Any things to say about the OCZ EL PC4400 Gold?

[freshp]

First, hi @ all

I have a DFI UT NF3 250GB and a 3000+ with CG-Stepping (AX) @ home.
Next step for me is to buy some fine oc-memory.
I take my eyes on the OCZ EL PC4400 Gold. Is this mem good for oc?
Want to have a high fsb with cl 2,5. Or are there any other mems that runs well and are recommandable? Fsb 270 with cl 2,5 ist a must have for me.....
Allthought i want 2x512MB sticks :D
The sys should be able to run 24/7 with these settings, not just for a great score :cool:

Thanx for any comments and sorry for my english :(

[Gogeta]

I use OCZ PC4400 EL Gold in an Intel rig, and it does 275MHz at 2.5-4-4-7 no problem. However, there is better RAM available for overclocking on the NF3...particularly anything with TCCD chips.

Check this thread: http://www.xtremesystems.org/forums/showthread.php?t=43659

[freshp]

Im not "sick enough" for put 3,4V in my Rams 24/7. I want give them max. 3.0-3.1V......

[winston]

Been there and tryed it

ANd don't bother

I reached 265 FSB due to the memory controller

Get the OCZ EL DDR PC-3200 Platinum Revision 2 or the OCZ EL DDR PC-3700 Platinum

Using Samsung TCCD chips and is the best atm for A64

[Ubermann]

Take any TCCD ram and only use one stick.
Should hit 300FSB with 2.5cas then.

But you want 2 sticks so it should hit 270 at least.

[Gogeta]

The OCZ PC4400 seem to be optimised for 875/865 chipsets, as I haven't seen any good results on AMD platforms. TCCD is pretty much unparalleled on the NF3. And don't worry, you wont need more than 2.8-3.0v to reach very high speeds. You should really look at the thread I linked if you haven't done so already.