PDA

View Full Version : 3500+ Or FX-53 or Fx55 to reach the 3,0ghz



derprof
11-17-2004, 11:41 AM
Hi i want to buy me a ne system.

a sli system which one of those cpus. I want to clock the system @3,0-3,1 ghz under water(extrem) but my budget is not so great. The next question is about the ramm concerning which kind of firm and model of ram i should by.


1 or mybe 2 x Western Digital Raptor WD740GD 73.4GB
10000rpm, 8MB Cache, 4.5ms •
CPUs » AMD Athlon 64/64FX Sockel 939
+
1 x AMD Athlon 64 3500+ 0.09µ Sockel-939 boxed, 2.20GHz, 512kB Cache (ADA3500BIBOX)
"Winchester"-Kern •

2* 512 mb ramm

1 x Gainward PowerPack! Ultra/2400 Golden Sample, GeForce 6800 GT, 256MB GDDR3, DVI, TV-out, AGP (471846200-6039)
GeForce 6800 GT

mybe a second one 2 months later


1 x MSI K8N Neo4 Diamond-54G, nForce4 SLI (dual PC3200 DDR) (MS-7100-010)

nForce4 SLI • USB 2.0/dual Gb LAN/4x SATA2 RAID/7.1 Audio (Realtek ALC850)/Fire...
or the coming dfi???




or only the
1 x AMD Athlon 64 FX-55 Sockel-939 boxed, 2.60GHz, 1024kB Cache (ADAFX55ASBOX) 28 ab 772,71 17.11.2004 Norsk-IT
Speicher » DDR-SDRAM 184pin which a board an a 6600gt

please help me


thx

cetoole
11-17-2004, 11:53 AM
I would get the first option if this is for gaming, because the 6800gt will help more than the FX55, but don't expect a stable 3.0+ghz machine on water. It could happen, but no guatantees. For RAM, I would get 2x512 of something with TCCD chips, like OCZ PC3200 rev.2. It is too early to tell about the mobos, but I like the look of the new DFI, and they have some of the best boards lately.

derprof
11-17-2004, 12:04 PM
well but iám favourising the fx-5 cpu .

but i can wait upto january ,so the price limit is a little bit higher, an the price are lower hope, what do you think about it?
do you think a 3200+ oder 3800+ can reach the 3,0 ghz?
whats abut the fx-53 , maybe i can get it around 500€.
is it so impossible to reach the 3,0 ghz in a stabile mod ??


the ramms for example:
tccd (http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&category=21899&item=6721730858&rd=1&ssPageName=WDVW)

ocz (http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&category=21899&item=6721742340&rd=1&ssPageName=WDVW)

what is the best way for nen athlon 64?

cetoole
11-17-2004, 12:11 PM
The tccd is better than the eb, but if you can get some that is new, there was a recent minor die revision with tccd that allows it to run tigher timings at higher speeds. 3.0ghz is possible, just difficult with water.

derprof
11-17-2004, 12:18 PM
so this ramm is the right one.

well due to the fact that only the fx-55 is able to reach the 3,0ghz line under water , i´ll wait until it is around 500E, or mayber the 4000+ is much cheaper.
in your opinion is it better to buy nen 3500+ good rams and clock @ mayber 2,85-2,9 ghz and @ first one 6800 gt (256mb @ 430/1100) and after a time of saving money ,buying a second one, in oder to run in sli mod.

cetoole
11-17-2004, 01:48 PM
Yes, I would get the 3500 and 6800 instead of the FX-55 and 6600.

MightyOne
11-17-2004, 02:47 PM
You are aware of the fact that you can't run SLI the AGP-card you listed earlier, right? You'd have to sell that one and buy two PCIe cards later on ...

Right now, neither the PCIe graphics cards nor the mainboards are available, and especially nVidia's high-end PCIe graphics cards seem to remain in short (or rather no) supply. And about 3GHz on water: I highly doubt it. Maybe for screenshots or extremely short benches like SuperPi, but never for 24/7 usage.

Und versuch dein Deutsch und Englisch nicht ganz so schlimm zu mischen. ;)

blinky
11-17-2004, 04:20 PM
the board ur gettin msi k8n neo4 only supports PCIe so make sure u get a pcie 6800 and not a AGP one like u have listed

Vranichou
11-17-2004, 10:44 PM
You're budget must be a little better than not so great if you're even considering a system like that....

-=Vran=-