PDA

View Full Version : is there a ground point on the 6800ultra??

shigs
09-20-2004, 04:31 AM
right ive volt modded my 6800ultra to 1.67vgpu and i currently ave my ground point connected to my case, which is pretty annoyin as im always swappin the card in and out my system with my x800pro, so i would like to kno if there is a ground point on the card which i can solder to??
Denniscooldelux
09-20-2004, 05:25 AM
yes the card have ground points to.
the simple way is: solder a wire to the solt blend of the card
shigs
09-20-2004, 06:12 AM
yes the card have ground points to.
the simple way is: solder a wire to the solt blend of the card


if i kno wat u mean? ive tried that mate, the card slot plate does not act as a ground point :confused: if u ave a pic of wat u actually mean?
Denniscooldelux
09-20-2004, 06:26 AM
the green thats ground points on a gf2 gts and on the vga conector the same on a gf fx5200
and a tnt2
the dvi conector has ground points to.
i ever use the bigger points from the vga conector.
http://people.freenet.de/denniscooldelux/ground1.jpg
http://people.freenet.de/denniscooldelux/ground2.jpg

sorry for my bad english
shigs
09-20-2004, 07:15 AM
the green thats ground points on a gf2 gts and on the vga conector the same on a gf fx5200
and a tnt2
the dvi conector has ground points to.
i ever use the bigger points from the vga conector.


sorry for my bad english

oh ok mate n1, ty ;)
HaLDoL
09-22-2004, 03:15 PM
just solder it at the back of the molex where the 2 black wires are.