View Full Version : some more barebone power :-)
Stinger
08-11-2004, 02:27 PM
I wish I had some better cooling but this isnt so bad on air with my 3700+ in a barebone at 277mhz 1:1 2-5-2-2 http://service.futuremark.com/compare?2k1=8038492
bias_hjorth
08-11-2004, 03:00 PM
impressive!.. on stock PSU?
LilGator
08-11-2004, 05:59 PM
looks like a nice little setup, how well does that board work ? 250gb I see :) FSB up to 250MHz, Multiplier adjust, vcore up to 1.55v, vdimm up to 2.8v, memory timings...
Mobile support ?
r3b0rN
08-11-2004, 10:12 PM
isnt his fsb at 277?
thats an awesome barebones.
Stinger
08-11-2004, 10:26 PM
Bias_hjorth--> The org psu isnt that good so right know I'm using an fortron 400w atx but I'v ordered a Enermax 270w matx that will do the work.
LilGator--> I'm very pleased with this board in the barebone Fsb up to 250mhz in bios but there are a couple of bioses that goes up to 300mhz, vcore modded and ddr booster couldent be better. I had my AN50R up to 280mhz 1:1 2-2-5-2 earlier and got 30k with 9800xt at 634/472 but that was a struggle, this is easy and the board just asks for more. :-) right now 277mhz 1:1 but thats not the end I think it has more to give. Did 300+++ at 5:4
Why did I sell my 2 modded prommy? Damn, I want them back so I can get in to top 5 on the orb with this little thing.
bias_hjorth
08-12-2004, 01:25 AM
haha a barebone Ã:banana:n top 5 would be nice.. Funny you didnt think much of the original PSU.. Cause when I did some clocking with the Shuttle sb62 I´d use the original PSU which did a pretty fine joob if you ask me :D
Well I guess that the difference between shuttle and soltek...
But nicely done :)
LilGator
08-12-2004, 06:30 AM
Would a SLK-948u fit in that little thing ?
Stinger
08-12-2004, 06:32 AM
if it is smaller than Zalman 7000A yes :-)
Crankster
08-12-2004, 09:09 AM
Bra jobbat, har inte marquzz eller gabbax något de kan låna ut för sverigen skull?
Thats a might great achievement on a barebone and on any board at that :toast:
StormPC
08-12-2004, 03:26 PM
Originally posted by Stinger
I wish I had some better cooling but this isnt so bad on air with my 3700+ in a barebone at 277mhz 1:1 2-5-2-2 http://service.futuremark.com/compare?2k1=8038492
Great job Stinger!:up:
Damn, you nearly beat misteroadster's phase-changed S939 rig with waterchilled X800 XT PE (just 41 points lower)!!! And with a single channel S754 ClawHammer on air! Exellent!;)
http://service.futuremark.com/compare?2k1=8018179
Stinger
08-12-2004, 10:23 PM
Thanks guys,
StormPC--> I guess I have something to do in the weekend ;-).
My new 2x512mb 3700EB just arrived and they can do 275mhz 1:1 and have almost the same bandwith when I tested them at 250mhz (std spd) as my hyperx khx3200 bh-5. The Ocz even capable of running 3-2-2-2 at 250mhz. Cas 2.5 up to 255mhz but they hate Cas2.
Frank E. BoNeS
08-13-2004, 01:13 PM
Very impressive for that setup Stinger. Nice job man :toast:
Stinger
08-13-2004, 06:14 PM
been busy tonight :-) tried both my memory and 3700EB is very nice topped out at 285mhz 1:1 std spd but my hyperX bh-5 are even nicer 283mhz 1:1 2-5-2-2 managed to raise a little :-) 32611 3dmark but the damn orb is down as usual so I cant post it right now. Can somebody send me a cascad please?
Update: At last the orb would let me in http://service.futuremark.com/compare?2k1=8043898
r3b0rN
08-13-2004, 07:24 PM
285 1:1 ... amazing.
macci
08-13-2004, 09:52 PM
Excellent barebone-benching :D thats just mad score. is the weather getting a bit colder in sweden too? ;)
its only +10c here rite now and it seems that the benching season is getting closer again :D
nearly 2.7g on air. hmm those 3700s seem to be very nice clockers!
Stinger
08-14-2004, 12:47 AM
macci--> Thanks Yes the wheather is much better for aircooling now there has been around 30 deg earlier but yesterday it dropped to 18-19 deg I had a much better run than 32611 but nature took care of that in the end. :-( I'm very happy with the 3700+ I'v got a good one I think I wonder what it could do with your cooling? :-) a first place maby? ;-)
If only coolaler could delete some of his results I would be on the second page. :-(
gabbax
08-14-2004, 08:51 AM
What ya think guys, should i let the most bencheble guy in Sweden all times(3DMark), use my(hes old) r404 machI unit?:D..Stinger, get your ** in to the car and get over here, fore som serious action:)
Grats m8, u are da man to get 1´st spot well top 5 eny time, with some serious cooling:D
//Gabbax
vBulletin® v3.7.0, Copyright ©2000-2008, Jelsoft Enterprises Ltd.