Intel 3.4 E Socket 478

[Webzta]

Does anyone have any experience with these under water..

I'd be looking to run it in an Epox 4pca3+ Rev 2.2 , OCZ Gold 4400 Ram
Cooled by tdx DD setup.


I currently have a p4 2.4c@3.6ghz

How far will the 3.4e go?

thanks in advance..

[uclajd]

I got one that hit about 3.8-3.9 with higher-than-stock vcore, which is no better than my 3.2E does, so I returned it. This was however a D0 stepping. The newer E0 steppings are supposed to be better, but that is anecdotal at this point, since nobody seems to have one.

Be sure to aim for the latest E0 stepping if you pull the trigger:

http://processorfinder.intel.com/scripts/details.asp?sSpec=SL7PP&ProcFam=483&PkgType=ALL&SysBusSpd=ALL&CorSpd=ALL

http://processorfinder.intel.com/scripts/details.asp?sSpec=SL7KD&ProcFam=483&PkgType=ALL&SysBusSpd=ALL&CorSpd=ALL



Does anyone have any experience with these under water..

I'd be looking to run it in an Epox 4pca3+ Rev 2.2 , OCZ Gold 4400 Ram
Cooled by tdx DD setup.


I currently have a p4 2.4c@3.6ghz

How far will the 3.4e go?

thanks in advance..

[jjcom]

yeah that thing could proby do about 4ghz....a better chance since you've got water. So It'd probly do 4ghz-4.1ghz is my guess. Should be a nice chip. If you can, wait until the new stepping starts showing up.

[cpulloverclock]

http://www.xtremesystems.org/forums/showthread.php?t=38755&highlight=3.4E

http://www.xtremesystems.org/forums/showthread.php?t=43245&highlight=3.4E

[tomslick]

Here is mine.

http://www.picgoo.com/members/pic.php?u=174Id8EB&i=1365

http://www.picgoo.com/members/pic.php?u=174Id8EB&i=3193

and this is my ozc pc4000 at 2.9v 1:1 timing at 560mhz

http://www.picgoo.com/members/pic.php?u=174Id8EB&i=3465

I have no complaints.

[dwwalker14335]

I have a 3.4E SL7E6 D0 that goes to 4.1 GHz (242 FSB) with 1.5875 V (according to Abit BIOS, so lower in reality) and I have made runs at 4.25 with 1.6125 V. I am using watercooling to keep temps under control. If you get it really cold, it could go much higher.

[ed.howell]

I have one and it is doing 4,164 with 1.475vcore. This is with the 17 multi though :( I have to do some mods to my board so I can hit this with the 14 multi. It's the one in my sig, on watercooling.