babyelf]

np ;)

[demonR6]

I have not seen the new G.Skill Extreme Series DDR 500 PC 4000 on here yet. 2 @ 1GB Samsung UCCC 3-4-8-4. I just purchased and got them on Friday.. still trying to find out which bios works best for the DFI NF4 Ultra D board. The 623-3 bios (http://www.dfi-street.com/forum/showthread.php?t=25046) works but I cannot figure out how to get above 250 FSB on it with those timings. Now the 704-2BTA bios (http://www.dfi-street.com/forum/showthread.php?t=22997) I can am Prime95 stable as high as 280 FSB. Timings are the same in both, 1/01 E-3-4-8-4 with everything else set at whatever the bios defaults are. On the 704 bios I cannot seem to get it to run on a divider at all.. most likely something I am doing wrong. I am not saavy messing with memory unfortunately.. way too much to try and absorb and too much going on.

[Breaker10]

OCZ DIMM 1 GB DDR-400 (OCZ4001024ELPE, Platinum EL) with infineon Ram :(

[Billy_BAD_Boy]

Hi guys,
Did you see that - Mushkin xp 4400 512 MB for a very reasonable price :) click (http://www.newegg.com/Product/Product.asp?Item=N82E16820146384)
Someone familiar with the chips of that memory modules. According to mushkin they no longer use TCCD chips. I wonder if these modules are with TCC5 or....

Thanks

[dippyskoodlez]

Hi guys,
Did you see that - Mushkin xp 4400 512 MB for a very reasonable price :) click (http://www.newegg.com/Product/Product.asp?Item=N82E16820146384)
Someone familiar with the chips of that memory modules. According to mushkin they no longer use TCCD chips. I wonder if these modules are with TCC5 or....

Thanks

tcc5 last I checked.

[Wired-HoH]

Update:
Corsair XMS-PC3200C2 Rev4.3 (2-3-3-6-1T) --chip--> Samsung TCCD & TCC5 (Rev. F) ~ Brainpower PCBIncorrect: Most are listed as TCCX, which means Samsung didn't classify them.


I've personally seen only v1.4, v1.5 and v1.7, and they were all Winbond chips; the rest is based on 2nd hand info. Also, it seems all the 3200C2PT 1.X and 2.X are Winbond, 3.X is Infineon, 4.X is Samsung and 5.1 & 6.1 is MosEl; Corsair is using different numbers for every chip manufacturer.Incorrect as well. Multiple ICs from different manufacturers can be under the same version # (x.y).

NEW Corsair IC Inquiry Thread (http://www.houseofhelp.com/v2/showthread.php?t=43781)

[high5]

Most are listed as TCCX, which means Samsung didn't classify them.
fyi, there's no such thing as unclassified samsung ic's.

even ramguy doesn't say that:
TCCX = Is a down binned TCCD IC weather from Samsung or by us, so it can be a TCC3 or TCC4 or TCC5 or a TCCD marked on the IC, but it really does not matter what IC we use as long as the modules meet their tested spec.

[Wired-HoH]

Bah, was thinking Corsair, typed Samsung :0

[Punisher!]

Incorrect: Most are listed as TCCX, which means Samsung didn't classify them.


Incorrect as well. Multiple ICs from different manufacturers can be under the same version # (x.y).

NEW Corsair IC Inquiry Thread (http://www.houseofhelp.com/v2/showthread.php?t=43781)

In don't mind if Corsair didn't classify them. Their performance are assimilable to Samsung TCCD & TCC5, so it doesn't matter if it is written TCCX.

[AKURA]

Ultra XL PC3200 Samsung TCCD 510 BP6U815
http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=1071046&CatId=0

The other dude with samsung tccd sticky must be sleeping :D He hasn't add this one yet. So I'll post it here for you Punisher. :toast:

They are moderate overclockers...

[Billy_BAD_Boy]

Hi guys,
Did you see that - Mushkin xp 4400 512 MB for a very reasonable price :) click (http://www.newegg.com/Product/Product.asp?Item=N82E16820146384)
Someone familiar with the chips of that memory modules. According to mushkin they no longer use TCCD chips. I wonder if these modules are with TCC5 or....

Thanks

Common guys....no one tried this extremely cheap memory (only $58 for a 512 MB stick). Keep in mind that the dual pack cost about $170.....what is indeed the difference?

[Sparxxxy]

Anyone know something about this
2x512 Corsair XMS3200C2PRO v4.3
XMS3202 V4.3
0518032-3
chipset... max fsb, timings etc.
thanks

[high5]

ramguy at corsair support forums has reported c2 v4.3 multiple times as either samsung tccd/5 or promos.

you may post details there and wait for ramguys reply.

alternatively, you could try and see if your ram can do 2-2-2@200 using low vdimm. if it does, its should be samsung.

[Sparxxxy]

yes it does with 2.8
now i have 240 @ 2.5-3-3-8 can i lower timings anymore? cause i tried and it freezes.
is system faster with FSB default 200 (CPU @2Ghz)with 2-2-2-2-5 or FSB240 (CPU @2.4Ghz) with 2.5.-3-3-8

[high5]

that looks like samsung tccd/5. those are typical timings for most tccd/5 @240. however, i believe you should be able to push your ram further, upto 260-270, maybe even more.

as for 200vs240, real time performance differences should be minimal, with slight advantage for higher frequency.

[Punisher!]

Anyone know something about this
2x512 Corsair XMS3200C2PRO v4.3
XMS3202 V4.3
0518032-3
chipset... max fsb, timings etc.
thanks

They are on the list... Pro means just "with LED" :D.

[Sparxxxy]

ok, thanks...

[ZeroX]

Are ALL new GEIL pc3200 value blue UTT-BH5?

[Punisher!]

Are ALL new GEIL pc3200 value blue UTT-BH5?
Yeah, all new ones... but the risk is always present seeing that you still could find old ones.

[keneda212]

sorry my poor english, but i am a french man :)
i have recover my ram to the sav of corsair

CORSAIR XMS 4000 V3.3 (3-4-4-8)
but i don't found what chip is in this ram

if you can help me, thanks

[high5]

xms4000 v3.x are samsung based most likely.

go to corsair support forums and post info about your ram (including lot#) in ic inquiry thread. you should get the most accurate answer there.

[uOpt]

Are ALL new GEIL pc3200 value blue UTT-BH5?

Well, the 2x1GB cannot.

http://www.newegg.com/Product/Product.asp?Item=N82E16820144322

[Punisher!]

Well, the 2x1GB cannot.

http://www.newegg.com/Product/Product.asp?Item=N82E16820144322

True, in fact mine is called 256/512MB STICKS RAM LISTING ;).

[Billy_BAD_Boy]

Are ALL new GEIL pc3200 value blue UTT-BH5?

Any idea what oc. we could expect from this combination?

It's a pitty that in the forum has so little info about the GEIL Value blue :(

[Ziku]

OCZ EL PC 4200 (2,5-4-4-7).
Anybody know what chips are in these sticks?

[[MsT3r]$eR9!o]

Anyone any idea when the '1gb sticks ram listing' is going to be updated?

[Punisher!]

$eR9!o']Anyone any idea when the '1gb sticks ram listing' is going to be updated?

Exams period here... :D.

