View Full Version : MSI K8N NEO2 dual channel benchmarks really low.
DazzXP
10-03-2004, 01:27 PM
Just installed this board yesterday but my memory benchmarks are really really low.
On my A64 3500+
2.4GHz (219MHz x11) ASUS A8V, 6200MB (thr 7000MB/sec)
2.62GHz (250MHz x 10.5) MSI K8N NEO2 5900MB/sec (thr 8000MB/sec)
2.53GHz (266MHz x 9.5) MSI K8N NEO2 6900MB/sec (thr 8600MB/sec)
Why are memory memory benchmarks so low?
ASUS A8V T2 2.5/4/4/7 with Geil PC4000 @ 2.8v
MSI K8N NEO2 T1 and T2 2.5/4/4/7 with Geil PC4000 @ 2.85v
This was also with a clean format.
saaya
10-03-2004, 01:35 PM
are you sure its with command rate 1?
DazzXP
10-03-2004, 01:52 PM
Yeap tried 1T, 2T and auto there seems to be no diffrence in them. The ASUS A8V ran at 2T.
saaya
10-03-2004, 02:10 PM
there is no difference between 2t and 1t in sandra? then theres something wrong...
DazzXP
10-03-2004, 02:53 PM
Found a optimised setting in the BIOS which greatly increased my bandwith :) 7100MB/sec @ 250Mhz FSB which is slightly higher then what i was getting at 266Mhz :eek:
Drisler
10-03-2004, 03:06 PM
What was the name of this setting exactly?
DazzXP
10-03-2004, 03:14 PM
BIOS / Cell menu / High Peformance mode enabled and then enable agressive timings, but turn off Dynamic Overclocking to manual. My computer will no longer run at 266Mhz any more so i guess i will need that OCz volatge DIMM to give me more then 2.85v :)
BTW, don't use .5 half multiplier unless you're prepared for a drop in bandwidth.
Onepagebook
10-03-2004, 10:55 PM
BTW, don't use .5 half multiplier unless you're prepared for a drop in bandwidth.
dude, you learned! :toast:
DazzXP
10-04-2004, 11:47 AM
really i will have to try that.
I just tried it and didn't do anything to my bandwith.
vBulletin® v3.7.6, Copyright ©2000-2010, Jelsoft Enterprises Ltd.