3200+ winne @ 2900MHz..

[Razor_cut]

Yo.

Started tweaking this beauty yesterday, and after some clocking, chilled with -6C air, SLK948U + Delta80x80:

1M SuperPI:

http://upl.silentwhisper.net/uplfolders/upload8/2900MHz2.jpg (http://upl.silentwhisper.net/uplfolders/upload8/2900MHz.jpg)

8M SuperPI:
http://upl.silentwhisper.net/uplfolders/upload5/2850MHz2.jpg (http://upl.silentwhisper.net/uplfolders/upload5/2850MHz.jpg)

Somthing great about this Winchester is that it likes volts. I wonder how long it would go with 1,8V, it got 1,68-1,72V under these tests. Since theres an missed 1V when you use Winchester cpu:s, the only way to get 1,8-1,9V is by doing a vcore mod? Or is there a bios in the making?
Im runing the 1.35b at these tests.

[funkflix]

Great results m8! :)

What was the temp. of the A64 while this thests and the subzero-outdoor-temps?

[Razor_cut]

2.3-4,5C With LianLi T-3 tempmeter..

[funkflix]

Mhm, the temp. of the A64 i mean!? What does the Bios and the Tools says?

[Razor_cut]

The bios dosnt work beneth 14C, it simply crashes..
I didnt run any tools either..

[funkflix]

Ah, ok! :( Try to use the 1.41b Bios!

[sjmX`]

congrats mate!!!

[NiCKE^]

I want a XP-90 and a vantec tornado!! :D Then I will try to get your speeds :D

[FX Freak]

congrats :toast:

[Razor_cut]

Thanks a bundle! :thumbsup: 0433SPMW rocks more or less.

Now its the volt mod left to do..

[NiCKE^]

Yeah! :D Seems like three stores in Sweden got those.

[FX Freak]

next week, i´ll also bench with my 3500+:D
next week arrive my watercooling, and then i´ll bench with ice water:D

[sjmX`]

ice water????????????

[chinabox]

The bios dosnt work beneth 14C, it simply crashes..
I didnt run any tools either..

that part seems to be valid for me as well

CBID tells me cpu is running at 20cidle STOCK 1.4v
my temp prob at underside of waterhead stuck next to cpu tells me somewhere between 18-21c

whenever i get a temp below 14c my bios wont cooperate :stick:

im considering pumping more volts in it JUST to get it to stay above 14c on restarts lol

[Razor_cut]

that part seems to be valid for me as well

CBID tells me cpu is running at 20cidle STOCK 1.4v
my temp prob at underside of waterhead stuck next to cpu tells me somewhere between 18-21c

whenever i get a temp below 14c my bios wont cooperate :stick:

im considering pumping more volts in it JUST to get it to stay above 14c on restarts lol

Well it only crashes when I look at the temps inside the bios, not if I adjust the clocking or so..

[peter lu]

beauty today, and after some clocking, chilled with 26C air,Hyper + 8x8(3000).

oh.Taiwan very hot.

http://my.so-net.net.tw/xu1060/G103.JPG

[stelleg151]

Very nice guys, 29 and 30 second super pi with 200 dollar cpu is sweet.

[Unseen]

@razor msi mobo?

[esdee]

@razor msi mobo?

Since it crashes while looking the temps it's a good guess it the MSI :D