[Agent Smith]

is still avaible in some shops this ram Mushkin PC3200 Level II V2 (2-2-2) --chip--> Samsung TCCD?? how it is ?? is it like others tccd rams or is it worse??
thank you very much

[boardsportsrule]

one to add is some mushkin HP3200 2-3-3 (P/N:991432) 512 module ships with
0450VR
V58c2256804SAT5B

which according to here(http://tech.vault9.net/forums/Memory_Chips_List-t22118.html) is:
Vitelic 5ns - This is 5ns ram from Mosel. It is commonly found in PC3200 offerings, and at this speed is rated at cas2-3-3-6. This is not bad, but nothing out of the ordinary. It is similar to CH-5 from Winbond. This ram can clock to around 240 MHz and hold decent timings such as cas2.5-3-3-6. If timings are kept at 2-3-2-X, then this ram will typically max out around 220 MHz. This can be found in Corsair XMS3200, Geil Ultra PC3200 and PC3500, OCZ PC3200 and PC3700. This is not a bad choice of ram at all. It offers great overclockability while still holding very respectable timings. Although Mosel is not a well known name in the memory industry, you can see that the top memory manufacturers are using their ram. If you can get these on the used market, they would make a very sweet deal. I have not seen these in Value Ram offerings, but that does not mean they do not exist. Identifying these can be somewhat difficult, as many companies re-label them. Take a look at the ram list to be sure of what modules contain these chips. You can identify these chips by the last 5 characters being SAT5B.

i got this from a RMA of some blue Cl2 stuff....UTT...dammit, i feel robbed..owell..

[TEDY]

guys!!!!

http://www.teamgroup.com.tw/overclocking/ddr-400-mhz-dc-bh-5-series.html

[oktavius]

Hello
i got PC3700 (2,5-4-3) --chip--> Samsung TCCD (rev. F)

no TCCD chips.

Mosel Vitelic 5ns and BrainPower PCB 808

if just find them with a color heatspreader, but these are silver.

[Russ_64]

Are ALL new GEIL pc3200 value blue UTT-BH5?

As stated by someone else above, the 2Gb kit is not UTT/BH-5 as they do not like high voltage and do not OC above 216 (my max so far).

Mine have a PCB marked Elixir which I take to mean that they are made by Nanya and presumably the chips are also Elixir 5ns. PS - those Blue heatspreaders are stuck on so cannot remove them to see the actual chips.

With relaxed timings (as per my sig) they are stable with OC on a 166 divider.

[TheMeatFrog]

My XMS-PC3200C2 Rev1.1 are CH-5 not BH-6 like listed. Maybe this should be updated... :)

[funkflix]

Ur sure? Never seen old CH5 who did 200Mhz 2.0-2-2-5 2,6V even not up to 280 2.0-2-2-5. ;)

http://www.xtremesystems.org/forums/showpost.php?p=758803&postcount=1

Edit: Ok sry, maybe u mean that there are two versions.. i forgot that. :)

One with CH5, one with BH6.

[TheMeatFrog]

Ur sure? Never seen old CH5 who did 200Mhz 2.0-2-2-5 2,6V even not up to 280 2.0-2-2-5. ;)

http://www.xtremesystems.org/forums/showpost.php?p=758803&postcount=1

Edit: Ok sry, maybe u mean that there are two versions.. i forgot that. :)

One with CH5, one with BH6.
Yes that's what I mean. I purchased a pair thinking I was getting a deal because they were listed in this thread as bh-6 but once they arrived and didn't OC anything like bh-5/6 I knew something was up. So I took off the heatspreader only to find this (http://img373.imageshack.us/img373/1892/img14181pq.jpg)! :mad: Also killed that stick in the process of taking the h/s off. LOL note the chunks taken out of the PCB. :p: I guess I took one for the team on this one, no worries though these ch-5 chips aren't worth the PCB they're made on. :)

[funkflix]

Also killed that stick in the process of taking the h/s off. LOL note the chunks taken out of the PCB. :p:

:D

U was a bit rough tbh.. But good to know, that there are 3200C2 with CH5 too, never seen some before. :)

[TheMeatFrog]

:D

U was a bit rough tbh.. But good to know, that there are 3200C2 with CH5 too, never seen some before. :)

Indeed I was :p: I read some place else that Corsair mem are notorious for dying while removing the h/s since they are VERY hard to remove. It was worth it I guess to find out what IC it was. ;)

BTW here is a picture of the sticker so maybe this can help some other people avoid making the same mistake I did. :)

http://img52.imageshack.us/img52/3585/img14113jl.th.jpg (http://img52.imageshack.us/my.php?image=img14113jl.jpg)

[ArcTan]

My XMS-PC3200C2 Rev1.1 are CH-5 not BH-6 like listed. Maybe this should be updated... :)probably because your sticks were recent 0338
Sometimes you'll find CH5 where BH5/6 should be and vice versa
I had a pair of XMS3200LL v1.2 which turned out to be BH5 instead of CH5

[Punisher!]

Added GeIL ONE TCCD (ES).

[Wired-HoH]

My XMS-PC3200C2 Rev1.1 are CH-5 not BH-6 like listed. Maybe this should be updated...probably because your sticks were recent 0338
Sometimes you'll find CH5 where BH5/6 should be and vice versa
I had a pair of XMS3200LL v1.2 which turned out to be BH5 instead of CH5

That's because the list is plain WRONG for Corsair memory. ICs can and will change within the same part # / revision #. The LOT # is needed to successfully identify the IC.

There's already a huge list here: Corsair's IC Inquiry Thread (http://www.houseofhelp.com/v2/showthread.php?t=44365)

No need to remove the heat spreaders (thus voiding the warranty) on Corsair memory when you can find out the IC by asking Corsair directly.

[Captin Insano]

Very nice list. Helps tons!!

[Wired-HoH]

No problemo.

[Kalero]

anyone have some info about these here?

Corsair Twinx1024 3200C2PRO (2x512)
XMS3202 v4.3
0518032-3

thanks

[ReelMonza]

http://www.houseofhelp.com/forums/forumdisplay.php?forumid=128

[Wired-HoH]

Follos ReelMonza's link, go to the Enthusiast's Corner, post in the IC Inquiry thread stickied at the top.

That lot # looks familiar though, did you already post there?

[Kalero]

yes, i posted there... it's the last post :D
but no answer so far

[Spyrus]

Check my memories...
http://www.thelab.gr/showthread.php?postid=21084#post21084
Transcend Value Ram DDR333 (spd : 2.5-3-3-7)
with Winbond BH-6.
They are missing from the list and little know about them.
Bought them in Greece 2 years ago.

[tijgert]

My ram seemed to be missing so I'm filling in what I found:

2x 1GB OCZ PC4000 Platinum edition Enhanced Bandwidth, Extended voltage protection, Ultra low noise.

It runs at 3-3-2-8 with Infineon HYB2D512800CE-6 on Brain Power PCB.

Infineon says: HYB25D512800CE-6 / 512Mb,64Mx8, DDR333 2.5-3-3 / PG-TSOPII-66

So it seems to be only 333MHz chips that can do 500MHz.

Here's a nice review: http://www.overclockersonline.com/index.php?page=articles&num=321&pnum=0

[Punisher!]

My ram seemed to be missing so I'm filling in what I found:

2x 1GB OCZ PC4000 Platinum edition Enhanced Bandwidth, Extended voltage protection, Ultra low noise.

It runs at 3-3-2-8 with Infineon HYB2D512800CE-6 on Brain Power PCB.

Infineon says: HYB25D512800CE-6 / 512Mb,64Mx8, DDR333 2.5-3-3 / PG-TSOPII-66

So it seems to be only 333MHz chips that can do 500MHz.

Here's a nice review: http://www.overclockersonline.com/index.php?page=articles&num=321&pnum=0

And here http://www.xtremesystems.org/forums/showthread.php?t=82975 a funny story hehehehehe.

