PDA

View Full Version : Kingston bh5

georgesod
10-01-2004, 03:32 PM
Hi i am about to recieve 2x512 Kingston HyperX KHX3200K2/1G. My intension is 251+. What can i expect of them?(with Max3 3.2c)
saaya
10-01-2004, 04:08 PM
rather unlikely... depends on how much vdimm youve got to play with... really depends, there are good and bad bh5 sticks, theres a wide spectrum...

good luck!
thephenom
10-01-2004, 04:24 PM
Kingston....hardly see any of them reach 250+ w/ ~3.2v....i guess if you shove 3.5v in them, they might.
saaya
10-01-2004, 04:35 PM
at least 3.5v
sparkie34
10-01-2004, 05:49 PM
Chances are good you'll see around 230mz.
quick
10-01-2004, 05:51 PM
i think he was saying he has a max3 with a p4 3.2c. If you havn't done the mod to the board don't expect to much becuase you can't even use voltages 2.9-3.2.
bh2k
10-01-2004, 06:13 PM
mine did 250 with 3.3...

but mine were 256 KHX3200
LikwidKool
10-01-2004, 08:07 PM
mine were also 256 and did 250 at 3.2v
Gk22CoE
10-01-2004, 08:17 PM
might be able to get 250 at 3.2v in single channel but duel channel is pretty hard on the ram and 256 sticks usually do better then 512's
saaya
10-02-2004, 01:01 AM
you will def want to talk to kris about this, he managed to get 4 512mb sticks to almost 250mhz 2-2-2 on an 875 board ;)

he will tell you that its all about vtt :D
georgesod
10-02-2004, 02:56 AM
Hey i'm getting also Hipro's maximizer which tracks the vtt, so it won't be an issue
X-GeN
10-02-2004, 07:12 AM
http://server5.uploadit.org/files/brandybuck-bh5.JPG

These are Hyperx KHX3500 BH-5. This is what they can do with 3.7v :banana4: :D
enzoR
10-02-2004, 07:18 AM
http://server5.uploadit.org/files/brandybuck-bh5.JPG

These are Hyperx KHX3500 BH-5. This is what they can do with 3.7v :banana4: :D


thats incredible! what motherboard is that on and can u give us some more voltages? (vagp, vnothy ?)
X-GeN
10-02-2004, 07:23 AM
It's my friend's rig.

ASUS P4C800 Deluxe
Vagp 1.8v
Board has vdimm, drop mode. It doesn't have agp mode.
Lithan
10-02-2004, 09:07 AM
Ummm. People saying kingstons don't clock well. My first stick of khx3000 was memtest STABLE at 245mhz 2-2-2 on a STOCK nf7-s 2.0. That was ~2.94vdimm. And it was a 512meg stick. Shame the board wasn't windows stable above 230.

I've got two sticks of that khx3200 too. Did you get yours from compuvest? Did either stick look like someone had removed the heatspreaders? Mine had some scratches right where you'd expect from spreader removal on one of the supposedly "New" sticks.

Hopefully a bios flash will get my p4p doing 2-2-2 just fine and I can test the sticks a little.