Post your Pics of Ram Cooling

[ArcticOC]

[QUOTE=ArcticOC]Still enhancing my cooler.. Also solved the problem with high temps on the powercuircut for the memory (4V jumper). The copper heatbridge take care of that PS! More to come :)

Very cool design !! :toast:

You own a machine shop ? CNC ? :D

Thanx!

Nope, i made the hole thing using:
- circlesaw (for cutting metal pipes/profiles)
- table drill
- flexi cutter

Mostly normal tool`s found in a standard garage

Don`t have a CNC bench :(

[ArcticOC]

ArticOC your rig is awesome!!! You easily have the highest clocked passive A64 right? Definitely make a thread in the SilentPCReview pic gallery (hell, go ahead and submit a worklog/article), I'm sure a ton of people would love your mods.

Thanx!

I`m already registrated on SPCR.. But I don`t like that forum :stick:
The posting rules there is too damn strict and some of the moderators is so damn picky. I havent fealt welcome there since the first day I posted on that forum. And the quality level of the users there is not so high, no spectacular mods, I`m easely beating the top clocks there with my system :fact:

If I post a worklog I rather do it here :toast:

My main forum is in Norway (forum.hardware.no) and all my DFI mods is in this tread: http://forum.hardware.no/index.php?showtopic=378691&st=2257

[nn_step]

I just added after market ram sinks and let my 7700 blow on them...

[LikwidKool]

Nothing you already haven't seen. Still though this 92mm fan keeps the whole area nice and cool. Even when running 3.5vddr the pcm chip is kept under control. A thermal probe attached to the heatsink right next to the ram slots without the fan registers 80+°c and with the fan it's in the 40's. Show's what some active cooling can do.

[vapb400]

Thanx!

I`m already registrated on SPCR.. But I don`t like that forum :stick:
The posting rules there is too damn strict and some of the moderators is so damn picky. I havent fealt welcome there since the first day I posted on that forum. And the quality level of the users there is not so high, no spectacular mods, I`m easely beating the top clocks there with my system :fact:

If I post a worklog I rather do it here :toast:

My main forum is in Norway (forum.hardware.no) and all my DFI mods is in this tread: http://forum.hardware.no/index.php?showtopic=378691&st=2257
I know exactly what you mean actually :slapass:

[masterofpuppets]

Just ghetto fitted a small deskfan to the side of my case to cool that toasty BH-5! :D

http://www.m0px.net/A100/IMG_0101.JPG

[Westley]

gsan, is that custom made or did you purchase it?
that is a forumer in m'sia do...
he is great in those kind of job...

[gsan]

http://img392.imageshack.us/img392/7412/pict02834wa.th.jpg (http://img392.imageshack.us/my.php?image=pict02834wa.jpg)

[5-Clicks]

http://img356.imageshack.us/img356/4752/img18736it.th.jpg (http://img356.imageshack.us/my.php?image=img18736it.jpg)

[dymONE]

http://dym.haluze.com/Images/Ramfreezer/Ramfreezer3.jpg
http://dym.haluze.com/Images/Ramfreezer/Ramfreezer4.jpg

[S!1v3rB@cK_Dk]

dymONE that is one hell of a crazy ram cooler! :o What are the temps of the ram now? And did u gain any oc by using this bucka!?

[Deus Falsus]

I just attached 2 A64 stock fans to the top of the Big Typhoon. Ghetto but effective...

http://i14.photobucket.com/albums/a345/deus_falsus/CIMG0415.jpg

[vapb400]

dymone is that a slot a cooler from micro center? I almost bought one that looked exactly like that after seeing yours, but decided I'd verify.


*edit*this one:
http://microcenter.com/single_product_results.phtml?product_id=0148853

[dymONE]

dymone is that a slot a cooler from micro center? I almost bought one that looked exactly like that after seeing yours, but decided I'd verify.


*edit*this one:
http://microcenter.com/single_product_results.phtml?product_id=0148853


No .. that is a heatsink from P2

[davidw8818]

have 2 120mn fan blowing on it, sry for the bad quality pics, its taken by a webcam wat do u expect eh?

[fallguy]

http://home.comcast.net/~denverspictures/7800GTX/Ramcooling1.jpg

http://home.comcast.net/~denverspictures/7800GTX/Ramcooling2.jpg

[El Snorro]

No .. that is a heatsink from P2

Did you gain any mhz with this type of ram cooling ??

[OV3RCLOCK3R]

http://img358.imageshack.us/img358/1008/dscf22903kl.jpg

[n0sTRa]

http://users.skynet.be/nostra/ram_cooling_at_A7NX_X.jpg

[rick_fx]

My ram cooling is pretty simple: 2x 80mm fans do the job :)

[general1]

Just finnised my ramcoolingmod =) What do you guys think?! (havent tryed them out yet)
http://files.upl.silentwhisper.net/upload0/PA180074.JPG
http://files.upl.silentwhisper.net/upload0/PA180078.JPG
My case is under construction =P a bit messy...