Thanks btw! :D

[TommyW]

Dudes what chips do adata and geil value crap have?? :p:

sry not 4 me i buy bh 5 two twinmos memory sticks next week :clap:

[MasterOfTheReal]

Anyone any idea what chips lie within LPT ram??
I have two sticks of it one pc3200 and one pc4000,
No system to test in ATM but Im looking for specs on them.
Google throws this back whick is of no use to me at all!!!
http://www.it.com.cn/f/diy/046/30/7038.htm

[SWISSCLOCKER]

hi guys

I am new at this forum and i have a question:

which 2gb kit should i buy?

or which chips are on 2gb kits like CORSAIR TWINX2048-3200C2??

thx

ps: :slapass: bad english sry I'm swiss

[high5]

hi guys

I am new at this forum and i have a question:

which 2gb kit should i buy?

or which chips are on 2gb kits like CORSAIR TWINX2048-3200C2??

thx

ps: :slapass: bad english sry I'm swiss
hi and welcome! :)

imho the best 2gb kit would be OCZ platinum EB pc4000.

as for Corsair, it depends on revision: v1.x is Infineon based, v2.x in Nanya.

[Wired-HoH]

OCZ platinum EB pc3200 timings: (LINK (http://www.ocztechnology.com/products/memory/ocz_ddr_pc_3200_platinum_enhanced_bandwidth_dual_c hannel-eol))
2.5-3-2-8

Corsair TwinX2048-3200C2 Timings: (LINK (CMX512-3200C2PRO ))
2-3-3-6 (*2.5-3-3-6 on AthlonXP systems)

[high5]

OCZ platinum EB pc3200 timings: (LINK (http://www.ocztechnology.com/products/memory/ocz_ddr_pc_3200_platinum_enhanced_bandwidth_dual_c hannel-eol))
2.5-3-2-8
whoops, i meant OCZ platinum EB pc4000 2gb kit. link (http://www.ocztechnology.com/products/memory/ocz_eb_ddr_pc_4000_2x1024mb_platinum_edition_dual_ channel_kit)

:slap:

thanks for the heads up wired. :up:

[Wired-HoH]

high5:
No problemo.

Swiss: Do you want to overclock at all?

[high5]

btw Wired, do you know could we expect Corsair to release XMS 3500LL 2GB in a non-Pro edition, w/o those leds?

[Bladesinger7x]

What chips are used on the Geil Ultra-X nForce4 Edition
http://www.geilusa.com/newsdetail.asp?linenumber=61

(I got a reply that they use the "elpida" chips:confused: :confused: )

Would this ram be any good on a DFI nF4 Ultra-D mobo?
(my CH-5 ram is on the road to oblivion:slapass: :slapass:)

[BiKEKiNG]

I have a corsair XMS3200C2PT and likely have a SAMSUNG TCCD 516

anyone know about the limits of this RAM?

[Wired-HoH]

I have a corsair XMS3200C2PT and likely have a SAMSUNG TCCD 516

anyone know about the limits of this RAM?

please don't double post.

http://www.houseofhelp.com/v3/showthread.php?t=44365

More likely TCCX.

[SWISSCLOCKER]

Swiss: Do you want to overclock at all?

hm... yes:D
OCZ platinum EB pc4000

i think thats a really nice kit, but it is a bit high priced

what about this:
http://www.ocztechnology.com/products/memory/ocz_el_ddr_pc_3200_dual_channel_platinum

[Wired-HoH]

Just keep in mind that 3200s aren't guaranteed by anyone to do higher than that speed (albeit most will by a little at least), hence why higher speeds are recommended.

FYI, the Corsair equivalent of that memory is the 3200XL series.

[SWISSCLOCKER]

Just keep in mind that 3200s aren't guaranteed by anyone to do higher than that speed (albeit most will by a little at least), hence why higher speeds are recommended.

FYI, the Corsair equivalent of that memory is the 3200XL series.

atm I have the corsair twinx 3200xl pro, but i need 2x 1gb :)

can i clock them -> http://www.ocztechnology.com/product...annel_platinum up to DDR500 with high latencies and higher voltage?! impossible?

[Wired-HoH]

Maybe. Basically, they rate them @ 400 Mhz. 25% OC may be possible, and everyone can guess what they may do based on ICs, PCBs, etc, but ultimately the best answer is a "maybe".

[Punisher!]

Finally I am going to try my GeIL Ultra-X TCCD on my new MSI Neo2 Platinum, but ARGH... I already have a problem before mounting it:

http://www.xtremesystems.org/forums/showthread.php?goto=newpost&t=84599

:censored: :dammit: :help:

[Comp-Freak]

Motherboard also works without I/O shield :banana:;)

[SWISSCLOCKER]

hm but DDR450 with Cl 2-3-3-6 should be possible?

(with the OCZ platinum kit, 2x 1GB, DDR400, Cl 2-3-2-5)

[g0dM@n]

Can anyone list a few of the top 2gb kit clockers? I may be making the move to 2gb soon, and wanted to know which I should be looking at... of course, I go for the better bang for my buck, but still would like to know what comparisons to make. :)

[-.-PhanTom-.-]

It seems to really be a case of pure luck finding a good pair of 2 X 1 gb overclockers :(
With the UUUC chips there seems to be seriously 3D stability problems on later chip batches which I, and others, and experiencuing with Mushkin Redline XP4000 > http://www.xtremesystems.org/forums/showthread.php?p=1218163
Haven't really looked into other brands yet...but if they use the same chips, the same issue is there...but gskill and corsair comes to mind...

This review mentions same issues> http://www.3dxtreme.net/index.php?id=oczebpc4000p4

[g0dM@n]

I still don't know if it's worth going to a 2gb kit.

Does it help that much with a dual-core??

[Delirious]

I just got a set of the OCZ pc4000 xtc and right now they are running 275 with 3-4-4-8 timings and 2.6v.

[thinkingbear]

With the UUUC chips there seems to be seriously 3D stability problems on later chip batches which I, and others, and experiencuing with Mushkin Redline XP4000 > http://www.xtremesystems.org/forums/showthread.php?p=1218163

This review mentions same issues> http://www.3dxtreme.net/index.php?id=oczebpc4000p4
I think you may be getting your IC's confused, I know I certainly have before. Both links you provide and the associated 3D stability problems refer to RAM based on newer batches of Infineon CE-6 based parts, e.g., OCZ EB PC4000, Mushkin XP4000 Redlines which do not overclock nearly as well as previous Infineon CE-5. Samsung UCCC based RAM is giving the higher overclocks right now but at the price of looser memory timings than what the Infineon parts will do at 250MHz. Hope that helps, so anyone contemplating the OCZ EB's or Redlines should not expect to see the same results as folks that bought theirs a month or more ago. BTW, the UCCC 2GB kits cost about $100 USD less than the Infineon 2GB kits. Right now I am really digging my $200 AMR Mushkin 2GB XP4000 non-Redline UCCC @ 275 MHz 3-4-4-8

[-.-PhanTom-.-]

I think you may be getting your IC's confused, I know I certainly have before. Both links you provide and the associated 3D stability problems refer to RAM based on newer batches of Infineon CE-6 based parts, e.g., OCZ EB PC4000, Mushkin XP4000 Redlines which do not overclock nearly as well as previous Infineon CE-5. Samsung UCCC based RAM is giving the higher overclocks right now but at the price of looser memory timings than what the Infineon parts will do at 250MHz. Hope that helps, so anyone contemplating the OCZ EB's or Redlines should not expect to see the same results as folks that bought theirs a month or more ago. BTW, the UCCC 2GB kits cost about $100 USD less than the Infineon 2GB kits. Right now I am really digging my $200 AMR Mushkin 2GB XP4000 non-Redline UCCC @ 275 MHz 3-4-4-8


Ahh thnx for clearing that up, mate! ;)
I guess in my frustration I didn't pay enough attention to detail....easy to get frustrated when you have paid top dollar for what you thought was a premium product and then it only goes a little over spec :(

[200%absolut]

a new add for the list

Twinmos Speed premium PC3500
ending code 1ACMT
Chips Hynix D-43

[200%absolut]

EL DDR PC3200 Gold --chip--> Winbond New BH5 ~ Brainpower PCB

you can add OCZ ref (OCZ4001024ELDCGE-K)

[high5]

a new add for the list

Twinmos Speed premium PC3500
ending code 1ACMT
Chips Hynix D-43
are you sure about that?

one member recently reported he got that ACMT and ICs were marked PSC which is Powerchip.

