GSKILL WONT BOOT 1t

[Mtemel]

why oh why cant i run 1T


my system..............
msi neo 2 plat bios 1.3
3200+ winni
raptor hd(on sata port 3)
gskill mem pc3200/pc4400 tccd (some pqi mem on way an now maybe order some vx ) as u can see im desperate :x

i have bios ver 1.3
i am using the onbaord sata 3 port on my mobo

ok so now the bios
htt x3
cpu 9 x
htt frequency 200
dram (ive tried all settings and timing but none will boot 1t) jus get blllleeeeeeeeppppp and have to clear cmos
DRAM settinga = max 200 (1:1) 2t @ 2.5,3,3,7 @ 2.85 vdimm

then i use CLOCKGEN to OC the clocks too...
9x 250 htt = 2250 cpu speed with mem @ 2t 1:1 250 fsb 2.5,3,3,7
2250 is wot i can get stable from cpu is this coz i cant seem to raise my cpu volts above 1.45?
no matter wot i put the cpu volts to in bios, wen i open CLOCKGEN its says max cpu volts 1.45
current cpu volts 1.45 even tho i ve put volts to 1.55 or higher in bios y is this?

i jus cannot boot up using 1t is there a setting i forgot??
i jus spent £180 on gskill memory coz i thought my old mem was the problem but i still cant boot up 1t even with no ocing it jus bleeps an i must clear cmos.

i know this is me doing something wrong coz i know this mem is tccd and should b ok 1t.
PLZ help me! what am i doing wrong ?

any help is much apprecaited

[The Virus]

why oh why cant i run 1T


my system..............
msi neo 2 plat bios 1.3
3200+ winni
raptor hd(on sata port 3)
gskill mem pc3200/pc4400 tccd (some pqi mem on way an now maybe order some vx ) as u can see im desperate :x

i have bios ver 1.3
i am using the onbaord sata 3 port on my mobo

ok so now the bios
htt x3
cpu 9 x
htt frequency 200
dram (ive tried all settings and timing but none will boot 1t) jus get blllleeeeeeeeppppp and have to clear cmos
DRAM settinga = max 200 (1:1) 2t @ 2.5,3,3,7 @ 2.85 vdimm

then i use CLOCKGEN to OC the clocks too...
9x 250 htt = 2250 cpu speed with mem @ 2t 1:1 250 fsb 2.5,3,3,7
2250 is wot i can get stable from cpu is this coz i cant seem to raise my cpu volts above 1.45?
no matter wot i put the cpu volts to in bios, wen i open CLOCKGEN its says max cpu volts 1.45
current cpu volts 1.45 even tho i ve put volts to 1.55 or higher in bios y is this?

i jus cannot boot up using 1t is there a setting i forgot??
i jus spent £180 on gskill memory coz i thought my old mem was the problem but i still cant boot up 1t even with no ocing it jus bleeps an i must clear cmos.

i know this is me doing something wrong coz i know this mem is tccd and should b ok 1t.
PLZ help me! what am i doing wrong ?

any help is much apprecaited

Is your AGP set to 67mhz?

[Mtemel]

yes agp is @ 67 mhz

[The Virus]

yes agp is @ 67 mhz

Use coreCenter or CPU Z to check your vcore.

Try 6x275htt 1:1. If it doesn't boot then you've got a serious system problem.

[Mtemel]

vcore shows 1.45 volts as i said this is the maximum i can run.
If i change vcore in bios clockgen still shows 1.45 (cpu-z also) no matter wot i change the vcore to.
wot could possible be stoping me booting 1T??

[$0m#0n#]

Try another bios, if it not works try the memory in another system, if it works rma the mobo.

[[ r2 ]]

Try bios 1.41/1.51 beta as its mainly optimized for TCCD chips.
if that doesnt work its time to rma your board. I had a problem with a Neo2 that it didnt boot at all with any bios version appart from using dimm 3 :confused:

Now i got new Neo2 S/NK0410xxxxx chip - 0440A2 Taiwan, been great so far.

Edit:
Are you using dimms 1&2/3&4 to run dual channel?

[Mtemel]

i am using the green dimms on my mobo, 1 & 2 i think, the manual said use green dimms

[[ r2 ]]

i am using the green dimms on my mobo, 1 & 2 i think, the manual said use green dimms

Ahh i think thats where the problem is, basically you are running single channel as the green dimms are 1 and 3.

So make sure you have the modules in dimm 1 (green) and dimm 2 (purple), the manual is wrong, MSI has rectified this on their website. Dimm 1 is the closest to the CPU.

[Mtemel]

man thx alot R2,
i ll try this wen i get home really apprecaite the advise dude!
again thx!

[[ r2 ]]

man thx alot R2,
i ll try this wen i get home really apprecaite the advise dude!
again thx!
Not problems at all champ, glad i could help

[texuspete00]

Anyone know if these are spec'd for 1T? Excaliber has them for sale but they aren't the egg about returns from what I hear. I am looking at these sticks but will not accept 2T. For that I'd stick with my BH5.

[[ r2 ]]

Anyone know if these are spec'd for 1T? Excaliber has them for sale but they aren't the egg about returns from what I hear. I am looking at these sticks but will not accept 2T. For that I'd stick with my BH5.

What ones?

[texuspete00]

The top of the line GSKILL. The 275 (2.5-3-3-7) - 2 * 512 kit. Don't remember excaliber mentioning command rate.

[[ r2 ]]

Top of the line GSKILL. The 275 (2.5-3-3-7) 2 * 512 kit.

1T, best thing is to ask Onepagebook, but im pretty certain.

[texuspete00]

Thanks. I know about mr. onepage. He'll probably see this. If not I'll PM.

It would just be easier for me to re-sell a cpu that wasnt up to snuff than sticks that can't do 1T. I always explain my luck with whatever I get rid of.

[Mtemel]

guys im home now and running 275 fsb 1t with 2.5,3,3,7

R2 was right (thx dude really apprecaited) it was coz my mem was in dimm 1&3 like the manual says to do, i changed to 1&2 now and all is cool

:D
Aain thx r2 <3

[[ r2 ]]

guys im home now and running 275 fsb 1t with 2.5,3,3,7

R2 was right (thx dude really apprecaited) it was coz my mem was in dimm 1&3 like the manual says to do, i changed to 1&2 now and all is cool

:D
Aain thx r2 <3

Very nice results, i wish i can get some here in Aus.

texuspete2k2 there you go running at 1T :D

[Pimp!]

good stuff :)

[Wavey]

Wheres the cheapest place to buy this Gskill??

Anyone a link :D