otal newbie... DYI Phase change need help?

[tictac]

Is this setup ok for my 1st phase change project?

http://69.93.183.37/802/26/upload/p668348.gif

if the pic didnt show up click here

http://69.93.183.37/802/26/upload/p668348.gif

I'm total newbie in this area.... sorry :(

Maybe i'm missing some part on that drawing... please correct me :toast:

[Zejtan]

the layout seems to be correct.
But, place the schrader valves closer to the compressor in the rig when you build it.
"Happy building" to you,

[tictac]

do you mean the low side valve.. make it closer to compresor?

Thanks ;)

[Zejtan]

doesnt make any diffrence anyway, but it makes the setup look "nice" when it is build acording to me. You will probably have a inlet on your compressor that are meant for service valve, but if i where you, i would place the high side valve closer to the compressor pointing up if possible.

[tictac]

Ok thanks.... ;)
Will do that

[tictac]

Is this setup ok for my evaporator Block?

http://69.93.183.37/802/26/upload/p669585.gif

if the pic didnt show up click here
http://69.93.183.37/802/26/upload/p669585.gif

Is it to tall or to small ? hehehe :D

i'm planning to use it on my CPU ABIT Nf7S socket A...

i dont think it will fit if i use 5cm x 5cm block :(

[kayl]

i make mine with 15mm base with a 5mm lid, lid can be even thinner 3mm if ya like.
do you know how heay copper is.
a 50mm x 50mm x25mm weights 500g (raw material before machining)
you will definetly wont be able to mount that in a tower case.
like the channel design though



ps socket A for AMD a 50mm x 50mm block covers cpu exact. :toast:
thats what i use

[tictac]

Ok thanks Kayl...

I'm planning to use R22 Gas....

1/4HP R12 Compressor... is it ok?

And 2 Cap Tube per Evaporator block.... :)