[200%absolut]

i have one stick in hand and it's hynix chip. Do you have more information about this ICs?
I receive this stick from twinmos RMA last week.

EDIT: after a quick search i've perhaps find the chips you are talking about :
Twinmos Twinmos Ram /w Sticker ending: CADT PowerChip


http://www.techpowerup.com/memdb/

[high5]

could you take a look at ICs on your TwinMOS and write down the entire label?

[200%absolut]

Twinmos
05036M
TMD7608F8E44F

[high5]

thanks.

i did search the forums a bit and now it seems i misunderstood the other member with ACMT TwinMOS. it seems his ICs aren't PSC labeled, but rather that his retailer told his they were PSC:

http://www.xtremesystems.org/forums/showthread.php?t=85046

http://www.xtremesystems.org/forums/showthread.php?t=49229&page=127
(starting from post #3170)

200%absolut, did you try OCing that TwinMOS of yours? 250MHz should be easy for Hynix.

[200%absolut]

i haven't tested it (P4P800Vm 2.65V max :( )
But if it the same chips as ADATA DDR500 250 will of course be easy
So we can update the list :D

[g0dM@n]

i haven't tested it (P4P800Vm 2.65V max :( )
But if it the same chips as ADATA DDR500 250 will of course be easy
So we can update the list :D
I thought that Hynix didn't really like much above 2.7v anyways... at least the D43s (both a 512 kit and a 1gig kit) and D50s I've had never liked much voltage... I think my 1gig kit worked well with 2.7v, and my 512mb kit worked well with 2.7-2.8v, but those were Kingston value, and Buffalo PC4200.

[Mean Machine]

Do any of you know what chips the XMS3200C2 v. 5.2 possesses? I've got a pair of those (which are going back to where I brought them), the test run I did got them up to 230MHz 2-3-2-5 1T, which was quite nice for what I paid for them.
But the chips remain the question, I'm just a bit curious.

[200%absolut]

what was the Vdimm ? Have you try 2/2/2/5 ?

[high5]

Do any of you know what chips the XMS3200C2 v. 5.2 possesses? I've got a pair of those (which are going back to where I brought them), the test run I did got them up to 230MHz 2-3-2-5 1T, which was quite nice for what I paid for them.
But the chips remain the question, I'm just a bit curious.
ProMOS.

[Mean Machine]

ProMOS.
Never heard of it... I'll do some googling, I think. But thanks for the answer.

[antonio]

I got a 1GB kits from Kingston and it is a KHX 3200AK2 which supposed to be CH 5 chips...infact i found out that it is CE 5(from infineon) week 46 05.... :(

[high5]

Never heard of it... I'll do some googling, I think. But thanks for the answer.
i personally know some people who OCed that v5.2 Corsair upto 240-250MHz, so its not as bad as it sounds... :p:

[g0dM@n]

Correction on...
"EL DDR PC3700 Platinum Edition (2-3-3-8) --chip--> Samsung TCC5 (new production) ~ Brainpower PCB"

I just took a peak under my spreader and it's definitely "TCCD"! Not to say that they are all TCCD, as I wouldn't know, but mine is for sure TCCD.

Mine: OCZ DDR EL PC3700 Platinum Edition (2-3-3-8) --chip--> Samsung TCCD

[antonio]

Correction on...
"EL DDR PC3700 Platinum Edition (2-3-3-8) --chip--> Samsung TCC5 (new production) ~ Brainpower PCB"

I just took a peak under my spreader and it's definitely "TCCD"! Not to say that they are all TCCD, as I wouldn't know, but mine is for sure TCCD.

Mine: OCZ DDR EL PC3700 Platinum Edition (2-3-3-8) --chip--> Samsung TCCD

lucky u,

i did also take a peek and i found infineon i/c in my kits....damn!! i'm burning them at 3.41v right now....:banana:

[g0dM@n]

What kits? The same ones I have? I thought they were all Samsung TCC5 (and also TCCD now that I verified).

What infineon chips are they, and how do they perform? 3.41v?!

[antonio]

What kits? The same ones I have? I thought they were all Samsung TCC5 (and also TCCD now that I verified).

What infineon chips are they, and how do they perform? 3.41v?!

CE-5 and it is rubbish....3.41 only stabilize around 235mhz with 2.5-3-2-5,

i was hopping getting a CH's but finally opened up the HS only to find an Infineon chip is inside...

[KibaSkinner]

GEIL Value PC3200 Blue is that truth that is coming with new BH5/UTT??

[Mean Machine]

GEIL Value PC3200 Blue is that truth that is coming with new BH5/UTT??
Now, if someone can confirm that, I'm out the door and off to the store.

[DevilFish]

First of all : Punisher thanks for starting this thread :)
And now my question : i have an offer where i can get Vitesta 566 and 600 quite cheap, and they still are decent memories are´nt they ?
Buy or not buy... thats the question :p:

[stone_cold_Jimi]

Got a G.Skill 2GB HZ kit today and retired my Ballistix Z503 for special occasions. If they're any good, I'll be sure to post here.

[alpha0ne]

Got a G.Skill 2GB HZ kit today and retired my Ballistix Z503 for special occasions. If they're any good, I'll be sure to post here.

More than happy with my set Jimi, good luck :)

[Print]

a question which are these sigles better?
v-data pc3200 -5b 20xxx or
v-data pc3200 -5b 80xxx

thank's

[pl4y3r]

GEIL Value PC3200 Blue is that truth that is coming with new BH5/UTT??
Yes... but u must look under the HS first and check it :D :stick: winbonds have 2 nipples :dammit: :kittenhat

---------
Team Group ASTAK 2x256 DDR 400 CL=2-2-2-5
New BH-5
chip photo - http://img526.imageshack.us/img526/5205/cl2koscbig2sw.jpg
---------
Team Group ASTAK 2x256 DDR 400 CL=2.5-3-3-6
Nanya 5T
chip photo - http://img526.imageshack.us/img526/9103/cl25koscbig2kh.jpg
---------

2 new

[halo112358]

I've got a couple sticks of patriot pep5123200LL here, they're both winbond CH-6. Unfortunately my photography skills are teh suck after a couple of drinks, so my photos of the ram sans heat-spreaders didn't come out so well.

[joek71]

Hi guys

I am new here. I have this mem: Patriot PDC5123200+XBLK\PDC1G3200+XBLK (2-2-2-5) --chip--> Samsung TCCD ~ Brainpower PCB .
Is it good quality mem?

thanks,
Joe

[Smy]

OCZ 2048MB Dual Channel Gold XTC
PC-4000 1024MB x 2 (3-4-3-8) 500 MHz

Is this samsung ucc?