[OV3RCLOCK3R]

Just finnised my ramcoolingmod =) What do you guys think?! (havent tryed them out yet)
http://files.upl.silentwhisper.net/upload0/PA180074.JPG
http://files.upl.silentwhisper.net/upload0/PA180078.JPG
My case is under construction =P a bit messy...

First of all, Welcome to the forums :welcome:

That mod is really nice. How did you make the stand? :)

[general1]

Thanks OV3RCLOCK3R :D
This is what i used: http://files.upl.silentwhisper.net/upload2/PA190072.JPG
And how it hangs on the board:
The frame is slightly smaller than the ramslots, so it snapps on... on the ram "snappers" hehe. Bulletproof solution :)

[diamonddog]

Here is mine:

http://people.freenet.de/benches/ramwak/7.JPG

http://people.freenet.de/benches/ramwak/8.JPG

http://people.freenet.de/benches/ramwak/4.JPG

http://people.freenet.de/benches/ramwak/5.JPG

http://people.freenet.de/benches/ramwak/6.JPG

[ZMarre]

Very nice crafmanship, although it seems that not all the chips make proper contact?

Did you gain any more MHz on your ram after this mod?

[diamonddog]

The one pic was one of the first tries. Now all the chips have full contact. I won 11mhz extra. From 260 2-2-5 to 271 2-2-2-0 stable. The water have about 15 degrees. In winter time when it will be very cold outside about -20°C I will try give the bh5 -30°C. The water is phase change cooled to 15°C. Lower I have to insulate and insulating for rams is not so easy. So when it is outside cold I don't have to insulate. I hope for 280mhz :D 32M Super Pi.
Here you can see some benches:
link 1 (http://people.freenet.de/benches/sandra2.jpg)
link 2 (http://people.freenet.de/benches/ram271.jpg)

[GUFY]

http://slike.slo-tech.com/15428.jpg

http://slike.slo-tech.com/15429.jpg

[jamaika]

http://img440.imageshack.us/my.php?image=imagen0022sv.jpg

http://img364.imageshack.us/my.php?image=250323mu.jpg

2x512mb Geil Ultra-X Utt/Bh-5 :)

Preview Oc :cool:

[flick]

Fortunately, I have a mach II gt block and a MSI Neo2 Platinum that works perfect for sitting two 80MM fans on top of the block and allowing the power cords on the right to hold the fans in place.

[Bladesinger7x]

2x512MB TwinMos CH-5 with heatsinks
http://www.shrani.si/pics/kif_0672136217_resized.jpg

2x 80x80x15mm Zalman OP-1 fans on the plexiglass bracket
http://www.shrani.si/pics/kif_0700136225_resized.jpg

Everything installed in the Chieftec Big Dragon case:
http://www.shrani.si/pics/kif_0706136221_resized.jpg

[5days]

Hey where can I get some of those heatsinks Bladesinger?

[Bladesinger7x]

I purchased them here in Slovenia. They cost ~2 $ per piece.
In Australia, I don't have a clue.

I think they are videocard memory coolers (2 pieces came in
the box) - similar heatsinks were found on the GF2 cards :D

[El Snorro]

What brand are those heatsinks?

And dit you gain any mhz with it?

[NickS]

My ghetto ram under a fan. 2x256MB Nanya PC2700 @ 145MHz (2.5-3-3-7-2T)

I should really tighten down those timings, lol.

Soon to have some Crucial Ballistix.

http://www.xtremesystems.org/forums/attachment.php?attachmentid=40041&stc=1

I was feeling really lazy so I just snapped the pic through my window. :slap:

[Bladesinger7x]

About the brand - No idea :confused: As far as I recall the box just states
ram cooler - no manufacturer. If I see it in the store I will check it for you
(probably Monday).

No, havent tested it yet. Naked they did about 244 Mhz on 3.1v +.03v option
on the DFI NF4 (bios reads ~3.19v). That was memtest #5 50 pasess - can't
do more than 3.1v with my current PSU (it's a 20-pin Chieftec 420W PSU :rolleyes: ). Santa's bringing a new one :D

But I intend to run a few test in the following days if there will be enough time.

[El Snorro]

About the brand - No idea :confused: As far as I recall the box just states
ram cooler - no manufacturer. If I see it in the store I will check it for you
(probably Monday).

No, havent tested it yet. Naked they did about 244 Mhz on 3.1v +.03v option
on the DFI NF4 (bios reads ~3.19v). That was memtest #5 50 pasess - can't
do more than 3.1v with my current PSU (it's a 20-pin Chieftec 420W PSU :rolleyes: ). Santa's bringing a new one :D

But I intend to run a few test in the following days if there will be enough time.

Thanks in advance dude!
Was looking for such a nice ramcooling on my 2x512mb mushkin bh-6 :banana:

[Bladesinger7x]

El Snorro, here you go. Picture quality sucks - it was taken by a
mobile phone :rolleyes:

http://www.shrani.si/pics/slika%2824144755.jpg

http://www.shrani.si/pics/slika%2825144756.jpg


Also direct link: http://www.spirecoolers.com/hdd.asp?ProdID=37


Yaaaay, it is snowing here :D :D :D

[Jaco]

http://users.telenet.be/taye/pics/H2O%20cooling.JPG

Don't mind the towwel at the bottom of the case. That's only temporary to avoid pump noise/vibration. I still have to find a permanant solution.

