Mach 2 Evaporator, Heatpad

[Sidewinder]

I started to reawake my Mach 2 Unit from France, after i opened the Case of the Evaporator, i noticed that the Heatpad is dead - just burned down :D

Well, iam not sure if i will need a new heatpad (since i dont know how to calculate this) and i dont have the time to do this 2 times, so im asking here.
Could anyone with a Mach 2 (R134a, R404a, tell me please, temps also) shut off the Heatpad and have a look for condensation/temps at the case of the evaporator? Its the red cable, plugged in with a standard TAM-Plug on the Board.

[Firefoxx]

I also had a mach2 with a dead heatpad, had a bit condensation, but with a piece of a jeans i could solve the problem ;)

[buffarilla]

amazing

[Sidewinder]

I also had a mach2 with a dead heatpad, had a bit condensation, but with a piece of a jeans i could solve the problem ;)
the upper or lower heatpad (lower heatpad, the one under the mobo)?

[Firefoxx]

Oh, it was the upper heatpad inside the Evaporator...

[Sidewinder]

Mh, that means i would sure get condensation at the outside, thank you ;)
well, have to look for a heatpad