[snatchmonkey]

Hi guys

I am new here. I have this mem: Patriot PDC5123200+XBLK\PDC1G3200+XBLK (2-2-2-5) --chip--> Samsung TCCD ~ Brainpower PCB .
Is it good quality mem?

thanks,
Joe

I've got some it's good stuff and well priced. I know someone who can get his to well over 300fsb on his DFI SLI-D, highest I got mine was 275 but that was on a s478 intel so was most likely the motherboards max.

[Mean Machine]

What about the v5.3 Corsair XMS3200C2? Same PROMos crap as i bought the last time? I'll get them very cheaply, but I won't waste my money on that crap again if it ain't TCCD or something worthwhile.

Btw, Geil Value isn't UTT, found out that the hard way. ;)

[winters]

I buy few days ago a kit of 2x512 of Crucial Ballistix PC3200 Micron 5b-g, and works very well and O.C well too:
225 mhz 2-2-2-6 with 2,80 V in bios DFi; real: 2,93 V
250 mhz 2,5-2-2-7 with 2,80 V in bios DFI; real: 2,93 V
270 mhz 2,5-3-3-7 with 2,80 V in bios DFI, real: 2,93 V
I think that the new PC3200 works better than PC4000, Crucial fix the problem off die memory modules. :fact:

[-Wolverine-]

OCZ 2048MB Dual Channel Gold XTC
PC-4000 1024MB x 2 (3-4-3-8) 500 MHz

Is this samsung ucc?


yes that has samsung UCCC

GEIL Value PC3200 Blue is that truth that is coming with new BH5/UTT??

yes it is truth but it is very rear...U have to look at the chips

[Malachia]

sorry guys i have a pair of Corsair 3200C2 PRO rev 5.3, nobody can tell me what kind of chip they mounts? thx in advance!

[Comp-Freak]

Go to the house of help corsair support forums. And post here:

http://www.houseofhelp.com/forums/showthread.php?t=44365

They can tell you what chips on your ram.

[g0dM@n]

GEIL Value PC3200 Blue is that truth that is coming with new BH5/UTT??
New BH5/UTT... what do you mean "new"... as in a different (better) batch of UTT is on its way?

[stone_cold_Jimi]

Someone on another forum was talking about getting a G.Skill FF 2GB kit. The specs looked great.... but I'm sure it's a 1GB kit. Anyone know if a FF 2GB kit exists? Can't find one on the G.Skill site.

[matrs]

corsair C2PT rev 6.3 what chips have? i looked information about this but dont found something.
maybe ramguy will are a better place to ask :slap:

[joek71]

Getting 2Gb Kit Team Xtreem Cronus 3-3-3-8 PC4000 (Micron), hopefully it will improve my oc, did anyone get these babies yet?

[Wired-HoH]

corsair C2PT rev 6.3 what chips have? i looked information about this but dont found something.
maybe ramguy will are a better place to ask :slap:

2 posts up man!
Official Corsair IC Inquiry Thread (http://www.houseofhelp.com/forums/showthread.php?t=44365) @ The House of Help (http://www.houseofhelp.com/forums/)

[Fottemberg]

XMS-PC3200LL Rev 2.1 (2-2-2-6-1T) can be TCCD first series.

[Wired-HoH]

XMS-PC3200LL Rev 2.1 (2-2-2-6-1T) can be TCCD first series.

You are incorrect. On the Official Corsair IC Inquiry Thread (http://www.houseofhelp.com/v2/showthread.php?t=44365):

The only 3200LLs that have TCCDs so far are:

CMX512-3200LLPRO v3.1 0427034-2 = Samsung TCCD
Twinx512-3200LLPT XMS3205 V3.1 0444035-7 = Samsung -5 TCCD

Those date codes are around when 3200XLs started coming out and were replacing the 3200LLs.

[sergiu]

Does anyone know what chips are in 512Mb modules Kingston KVR4003A? (on chips is written "D3208DLECTG5AU")
My modules are made on Week1 06 and work at 400@2-3-2-5 and at 533@3-4-3-7 with 2.55v. Raising the voltage to 2.85 doesn't help. I'm limited by CPU FSB, I think speed can be higher.

[Micutzu]

Might be low-grade Infineon/Aeneon chips ... a close-up pic might reveal who manufactured them, but i doubt it'll help you very much since you already know what they can do :).

[@_dud]

That's a hella-long list. :D
Thanks.

[Fayt_Leingod]

Just a little quarrel with this line;
HyperX PC 3200AK2 (2-3-2-6-1T) (KHX 3200AK2) --chip--> Winbond CH-5

My own set contains Infineon CE-6 - i'll provide a picture if i can find my digi camera. :?

[Miravo]

My set od KHX PC3200A contains CE5 when I took off the heatspreaders ;) But they suck to OC :(

[Comp-Freak]

i'll provide a picture if i can find my digi camera. :?Yes please! I've got also that mem, but one thing is for sure, no winbond chips!

My ram:
http://www.xtremesystems.org/forums/attachment.php?attachmentid=36252&stc=1

[Fayt_Leingod]

Just to let you know i havent disappeared - my mum has the digi camera. ill see if i can get em done by a weeks time.

[Comp-Freak]

Ok, thnx :)

[Binh]

I have a 1GB stick of Corsair Value Select VS1GB400C3 (see the pic below), it can do 240@3-3-3-8 at 2.8V (at 2.6V it can do 234MHz). It definitely don't like CAS 2.5 because I was able to manage only to 205@2.5-3-3-8. Looser timing (xx-4-4-8) does not impove OC result. Changing subtiming with A64tweaker does not help too.
I am wondering, what chips I have on the stick ? I guess it can be Powerchip or Nanya?

[Binh]

After reading some review I have a conclusion that the chips on my Corsair VS1GB400C3 are actually MICRON 5B-D though they don't look like other 5B-D but the small 4 character like HKDZ on the chips and characters of oveclocking point to this conclusion.

[Wired-HoH]

After reading some review I have a conclusion that the chips on my Corsair VS1GB400C3 are actually MICRON 5B-D though they don't look like other 5B-D but the small 4 character like HKDZ on the chips and characters of oveclocking point to this conclusion.

Not even Corsair tracks the ICs on VS sticks, so GL with the IC identifying :)

[viper650]

i am highly confused by all these rams, yet no one ever links to where you can buy the products. can someone please link me to a good set of either 2x512 or 2x1gb sticks that will do 300mhz+- for a dual core opteron/ DFI LANPARTY nF4 SLI-DR.

[Wired-HoH]

i am highly confused by all these rams, yet no one ever links to where you can buy the products. can someone please link me to a good set of either 2x512 or 2x1gb sticks that will do 300mhz+- for a dual core opteron/ DFI LANPARTY nF4 SLI-DR.

DDR600's not a highly wanted thing, and is costly to make, ergo hard to sell, hard to find.

OCZ makes some 300 Mhz memory IIRC.

[viper650]

DDR600's not a highly wanted thing, and is costly to make, ergo hard to sell, hard to find.

OCZ makes some 300 Mhz memory IIRC.

yeah, i meant that i would like them to do 300mhz OC'ed... ddr500 is fine, as long as i can hit 600 speeds.

[kenofstephen]

NOPE. A-Data 566 and 600 ARE TCCD SURE @ 100%.

please also add my 100%

[deadlock7]

Guys i've found 2*512 Alienware 2-2-2-5 memory sticks with headspreader.Does anyone know what chip they have?I don't know their speed..

[BigAndy]

Hi guy's!

