Where art thou Prescott?

[vapourit]

sold the 2.8E to a friend to run at a much more respectable 3.2 Ghz @ stock voltage.


3.7 GHz @ 1.5v was too damn hot. I bought a 3.0C and I am loving it so far.

250fsb, 3.75 GHz, 1.575v, 54.5c under load.

Priming as we speak...

I got an OCZ powerstream 470w and a 120mm fan to blow over the RAM while I was out today. It's all installed and ready to rock and roll.

[EnJoY]

Looks sexy, however I've seen 3.9GHz with SP94's and Tornado's on a 3.0C. Maybe put in more volts? Nice setup though, that PSU is especially sweet/

[saaya]

stable? nice!

you should hit 4ghz+ w/o any problems on water :)

[pik-ard v1.1]

christ! barly above stock voltage, and already 760mhz up... thats nice...

put 1.7v thrugh that, see if ya cant do 3.9-3.95ghz ;)

[feesh]

Very nice. I haven't had such good luck with the 3.0c's. The last 3 I had wouldn't do above 3300 at stock voltage :mad: Congrats on a good looking chip.

[althes]

try for 4ghz

[vapourit]

I often laughed when people talked about getting a better power supply and that it made a big difference. But my RAM, which I couldn't get to run stable at anything but the slowest timings, is looking a little bit better. This RAM was cheap as sin about a year ago and it looks to have new life....

Voltages and rock solid, VTT still sucks... but that is another issue. Going to try for more after I make sure this is stable. Priming for 2 hours now.

[vapourit]

RAM: 2.9v

[Hilppa]

I'm loving it :D

http://www.silentworks.net/sekalaiset/memmax.jpg

[bias_hjorth]

dont wanna thread hoggin but I installed a shuttle sb62 with a 3.0 prescott yesterday. Did 4.125ghz with 1.55vcore in a somewhat crappy posedion cooling.. these new batches clock rather well :)

[chikitano]

Hello:

That CPU raises like my...I with the dissipator original of intel and obtained this (http://tinypic.com/de9c) I believe that your can to raise it also (with something but of voltage, because my arrived at 250fsb with 1.536v)

Pd: that step is?

Salu2.