PDA

View Full Version : 2600 mobile steppings

Agallion
08-04-2004, 12:25 PM
YAY my new 2600 mobile is here and my abit nf7-S will be here tomarow

im looking at the proc now turns out i got a good stepping (so i hear), IQYHA 0401 MPMW

what should i expect out of this chip??

im hoping ofr atleast 2.7 2.8 would bbe great but if everything goes insanly awsome i hope to nail 3.0ghz

and is teh L12 mod nessicary? does it just unlock certain multipliers?
Lithan
08-04-2004, 12:29 PM
1. You will not hit 3ghz on water.
2. You might get 2.8 if you get a very nice chip.
3. 2.6-2.7ghz is probably where you will fall.
4. The L12 mod doesn't unlock any multipliers. Your board will have multi's 4-12.5 unlocked. Anything else will require shorting pins.

Edit: Sorry: saw you are getting nf7-s. All multis will be unlocked.
LilGator
08-04-2004, 01:10 PM
Look at Lastviking's aircooled 2600 mobile:

http://upl.silentwhisper.net/uplfolders/upload0/cpuz2913mhz.jpg
Agallion
08-04-2004, 01:19 PM
what mobo is that on..i hope i can have success like that
Apocalipsis
08-04-2004, 01:24 PM
Aircooled? damn, that's a kickass chip.

Do you know what chip is that? Mobile 2600 47w or 2400 35w? stepping? week?

By the way, in that cpu-z screenie, which motherboard is using? I ask this because the known "Unknown CPU type" does not show, it reads correctly Mobile Athlon, is that a VIA board?

Apocalipsis.
STEvil
08-04-2004, 01:36 PM
probably a fully modded infinity unless he got a different board.
Apocalipsis
08-04-2004, 01:41 PM
Yep, I saw the thread about the RPMW steppings, it's an Infinity board, but didn't know it recognize correctly the mobiles now, perhaps DFI or some bios modders out there has added the code to do it.
Lithan
08-04-2004, 01:41 PM
That's a SS not prime stable I don't believe.
LilGator
08-04-2004, 04:25 PM
I don't remember him saying he wanted a prime stable 3GHz on water ;)
blinky
08-04-2004, 05:43 PM
last viking's air cooling is equivelant to everyone elses -20c chilled water :D
EnJoY
08-04-2004, 08:10 PM
...or atleast close. Last viking runs an ambient temp of 18c when he does his overclocking...so you can't really even compare it to watercooling as his temps are below most users loops.
LilGator
08-05-2004, 05:26 AM
I bet if he gets a nice chip, 2.8GHz should be doable 24/7...
HaLDoL
08-05-2004, 06:34 AM
Originally posted by LilGator
Look at Lastviking's aircooled 2600 mobile:

http://upl.silentwhisper.net/uplfolders/upload0/cpuz2913mhz.jpg
Nice, there goes my record :rolleyes:
LilGator
08-05-2004, 06:42 AM
Well, it is cold air :D
Lithan
08-05-2004, 07:11 AM
18c is actually only about 65*F. Not frigid. Just chilly.
Lastviking
08-05-2004, 11:38 AM
Originally posted by LilGator
Well, it is cold air :D

Nope.. i have summer here know.. the temp outside is 17c-> on the night(cant bench on night) . Beching on the morning temp is about 18-22c out then. Cpu temp whit delta @ max = 35c+. So it´s not coldair.. I don´t wana think how high this will go with coldair + 2.2v. Maybe 3.05ghz->. 3.25ghz-> whit danfors sc15f (400w)"only a evapor block is mising.
LilGator
08-05-2004, 11:56 AM
Well there ya go, so 3GHz with viking's chip, is possible on water ;)
Garrett
08-05-2004, 01:09 PM
I need cold water (5c) and 2.2v to reach 2770Mhz here... wish I had Lastviking's cpu here :D
Jethro
08-06-2004, 06:04 PM
week 401 IPMW getting me 2.75 219x12.5 with just 1.87 or so vcore! man these chips rock!
oozberg
08-08-2004, 01:31 AM
Not as good as my good old 0351MPMWs. 2.8Ghz @ 1.8v Prime stable 24/7 :D
Lastviking
08-08-2004, 04:26 AM
Originally posted by oozberg
Not as good as my good old 0351MPMWs. 2.8Ghz @ 1.8v Prime stable 24/7 :D

K hmm maybe i got air and you got prommy :D
Agallion
08-08-2004, 08:53 PM
im currently have MAJOR undervolting issues on teh NF7 board

liek i set it at 1.8 itll do 1.7ish