I have 2 sticks of Samsung RAM PC3200 (2x512). Info on chips is:

SAMSUNG 543
K4H510838C-UCCC

It's some kind of value RAM, but does anyone know what is capable on???

And is Samsung UCCC chips is any good? What can i expect from this RAM?




Cheers





P.S. My 1st post on XS :D

[g0dM@n]

Samsung UCCC chips are one of the best, and most common chips on 2gb kits (1gb sticks).

Funny thing is that I didn't know that they came in the 512mb flavors...

[Fayt_Leingod]

Well it took long enough, but i finally have pictures.

First and foremost i MUST appologise - I forgot about my mother's terrible digital camera.

Secondly - i just plain suck at photography.

Here's the barely visible infineon CE-6;
http://i17.photobucket.com/albums/b79/andyboy_101/100_0206.jpg

(I'll definitely be doing a re-shoot when i get time inbetween studies, work, and fixing this damn computer :P)

[Comp-Freak]

Do they look the same from the side as mine?
http://www.xtremesystems.org/forums/showpost.php?p=1401727&postcount=629

Thnx

[scorp]

TWINX2048 XMS-PC3200C2PT Rev1.2 (2-3-3-6) : Nanya 5 Rev.B; they do 2-3-2-5-1T at 200 MHz with 2.6v; no CO results as I bough them to run them at 400MHz

[Fayt_Leingod]

Do they look the same from the side as mine?
http://www.xtremesystems.org/forums/showpost.php?p=1401727&postcount=629

Thnx

Yeah they look alike - exactly alike, i can't tell. I just knelt down and had a look - poor lighting + rat's nest wiring job = makes it hard to tell. :P

[Wired-HoH]

TWINX2048 XMS-PC3200C2PT Rev1.2 (2-3-3-6) : Nanya 5 Rev.B; they do 2-3-2-5-1T at 200 MHz with 2.6v; no CO results as I bough them to run them at 400MHz

Not concrete at all. Lot #s are also needed to state what ICs they contain.

[macaddict]

Anxious to see the 1GB stick results!

[matieches]

what timings recomend for Corsair Value Select 2x512Mb 400Mhz, Chip VS32MB-5 PS1300505 Latency 2.5-3-3-8 Stock, i dont find the timings stable at 225Mhz ! The chips is VS32MB-5 PS1300505.

[gsan]

Mushkin PC3200 Level II, does it BH5 or BH6 ?

http://img.photobucket.com/albums/v235/gsan_bot/DSCN3197.jpg

http://img.photobucket.com/albums/v235/gsan_bot/DSCN3201.jpg

[PowerToTheUsers]

Just a little quarrel with this line;
HyperX PC 3200AK2 (2-3-2-6-1T) (KHX 3200AK2) --chip--> Winbond CH-5

My own set contains Infineon CE-6 - i'll provide a picture if i can find my digi camera. :?
This is the 256/512MB-list, I guess you have a stick of 1GB, which does contain infineon chips.

[Fayt_Leingod]

This is the 256/512MB-list, I guess you have a stick of 1GB, which does contain infineon chips.
No, I have 2x512MB sticks. :P Don't make me take another photo - i'm ashamed of the one i've already posted. :p:

[Punisher!]

LIST UPDATED WITH 1GB STICKS DATABASE THANKS TO RE-VOODOO!!! :fact:

:D

[farksy]

LIST UPDATED WITH 1GB STICKS DATABASE THANKS TO RE-VOODOO!!! :fact:

:D
Great to see those. Have been searching aroudn but didn't have much luck =D

[_damien_]

A nice addition indeed! :clap:

But I have a question:

Are you sure that Hynix D43, Hynix D50 and Samsung TCCC chips are used in 1GB modules? I was under the impression that they're all 32Mx8 chips, thus limiting the module capacity to 512MB. Or did I miss something?

[Punisher!]

A nice addition indeed! :clap:

But I have a question:

Are you sure that Hynix D43, Hynix D50 and Samsung TCCC chips are used in 1GB modules? I was under the impression that they're all 32Mx8 chips, thus limiting the module capacity to 512MB. Or did I miss something?

TCCC are used for sure... I saw and tried with my eyes 1GB modules with TCCC. For the rest I'll ask re-voodoo! :p:

[najfeld]

You should add PDP Patriot LLK 2x512 Patriot PDC1G3200LLK (2-3-2-5) as Samsung TCCD, TCC5 (new production) on Brainpower PCB, Mosel Vitelic 5ns (few reports), Aeneon AED93T500 - normal PCB, Micron -5B C.
I have photos if You want (i can post it later) of TCCD, TCC5 (i can make), and aeneon. About micron i know from patriot technical support.

[JeanY]

hello, really good job :)

but i think you done a mistake :

"F1-4000USU2-
2GBHZ - Samsung UCCC + Brainpower PCB
F1-4000USU2-2GBHZ - Infineon CE-
6 + Brainpower PCB"

i think you mean HV ;)

[PowerToTheUsers]

You can find some more 1GB-modules on my list I published over here: http://games.telenet.be/forum/showthread.php?t=411918

[Cooper]

F1-4000USU2-2GBHZ - Infineon CE-
6 + Brainpower PCB

Are you kidding ?

[Punisher!]

hello, really good job :)

but i think you done a mistake :

"F1-4000USU2-
2GBHZ - Samsung UCCC + Brainpower PCB
F1-4000USU2-2GBHZ - Infineon CE-
6 + Brainpower PCB"

i think you mean HV ;)

Nah... no mistakes from me... list belongs to re-voodoo.

For error reporting please use: cavodamage@tin.it

[Nil Einne]

Is it possible to tell the difference between a brain power PCB and a JEDEC reference PDB by looking at the RAM stick (without heatspreader). Because you can tell the RAM chips (obviously) but it would be good if there is a reliable way to tell what the PCB is too.

[Nil Einne]

Hey Punisher, I've asked Transcend and they've confirmed they use both Samsung UCCC and TCCC for their PC3200 1gb Samsung line.

Also, the info on Corsair value RAM 1gb appears incorrect. According to Corsair, their Value Select line is procured at the wafer level and packaged by Corsair http://www.houseofhelp.com/forums/showthread.php?t=44365

Therefore, saying they are Micron 5B-D or Samsung UCCC or whatever seems incorrect.

[graham_h]

anyone have details on the 2x2GB kits coming out from Geil ?

They're due in Australia in two weeks time

[Punisher!]

Hey Punisher, I've asked Transcend and they've confirmed they use both Samsung UCCC and TCCC for their PC3200 1gb Samsung line.

Also, the info on Corsair value RAM 1gb appears incorrect. According to Corsair, their Value Select line is procured at the wafer level and packaged by Corsair http://www.houseofhelp.com/forums/showthread.php?t=44365

Therefore, saying they are Micron 5B-D or Samsung UCCC or whatever seems incorrect.

LOL... man you have to distinguish between memory producer and memory ditributor:

- Corsair, GeIL, Trascend, etc. are memory distrubutors, THEY DO NOT PRODUCE ram chips.

- Samsung, Hynix, Micron, etc. are memory producer, THEY DO NOT DISTRIBUTE ram chips, but they produce them for distributors.

Anyway for Trascend 1GB I think re-voodo will add TCCC too soon.

[Punisher!]

For error reporting (dealing with 1GB stick listing) please use: cavodamage@tin.it

I know there are some errors but your Puni doesn't matter anything ;) :D.

[farksy]

LOL... man you have to distinguish between memory producer and memory ditributor:

- Corsair, GeIL, Trascend, etc. are memory distrubutors, THEY DO NOT PRODUCE ram chips.

