PDA

View Full Version : 6800GT + 2 x Delta 120 possible?


Tek
12-03-2004, 05:40 PM
I have one of these:

http://www.gainward.com/html/product/vga/PCI-Express/6800GT/2400pcxtvdvi2GS.htm

I would like to some how change that aircooling to 2 x these, if possible. If one more can be added underneath, with good effect, that would be great too:

http://www.sidewindercomputers.com/delffb1212eh.html

If it is, what would be the best setup? The HS on the card should be good enough, would adding two of the Deltas make the difference I think it will, like very good air cooling with all at full speed? :D

eva2000
12-03-2004, 05:58 PM
zalman fan bracket and 190cfm delta on top of video card - i've tried the exact same fans and there is a difference of 4-9C load temps :)

Tek
12-03-2004, 06:21 PM
Sounds great, thanks :)

TEDY
12-04-2004, 12:50 AM
190cm delta where ? omg ..that's 70db :D

Tek
12-04-2004, 04:08 AM
Sound levels doesn't matter when you have a %100 running Vapo LS 1 meter away :D

Love my 5.1 headphones, or else would have gone nuts from the sound level as it is.

The 6800GT does 53C idle and 67C load, 37C ambient, but no more than 420/1100mhz. I can pass tests at 440mhz/1140, and I would like to see if the card can be stable up there.

TEDY - Eva2000 says 190cfm = 190 Cubic Feet / Minute ... not 190cm ... 190cm ... at 4000rpm would move what ... say at least 10000cfm? :D

Next week I should get the equipment and stuff to do this. However, Eva2000, if you have any creative/theoretical ideas to mount one or two more of them, please do tell.

The 6800GT is turned upside down, so it should be able to hold more weight on top of it(Lian Li V2100 cab). It is possible to place 120mm fans just about anywhere in this cab. Going to place one of these on the RAM, instead of my POS 1700rpm one, I currently have and one to cool mosfets, replacing the small P4C Intel cooler that is already there.

The 120 Deltas should be one of the best for aircooling, if you can ignore the sound levels, so I think I am going to get a few of these to toy with.

eva2000
12-04-2004, 04:15 AM
no creativity needed, just mount and blow :)

http://www.fileshosts.com/pentium4/D1/albatron/px865pe_pro2_ich5/hsf/ich5_hsf_04.JPG

Tek
12-04-2004, 04:20 AM
LMAO, you have shown the way prophet :bows:

=[PULSAR]=
12-04-2004, 08:17 PM
Eva can you position the 120mm directly over the dimms with that bracket?