16.8k with ti4200 -> 3DMark PcTuner Team

[Dirty_Punk]

nice score today

http://service.madonion.com/compare?2k1=5009871

but i'm limited by DDR, it can't go any mhz highter.... if i set it to 2.9v (not it's t 2.8) it goes worse :(

any advice for advance tweaking?

[Hognert]

Very nice score! :)
Crazy high core clock :D.

Expect some company up there any day now ;).. My peltier for the gfx is finally on its way (disappeared in the mail for over a week...)

[Dirty_Punk]

the problem is that w/o voltmod my ti4200 can do 360/660, with voltmod only 370/720 :rolleyes:

the memory can't go up to 3.7 without corrupting...
and the vcore set to 1.75 give me 370, to >1.8 give less....:rolleyes: :(

don't know why...

[Hognert]

My core did something like 310 with def voltage. And thats a maximum.. totaly stable id say about 305MHz :/. Not very good at all... :/ The 770+ memory helps the score up though ;). I use 1,9V to be able to bench at 333. Over that gives no higher clocks. Im hoping for 350 with water/pelt... I dont feel very sure it will make it tho.

[Dirty_Punk]

mine do 335/340 with stock cooling for gpu, 360 with peltier & 3° water that isn't so impressive... the voltmod give only 10 more mhz... bad.... probably gpu limit... i don't know why...

and the mem.. nothing over 3.65v.... macci is at 4v!!!!! :(

[Bravo]

The clock speed is impressive for a 4ns card, especially an Abit. As i said on OCAU, it would be really impressive if you got that kind of score on an Abit system ;)

[Dirty_Punk]

mmm... 355 with 1.8.. 380 with 2.2... now i must try :D ;)

[SKATAN]

Originally posted by Hognert
My core did something like 310 with def voltage. And thats a maximum.. totaly stable id say about 305MHz :/. Not very good at all... :/ The 770+ memory helps the score up though ;). I use 1,9V to be able to bench at 333. Over that gives no higher clocks. Im hoping for 350 with water/pelt... I dont feel very sure it will make it tho.

did you lapp the GPU ?

last night I removed the thermal compound and added a thin layer trying to get optimal contact with the heatsink , but the results were very poor , and when I removed the heatsink I saw I was only getting a 10~15% contact between gpu and heatsink :eek: , these things are too damn concave and lapping is imperative , but I havent done it yet

[Raptor]

do it, do it, do it... come on skatan! :)

[Dirty_Punk]

reached 375mhz with 1.92v :D

the problem is that swifty MCW40 doesn't have a good contact/pressure on the gpu... next week try to mod the "clip"

the problem is that the P4 2400B isn't mine, and i have returned it today... so probably i'd burned my old it7, and the new it7 max 2 v 2.0 i'd tryed isn't mine :D

so probably next weekend i have a only a burned mobo & a 1800 that can't do >3100 :(

so i'll stop to play with 3dmark, and try to build a phase changer system, but i'm a newbie in phase cooling systems, so i don't know if i can build a working system... :( :rolleyes:

PS: sorry for my bad english :D :p

[w1per]

Only 234p to macci's score :D

[Dirty_Punk]

Originally posted by Hognert
My core did something like 310 with def voltage. And thats a maximum.. totaly stable id say about 305MHz :/. Not very good at all... :/ The 770+ memory helps the score up though ;). I use 1,9V to be able to bench at 333. Over that gives no higher clocks. Im hoping for 350 with water/pelt... I dont feel very sure it will make it tho.

i see that with pelt you have reached 360mhz with gpu!!!! very good ti4200!!! normaly pov & albatron & ti4600 like ti4200 can't get so hight mhz for gpu..

strange that you haven't a 17k score with memory at ~800mhz!!! probably must tweak another bit, try to beat macci!!!!! ;)

have you lapped the gpu core??

[Hognert]

Originally posted by Dirty_Punk
i see that with pelt you have reached 360mhz with gpu!!!! very good ti4200!!! normaly pov & albatron & ti4600 like ti4200 can't get so hight mhz for gpu..

strange that you haven't a 17k score with memory at ~800mhz!!! probably must tweak another bit, try to beat macci!!!!! ;)

have you lapped the gpu core??

Yea Im pretty happy with the clocks :). The GPU is lapped, not completly flat but still good. I think I can reach 365 core with some proper cooling paste, way higher then I expected :). Some badass custom sinks for the memory gave me 20MHz just like that. The stock ones plain sucked. Also upped the Voltage on the Core to 2,05V and 3,14V on the memory. Higher Vcore gave me nothing. Higher Vmem gave me lots of more artifacts ;).

About the score, yea its to low, I know. Did a fresh install of WinXP and something just went wrong. Trying to figure out what. With my messy old install I got about 200-300 more points at the same clock. In theory this install should give me better scores but I guess thats life sometimes ;). If I cant get it running proper I'll just do a new install again and leave all the tweaks out.

edit: I see my lobby scores are the "lowest" ones. Yours and Maccis run in circles around mine ;).

[dcl]

far out. Very nice score. I can only just beat that with my radeeon 9700!

[Dirty_Punk]

Originally posted by Hognert
Yea Im pretty happy with the clocks :). The GPU is lapped, not completly flat but still good. I think I can reach 365 core with some proper cooling paste, way higher then I expected :). Some badass custom sinks for the memory gave me 20MHz just like that. The stock ones plain sucked. Also upped the Voltage on the Core to 2,05V and 3,14V on the memory. Higher Vcore gave me nothing. Higher Vmem gave me lots of more artifacts ;).

About the score, yea its to low, I know. Did a fresh install of WinXP and something just went wrong. Trying to figure out what. With my messy old install I got about 200-300 more points at the same clock. In theory this install should give me better scores but I guess thats life sometimes ;). If I cant get it running proper I'll just do a new install again and leave all the tweaks out.

edit: I see my lobby scores are the "lowest" ones. Yours and Maccis run in circles around mine ;).

i see your incredible 3dmark score with AMD!!!! impressive! ;)