- Samsung, Hynix, Micron, etc. are memory producer, THEY DO NOT DISTRIBUTE ram chips, but they produce them for distributors.

Anyway for Trascend 1GB I think re-voodo will add TCCC too soon.
I can confirm CTP-D43 are found on 1Gb sticks. Saw them a few days ago.

[kiwi]

What chips new hyperx KHX3200AK2 have? They are still for sale and they used to be old school CH-5 but now I can only guess they are new UTT ch5

[Darklord]

I dont know if this has been reported but Transcend based UCCC can churn out some insane nos.

Here you go ,
http://valid.x86-secret.com/show_oc.php?id=79876

http://img91.imageshack.us/my.php?image=general285ghz0gb.jpg

This isnt stable but benchable.I say good enough for Transcend,isnt it ?

[Lane-k]

Someone have info about the chip used on the Corsair TwinX2048-4400CL3 Pro, i have heard Infineon.. Hynix. i know the 2048-4000PT seems use UCCC, but for the 4400 i don't know..

[Nil Einne]

LOL... man you have to distinguish between memory producer and memory ditributor:

- Corsair, GeIL, Trascend, etc. are memory distrubutors, THEY DO NOT PRODUCE ram chips.

- Samsung, Hynix, Micron, etc. are memory producer, THEY DO NOT DISTRIBUTE ram chips, but they produce them for distributors.

Anyway for Trascend 1GB I think re-voodo will add TCCC too soon.

I think you misunderstand me. I know the difference. I think I misunderstood what Corsair were saying but I think you misunderstood what I was saying

My original understanding was that Corsair were saying THEY purchased all their memory for the Value line at the wafer level and then had them packaged as memory chips, put these on memory modules and tested these themselves. If this were the case, then NONE of the memory chips would be marked with Samsung or whatever. My understanding is if the chip is marked Samsung, then it means it has been packaged and tested by Samsung. They will be unmarked or perhaps marked with the Corsair brand or some other brand which Corsair uses to mark their memory chips if they are purchased at the wafer level and not tested and/or packaged by Samsung. However I believe I was incorrect, this is not what they were saying

My understanding now is that what Corsair is saying is they do not buy the RAM as chips and then put the chips on to modules. Instead, they tell someone what they want and the specifications they want. This could be Samsung or whoever. Samsung then packages and tests the chips, puts them onto modules and tests these and label the memory module. As these memory chips are tested and packaged by Samsung, they are marked as Samsung (or whatever). However because Corsair does not source the chips but instead the modules, they cannot use revisions etc to differentiante between modules with different chips.

N.B. In practice, when I say Corsair/whatever does something, I of course mean someone operating for Corsair/whatever.

In any case, Corsair modules can also come with Nanya chips, see this link http://www.3dgameman.com/forums/showthread.php?t=42752

P.S. When I say memory chip, I mean memory/RAM IC. It's the same thing. I refer to the memory module as memory/RAM module or memory/RAM stick

[Nil Einne]

Lane, have you tried asking at the houseofhelp
http://www.houseofhelp.com/forums/showthread.php?t=44365

[dmo580]

where are OCZ's PC-4000 Platinum 2x1gb / 2x512mb? I don't see those.

[-Wolverine-]

@Punisher
I've got some info on some RAM modules that R not on the list

like
OCZ PC3200EL Titanium Edition should be Infineon CE-5
PC4000 Platinum Edition XTC - Micron -5B F

Patriot
Signature line
PC3200 (PSD2G400K) - have some info that could be Hynix on and some say Infineon CE-6 (if U can check that)
Extreme Performance line
LL
PC3500LL (PDC2G3500LLK) - Infineon CE-5 + Brainpower PCB
EL
PC3200EL (PDC2G3200ELK) - Samsung UCCC + Brainpower PCB

SuperTalent
PC3200 C3 - Samsung UCCC

[Luis_GT]

Someone have info about the chip used on the Corsair TwinX2048-4400CL3 Pro, i have heard Infineon.. Hynix. i know the 2048-4000PT seems use UCCC, but for the 4400 i don't know..


Yeah, I want to know what kind of chips the Corsair TwinX Pro 4400 has, I've heard that they are infineon, other than that no clue.

[Wired-HoH]

Someone have info about the chip used on the Corsair TwinX2048-4400CL3 Pro, i have heard Infineon.. Hynix. i know the 2048-4000PT seems use UCCC, but for the 4400 i don't know..Yeah, I want to know what kind of chips the Corsair TwinX Pro 4400 has, I've heard that they are infineon, other than that no clue.

Like Nil Einne linked to, the only place you should be asking about Corsair ICs is at Corsair's Official Forum, specifically at their IC Inquiry Thread (http://www.houseofhelp.com/forums/showthread.php?t=44365). You'll need to post your part # / version # / lot # there. Only with those three pieces of information can Ram Guy tell you EXACTLY what ICs your memory has.

[Luis_GT]

Like Nil Einne linked to, the only place you should be asking about Corsair ICs is at Corsair's Official Forum, specifically at their IC Inquiry Thread (http://www.houseofhelp.com/forums/showthread.php?t=44365). You'll need to post your part # / version # / lot # there. Only with those three pieces of information can Ram Guy tell you EXACTLY what ICs your memory has.

Thanks, I'll try that :cool:

[Lane-k]

I have make a Inquiries for know the exact chip use on the 2048-4400C3 ( like you have recommend it to me).. For what i know it's Infineon die C.

[Nil Einne]

My Corsair Valueselect 1gb x 2 memory chips are Corsair branded
Corsair 64M8BDCG PRB0900614

[Roger_D25]

Hey Guys,
About a year ago I traded my PQI Turbo Platinum DPU (2 x 512mb) modules to a friend for his GEIL Ultra X (2 x 256mb) engineering samples (was told it was BH-5 but don't think so). Ever since I actually got the RAM I've been trying to find info on them with no luck.

Well the other day I found this (http://www.anandtech.com/showdoc.aspx?i=2174&p=2) article from Anandtech on the GEIL Ultra X (2 x 256mb) modules. At first I was excited because I thought I found it. After pulling the heatspreaders off my modules I realized they were very close but a couple of the numbers don't match. Plus if you look at the picture I took of the IC's on my modules you'll notice that mine have the two dimples that UTT modules have unlike the ones in the article which don't have any dimples. The only info I have been told is that their "engineering samples" and from looking at the IC it looks like their 3.5ns chips?

I wanted to post here becuase out of all the forums I frequent you guys know the most about higher voltage memory! Plus since I've been unsure about what these modules actually are for so long I really want to know so I can use them to their full potential! If anyone has any info about this RAM please fill me in. Then I can start testing them and see what their capable of! Thanks guys for you help and time.

http://img127.imageshack.us/img127/8662/one3us.th.jpg (http://img127.imageshack.us/my.php?image=one3us.jpg)

http://img67.imageshack.us/img67/1268/four3nf.th.jpg (http://img67.imageshack.us/my.php?image=four3nf.jpg)

http://img129.imageshack.us/img129/1574/five0ch.th.jpg (http://img129.imageshack.us/my.php?image=five0ch.jpg)

http://img155.imageshack.us/img155/8209/six6ff.th.jpg (http://img155.imageshack.us/my.php?image=six6ff.jpg)

[Comp-Freak]

I'd say they are winbond based chips. They have 2 round spots, 2 metal "strips" on the side from the chip and the little pin1 marker spot. Not 100% sure. Can't tell you what kind of winbond they are.