[Banzai]

http://www.xtremesystems.org/forums/attachment.php?attachmentid=40221&stc=1
http://www.xtremesystems.org/forums/attachment.php?attachmentid=40222&stc=1

Cools everything down nicely. ~30cm wide, ~1000cfm, 240vAC. Oh yeah baby.

Ryan

[El Snorro]

El Snorro, here you go. Picture quality sucks - it was taken by a
mobile phone :rolleyes:

http://www.shrani.si/pics/slika%2824144755.jpg

http://www.shrani.si/pics/slika%2825144756.jpg


Also direct link: http://www.spirecoolers.com/hdd.asp?ProdID=37


Yaaaay, it is snowing here :D :D :D

Ok thanks so they are Spire.
Can get to that product here in Holland I think!
Thanks!

[FrozenPC4Brain]

This is how I see RAM cooling.
Simple homemade blocks.

[Daytime Dreamer]

This is how I see RAM cooling.
Simple homemade blocks.


I'd like to see that installed and running!! :slobber:
Did you gain anything from watercooling them? :clap:

[IvanAndreevich]

FrozenPC4Brain
Nice idea. Looks simple too

[biohead]

http://www.xtremesystems.org/forums/attachment.php?attachmentid=40221&stc=1
http://www.xtremesystems.org/forums/attachment.php?attachmentid=40222&stc=1

Cools everything down nicely. ~30cm wide, ~1000cfm, 240vAC. Oh yeah baby.

Ryan

dude - how loud?? :stick: :toast:

[Supertim0r]

http://www.xtremesystems.org/forums/attachment.php?attachmentid=41676&d=113587278580mm panaflo l1a

[irev210]

I went with the koolance ram coolers

http://www.koolance.com/homeimage03.jpg

[Daytime Dreamer]

I went with the koolance ram coolers

http://www.koolance.com/homeimage03.jpg


Did you see any improvements over air cooling?

[Origin_Unknown]

The rubberband trick again. Brought down my idle temps quite a bit, from 33C to 28C.

http://img41.exs.cx/img41/5057/fanram2kh.jpg


im using that method with a 80mm coolermaster fan

[brwmogazos]

here it is...been using this conf for years now....
They aint running 100% cos that would have been overkill...lol

ramsinks used are aluminium and the fans (DELTA) are attached directly on the ram sticks with the mach 2 seal string...

Ram is OCZ 3700EB

http://briefcase.pathfinder.gr/download/267942

[Jochenp]

Sorry for bringin this old thread back up, but this is very interesting, and it would be pitty if we didn't continue it!

[FragTek]

http://www.fragtek.com/pix/expert_topview.jpg

http://www.fragtek.com/pix/expert_ram1.jpg

www.fragtek.com/products.html

:toast:

[AlterBridge86]

nice work Fragtek - i'm gonna pick one of them up from you soon!! :)

[FragTek]

Thanks Alter! I look forward to shipping out your bracket :)

[Jochenp]

I should have known you would be the first to post here :D
Nice work BTW! If I didn't live in Belgium with it's skyrocketing bordercosts, I would order some, and mod them for the Neo2 Plat

[NickS]

I can't believe this thread ever died! Time to revive!

Heres my G.Skill 2GBGA @ 500MHz, 4-4-4-8, 2.25v BIOS (P5B Deluxe WiFi/AP)


http://upload.nickfire.com//files/13/newwc101alili%20004_thumb.jpg
(http://upload.nickfire.com//files/13/newwc101alili%20004.jpg)

[wa77ss]

http://img243.imageshack.us/img243/461/img0779mediumkr7.jpg (http://imageshack.us)


- wa77ss

[Omastar]

wa77ss is going high-concept here.

[oohms]

Rubber bands ftw indeed :D

http://i30.photobucket.com/albums/c306/oohms/misc%20oc/ramcooling1.jpg

[-n7-]

High tech cooling right here guys :cool:

http://img518.imageshack.us/img518/3581/ttbtnoctuascasepictc3.jpg

[eBoy0]

http://i5.photobucket.com/albums/y176/eBoy0/P1010148.jpg
http://i5.photobucket.com/albums/y176/eBoy0/P1010149.jpg

[rvd]

http://img215.imageshack.us/img215/6342/pic0129bi1.jpg

[techguy2k5]

Anyone using the standard Corsair Dominator cooler or OCZ's equivalent? I'd like to pick up one or the other but would like to hear some feedback from some knowledgeable folks first, as opposed to a bunch of twits on Newegg.

[oohms]

Anyone using the standard Corsair Dominator cooler or OCZ's equivalent? I'd like to pick up one or the other but would like to hear some feedback from some knowledgeable folks first, as opposed to a bunch of twits on Newegg.

The dominator cooler pushes a bit of air, but the fans are a bit higher up than i like (because of the dominator heatspreaders)

I'd use it for 2 sticks of normal ram, but not for 4