software for mach 1 ?

[ibby]

does mach 1 come with any software, to change the settings in windows ?
:confused:
for the fans etc or any other montring software ?

Ibby

[C3]

No notting...You`re just able to configure the fans with the controller at the front.

[ibby]

right.
:(

[bias_hjorth]

No thats good ;)Who needs all that electrical mombojumbo anyway :p:

[ibby]

id like to see whats happing with my mach .. ;)
dot understand the dail settings, so ive left them stock.

[mike.elmes]

id like to see whats happing with my mach .. ;)
dot understand the dail settings, so ive left them stock.
You can do some pretty amazing things with these things stock. All you need is to change a couple of fans and run the fans flat out to see some improvements in temps :) Also, re-gas the unit and watch those temps drop.

[ibby]

any setting I should set on the mach ?
I mean fan speed ?

How about if I cut the side of the cases and install 120MM fans ... pulling air out ?

will that help ? or is it better to start changing the setting on the unit its self ?

[mike.elmes]

any setting I should set on the mach ?
I mean fan speed ?

How about if I cut the side of the cases and install 120MM fans ... pulling air out ?

will that help ? or is it better to start changing the setting on the unit its self ?
There are many people here who modded their mach 1. I have left mine stock. The unit has a fan drawing air through a rad. When you first fire it up it just screams and runs at a much higher setting until you hit -33c then it drops down. For benching it nice to run the fans flat out, the rear fan helps keep the cooler air running over the compressor which gets VERY hot, and then exits the case. The higher the CFM the fans are the better. More air through the rad and over the compressor the better. Maybe someone can chirp in with the model # of which fan is an improvement over the stock set-up. There is a way to run the fans flat out for benching but I never bother.
Someone around here will surely fill us in.
What are you cooling with that new toy??

[ibby]

well .. a p4 :D
3 gig @ 4gig stock
can get 4.2 stock but a little flakey

[mike.elmes]

well .. a p4 :D
3 gig @ 4gig stock
can get 4.2 stock but a little flakeyCertainly respectable, but the core is not going much beyond that even if you cool it 10 degees more. Might be more overclockable to find better ram or a motherboard you can voltmod :)

[ibby]

Prescot E0 ;) 1.325 v Homie