[Roger_D25]

Thanks for the reply Comp-Freak, much apprecaited! I've learned a bit more since that post. I talked to the original owner and he said that although they have almost the same writting on them as the regular Ultra X kits these are indeed a special one-off kit with what he swears are BH-5 IC's. From what you said about the actual chips I'm starting to think they might actuall be just that?

Being an engineering sample that he got from GEIL from someone he knows they might have just printed those numbers on it even though they might actually be 5ns chips? Who knows, but thanks again for your help. Hopefully more people will chime in with their thoughts and opinions!

[WiCKeD]

GeiL relabeled some of those Winbond chips. Scrape off a layer of silicon and you can find out! Probably kill the mem though. ;) That's how it was initially proven. I believe they were all BH-5 though.

[Lane-k]

Ok.. after my Inquiry to Corsair about the chip on TwinX2048-4400C3, i have just this info :

- TWINX2048-4400PRO XMS4401 v1.1 0614288-7 = INFINEON, 64MX8, CL 3, Die Rev C
- CMX1024-4400PRO XMS4401v1.1 0608065-1 = INFINEON, 64MX8, CL 3, Die Rev C

someone have more precision?

( Edit: - i think have read on front page the Corsair XMS i m talking about is marked like Samsung UCC, a little add to do?
the link to Corsair Inquiry thread with the chip on the Kits..:
http://www.houseofhelp.com/forums/showthread.php?t=44365 )

[nystylin74]

I'm looking to get more RAM to OC my system, I'm OCing it by 200Mhz now but that's as far as it will go with the Current RAM. Any suggestions?

Now, I've been talking to Lane-k about this but what does everyone else think about it?
Lane, not that I don't trust or value your opinion, but 2 heads are better than one.

P.S. Thanks for the help Lane, wouldn't be postin w/o you.

[Demo]

Can anyone point me to that article from DFI forums where they got all those bunch of timings layed down and explained in detail to as what each does

[freakBYnature]

1GB STICKS RAM LISTING:
[1GB STICKS RAM LIST by re-voodoo (THANKS!)]
[FOR ERRORS BELONGING TO THIS LIST PLEASE REFER TO cavodamage@tin.it FOR YOUR REPORT]

Corsair


XMS-PC4000 Rev 1.1 - Samsung UCCC
XMS-PC4000-TWINX2048-4000PT - Samsung UCCC +
Brainpower PCB

What does this mean for me... I have XMS-PC4000-TWINX2048-4000PT ... and this says Samsung UCCC + Brainpower PCB. Does this in reality mean that the chips on mine are mixed up in some sort of way? Would be very happy for an answer since it seems mine don't go over 500mhz without rebooting and such *c*r*a*p*... or failing memtest86 over 500mhz.

Would I actually be better off bying me some unpaired sticks of XMS-PC4000 Rev 1.1 for overclocking potential? I don't quite get this, please help me someone! :stick:

The reason for asking is that I have (as you see below) seriously overclocked my cpu, but my ram should be somewhere in the reading of 500mhz, but since i can't get them over 500 i have to drive them at 466mhz, that's really boring... have tried 1T and 2T, but there is no difference at all in the clocking, so i put them on 3-4-4-10 1T to be able to make it steady and I don't think it's that good at all since i can't get them over stock mhz.... HEEEELP!!!! :eek: :eek: :eek:

[freakBYnature]

I found out on http://www.houseofhelp.com/forums/showthread.php?t=44365

TWINX2048-4000PT XMS4000 v1.1 0540080-1 = Samsung -5 Rev C 64M X 8
or
TWINX2048-4000PT XMS4000 v1.1 0602105-1 = Samsung 64m X 8 Rev C
or
TWINX2048-4000PT XMS4000 V1.1 0608017-2 = Samsung -5 Rev C 64M X 8

Which of these are any good? Is it dangerous to remove the heatsinks attached to them to see whic numbers are on mine, could I destroy the chips?

I'm really happy for any replies.

[breakfromyou]

somebody find out what kind of IC's the Patriot 2x512mb LLK kit uses. im dying to find out, but nobody has it and reviews for the stuff are hard to come by.

[Try-this]

I'm sitting here with some Kingston HyperX PC 3200ULK2/1G, and then I find this at the ram list:


HyperX PC 3200ULK2 (2-2-2-5-1T) (KHX 3200ULK2) --chip--> Samsung TCCD


So I wonder, are my ram TCCD? or could it be some other chips? - I do not have a possibility to test these at the time...

[LordofDoom]

Can anyone identify the chips on the 2x512mb kit Corsair PC-3200 C2PT? I am unsure of the revision, I'm asking for a friend, and he can't tell the rev. Timings are also unsure but likely 2-3-2-6 1T

Thnx
-Satan

[Wired-HoH]

Can anyone identify the chips on the 2x512mb kit Corsair PC-3200 C2PT? I am unsure of the revision, I'm asking for a friend, and he can't tell the rev. Timings are also unsure but likely 2-3-2-6 1T3200C2 timings are 2-3-3-6-1T.

If you know the part # / version # / lot # of the stick, you can post here to get an accurate answer as to what IC they use:

The Official Corsair IC Inquiry Thread (http://www.houseofhelp.com/forums/showthread.php?t=44365)

[LordofDoom]

Yeah, but remember, he can't tell the revision. Also C2PT is different from C2.

-Satan

[Wired-HoH]

Yeah, but remember, he can't tell the revision. Also C2PT is different from C2.Without that info, it's impossible to tell (without ripping off the heat spreaders and voiding the warranty) what ICs they use.

Also, C2 and C2PT are identical in terms of specs. C2 = black colored heat spreaders, C2PT = platinum colored heat spreaders.

[PoCko_BG]

i've red a lot of the forum and i've got tired.
Pls i have
Corsair TWINX1024-3200C2 2xCMX512-3200C2 XMS3202V5.2, 0634191-0

I found this on the net
TWINX1024-3200C2 XMS3202 V.5.2 0541017-0 = Promos -5 Rev A
CMX512-3200C2 XMS3202v5.2 0540107-0 = PROMOS 32Mx8 0.12u ETT
CMX512-3200C2 XMS3202v5.2 0607346-1 = PROMOS 32Mx8 0.12u ETT

What does these mean? Whith what kind of chips are they? How well do they clock? And How!!!

PLS Help me?

PS: Sorry for my english :)

[Wired-HoH]

You'd need to post in the thread I mentioned earlier to get a concrete answer as to what IC your memory has.

[Sword]

:toast: good job on the list and updates.
just for confirmation the A-Data pc 3200 1 gig sticks are Samsung UCCC?
Doh,Never mind!yeah I must have been a little tired and did'nt read the entire list through,ended rmaing the Adata.

[ziddey]

lol the title needs to be updated or something. I got all excited haha

[Spyrus]

Add also 2x1GB Transcend PC3200 with Micron 5B-D ~ Brainpower PCB that i have found lately

[Timbosan]

Just came across an old corsair value select PC3200 512mb stick thats now doing 500 MHz @ 2.7v orthos stable. Code on the IC's is 64M8BDCG & under that is PRB0900622. They have a small circle dent in the lower right hand corner.
Has the letters 'BP' in the middle on the back of the stick.
Any idea what IC's they are?

[Wired-HoH]

Just came across an old corsair value select PC3200 512mb stick thats now doing 500 MHz @ 2.7v orthos stable. Code on the IC's is 64M8BDCG & under that is PRB0900622. They have a small circle dent in the lower right hand corner.
Has the letters 'BP' in the middle on the back of the stick.
Any idea what IC's they are?


Corsair doesn't keep track of ICs for VS, so GL there :)