Performance Problems with DFI 250GB

[Mrki]

Hi,

I have posted in the DFI Thread but nobody can help me.

The Problem is that my 3400+ NC runs with my OCZ 3500EB 2x256 on 10x260 with 2.5-2-2-6 Timings. Sure CPC on.

But i have only 35Sek. in SuperPI :(
A few other people in german Boards have the same Problem.

Is this that because is an NC and not an CH. CH runs more better with the DFI when you looks at performance ...

Can anybody help me?

Here a Screen of my SuperPI

Greetz Mrki

P.S: Sorry for my bad English, hope you can get the meaning of what I wrote ;)

http://mitglied.lycos.de/siedl/10x260.jpg

[Ubermann]

You disabled thermal trottling ?

[Mrki]

Jep ...

[blinky]

use the A64Tweaker by codered, ull get another second off ;)

[Samael]

Are you 100% stable at 2.5 with 1.55v??
If not maybe this is the answear.I noticed that when my 3400+ or my RAM are beyond their limits by just a few Mhz the Pi ends the calculation but it delays....

[eva2000]

you're running AUTO for

Trc
Trfc
Twr
Twrt
Trtw

hence poor performance

you need to tweak them http://i4memory.com/showthread.php?p=974#post974 :)

[Snowman89]

you're running AUTO for

Trc
Trfc
Twr
Twrt
Trtw

hence poor performance

you need to tweak them http://i4memory.com/showthread.php?p=974#post974 :)
what should you drive on them?

[Mrki]

this here ?!?!?

http://www.fileshosts.com/AMD/DFI/6002_650/3400_2/Kingston/KHX3200K2/2x256/10_11/LDT_AUTO/10x/260-260-2226-1T-8-12-2-2-2-2-7x-16x-1.66-3.3-1.5-1.6/a64tweaker_original.jpg

[Tedinde]

Listed to Eva2000, that's the first place i went when i fired up my DFI, man there's a lot of mem settings on this board!!!

[Dissolved]

35seconds isn't to bad, thats about the normal ive seen on basic oc'd mobos..

if your lucky you can get half a second less, Maybe dropping it to 34.. but i would try to get that cpu a lil higher if you can.


EDIT: eva2000 THANKS For that Thread Link!

[Mrki]

I put in my Corsair 3500 BH-5 with 3.15VDimm (Board cant take more :( ) and it rulls not bad!
An 3400+ CH 1MB is only 1Sek. faster than mine.

i take a64 tweaker and eva's timings ;) .. only little bit faster but not much ..

:toast:

http://mitglied.lycos.de/siedl/10x250.jpg

[Zeus]

I beg to differ.

[Mrki]

I beg to differ.


take a64 tweaker? timings? :)

[eva2000]

I beg to differ.
about right your clawhammer should be 1s faster than my newcastle at same speeds

http://www.fileshosts.com/AMD/DFI/6002_650/3400_2/Kingston/KHX3200K2/2x256/10_11/LDT_AUTO/10x/255-255-2226-1T-10-12-1.66-3.2-1.5-1.6/superpi-1m_tweaked.jpg

http://www.fileshosts.com/AMD/DFI/6002_650/3400_2/Kingston/KHX3200K2/2x256/10_11/LDT_AUTO/10x/260-260-2226-1T-8-12-2-2-2-2-7x-16x-1.66-3.3-1.5-1.6/superpi-1m.jpg

this here ?!?!?
Mrki, it depends on the ram brand/speed, set mhz speed, timings as to what you should set it.. as i said go to http://i4memory.com/showthread.php?p=974#post974 it has step by step guide as to how to fine the optimal settings for each specific brand of ram and settings

[Mrki]

update :banana:

http://mitglied.lycos.de/siedl/10x250_35sek.jpg

Somone with 34sek?